IKEA SMUSSLA 104.694.93 Bedside Table instructions manual

The IKEA SMUSSLA 104.694.93 is a modern bedside table featuring a clean design, durable construction, and practical storage. It includes a drawer for small items, an open shelf, and is designed for easy assembly. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Product Specifications 5. Care & Maintenance 6. Warranty & Support 7. Troubleshooting

Parts & Hardware

Before assembly, verify all parts are present. Key components: Tabletop, Side Panels, Drawer Front, Drawer Sides, Shelf, Back Panel, and Hardware Pack.

Part Name	Quantity	Description
Tabletop (A)	1	Main surface with pre-drilled holes
Side Panel (B)	2	Left and right side panels
Drawer Front (C)	1	Front face of the drawer
Drawer Sides (D)	2	Left and right sides of the drawer
Shelf (E)	1	Fixed middle shelf
Back Panel (F)	1	Particleboard back panel
Cam Lock (G)	8	Plastic cam locks for connections
Screw (H)	20	Wood screws of various lengths
Drawer Runner (I)	2	Metal slides for the drawer
Allen Key (J)	1	Tool provided for assembly

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

Assemble on a soft, clean surface to avoid scratches.
Keep small hardware away from children and pets.
Use the provided tools only; do not overtighten screws.
Check all connections are secure before use.

WARNING! Furniture can tip over. Secure to wall if possible, especially in households with children. Do not stand or sit on the table.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Prepare: Unpack all parts and lay them out. Identify each part using the diagram.
Attach Side Panels to Tabletop: Align side panels (B) with pre-drilled holes on the underside of the tabletop (A). Insert cam locks (G) and tighten with a screwdriver.
Install Back Panel: Slide the back panel (F) into the grooves on the side panels and secure with screws (H).
Install Fixed Shelf: Place the shelf (E) on the support pins inside the frame. Secure from underneath with provided screws.
Assemble the Drawer: Connect drawer sides (D) to drawer front (C) using cam locks. Attach the drawer bottom by sliding it into the grooves.
Install Drawer Runners: Attach the metal runners (I) to the inside of the frame and the sides of the drawer using screws.
Final Check: Ensure all screws and cam locks are tight. Test the drawer for smooth operation.

Tip: Do not fully tighten cam locks until all parts are aligned correctly.

Product Specifications

Product Name: SMUSSLA Bedside Table
Article Number: 104.694.93
Color: White
Material: Particleboard, Fiberboard, Plastic, Steel
Dimensions (W x D x H): 18.1" x 14.6" x 23.6" (46 cm x 37 cm x 60 cm)
Drawer Dimensions: 12.6" x 12.2" x 4.7" (32 cm x 31 cm x 12 cm)
Weight Capacity (Shelf): 11 lbs (5 kg)
Weight Capacity (Tabletop): 22 lbs (10 kg)
Package Weight: 24.3 lbs (11 kg)

Care & Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

Avoid abrasive cleaners, scouring pads, or solvents.
Do not place hot items directly on the surface; use coasters.
Protect from prolonged direct sunlight and high humidity.
Tighten hardware periodically to maintain stability.

CAUTION! Never soak the furniture with water. Liquid can damage the particleboard core.

Warranty & Support

IKEA limited warranty. Refer to the IKEA warranty brochure included in the package or available at IKEA stores for full terms and conditions.

Warranty Period: Varies by country. Typically 1-10 years for certain materials.
Support: For missing parts or assembly help, contact your local IKEA store or visit www.IKEA.com.
Recycling: Dispose of packaging and product responsibly according to local regulations.

Troubleshooting

Issue	Possible Cause	Solution
Drawer sticks or is difficult to open	Runners misaligned or overtightened screws	Loosen runner screws slightly and realign. Ensure drawer is square.
Table wobbles	Uneven floor or loose connections	Check all cam locks and screws are tight. Place on a level surface or use furniture pads.
Cam lock won't tighten	Cam not engaged with screw head	Disassemble the joint, ensure the screw is fully inserted into the cam, then retighten.
Missing part or hardware	Packaging error	Contact IKEA customer service with your article number (104.694.93) for replacement parts.
Scratches on surface during assembly	Assembled on hard surface	Use the cardboard packaging as a soft mat during assembly. Minor scratches can often be concealed with a touch-up pen.

Note: For persistent issues, do not use excessive force. Review the assembly steps or seek assistance.