IKEA SLÄKT 093.266.12 Bed Frame instructions manual

The IKEA SLÄKT 093.266.12 is a sturdy and functional bed frame designed for durability and ease of assembly. It features a slatted bed base for mattress support, integrated underbed storage options, and a clean, modern design suitable for various room styles. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

Parts & Hardware

Before assembly, verify all parts are present. Key components include side rails, headboard, footboard, center support beam, slatted bed base, and all necessary hardware.

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

1. Work with a partner: Some parts are large and heavy.
2. Use on level floor: Prevents wobbling and ensures stability.
3. Check all connections: Tighten all screws and cam locks fully.
4. Keep small parts away from children: Choking hazard.

WARNING! Do not exceed maximum weight capacity. Ensure the bed frame is fully assembled and secure before use.

Assembly Steps

Follow steps in order. Allow 45-60 minutes for assembly.

1. Prepare: Unpack all parts in the room where bed will be used.
2. Connect Headboard & Footboard: Attach to side rails using wooden dowels and cam locks.
3. Install Center Support Beam: Secure beam between side rails at the midpoint.
4. Attach Support Legs: Screw legs into pre-drilled holes on side rails and center beam.
5. Place Slatted Base: Lay slatted bed base onto the support ledges. Ensure it is centered.
6. Final Check: Gently shake the frame to test stability. Re-tighten any loose connections.

Tip: Do not fully tighten cam locks until all parts are aligned.

Mattress & Slatted Base

• Compatible Mattress Size: Designed for standard full/double size mattress.
• Slatted Base: Provides ventilation and support. Ensure slats are evenly spaced.
• Placement: Center mattress on the slatted base. Ensure no overhang.
• Adjustment: Some slats may be adjustable for firmness; refer to base markings.

Underbed Storage

The design allows for clearance under the frame. Use low-profile storage containers.

1. Measure clearance height after assembly.
2. Use storage boxes that slide easily on your floor type.
3. Do not store heavy items that could destabilize the frame.
4. Ensure containers do not interfere with support legs.

Note: This model does not include integrated drawers. Use separate storage solutions.

Care & Maintenance

Clean with a dry or slightly damp cloth. Do not use abrasive cleaners.

Monthly Check: Inspect and tighten cam locks and screws to maintain rigidity.

CAUTION! Avoid excessive moisture. Do not use wax or polish on the finished surface.

Weight Limits & Specifications

• Maximum Weight Capacity: 600 lbs (272 kg) evenly distributed.
• Frame Material: Particleboard, Fiberboard, Solid Wood.
• Finish: White stain.
• Overall Dimensions (Assembled): Approx. 80" L x 58" W x 12" H (excluding headboard height).
• Headboard Height: Additional 24".
• Underbed Clearance: Approx. 8".

Disassembly & Moving

To move, reverse assembly steps.

1. Remove mattress and slatted base.
2. Using the Allen key, loosen all cam locks in reverse order.
3. Gently separate parts, removing dowels.
4. Keep all hardware in a labeled bag.
5. Protect furniture surfaces during transport.

WARNING! Disassemble fully. Do not attempt to move the fully assembled bed frame.

Warranty Information

IKEA Limited Warranty applies. See IKEA warranty card included with purchase or visit www.IKEA-usa.com for details. Typically covers material and manufacturing defects for a specified period from date of purchase. Keep your receipt.

Troubleshooting

Customer Service: Visit www.IKEA-usa.com or call 1-888-888-4532 for spare parts or assistance.