IKEA SLÄKT 592.277.75 Bed Frame instructions manual

The IKEA SLÄKT 592.277.75 is a sturdy and modern bed frame designed for durability and easy assembly. It features a slatted bed base for mattress support, underbed storage options, and a clean Scandinavian design. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts and Hardware 2. Safety Instructions 3. Assembly Steps 4. Specifications 5. Care and Maintenance 6. Troubleshooting 7. Warranty Information

Parts and Hardware

Before assembly, verify all parts are present. Check packaging and compare with list below.

Part NumberDescriptionQuantity
100001Side Rail (Long)2
100002Headboard/Footboard Panel2
100003Center Support Beam1
100004Slatted Bed Base1 set
100005Metal Corner Brackets4
100006Wood Screws (M6 x 45mm)16
100007Allen Key (5mm)1
100008Plastic Glides4

Note: Contact IKEA if any parts are missing. Do not substitute hardware.

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

  1. Work Area: Clear, flat surface with enough space to lay out all parts.
  2. Lifting: Bed frame is heavy; use two people for lifting and assembly.
  3. Tools: Use only provided Allen key. Do not over-tighten screws.
  4. Stability: Ensure all connections are tight before use. Check periodically.
  5. Children: Keep small parts away from children during assembly.

WARNING! Do not exceed maximum weight limit. Ensure bed is on a level floor.

Assembly Steps

Follow steps in order. Allow 45-60 minutes for assembly.

  1. Step 1: Attach plastic glides to bottom of headboard and footboard panels.
  2. Step 2: Connect side rails to headboard using metal corner brackets and screws (finger-tight only).
  3. Step 3: Attach footboard to opposite ends of side rails using remaining brackets.
  4. Step 4: Place center support beam across middle of frame; secure to side rails with screws.
  5. Step 5: Lay slatted bed base onto frame, ensuring it rests evenly on support rails.
  6. Step 6: Tighten all screws firmly with Allen key. Do not strip threads.
  7. Step 7: Place mattress on slatted base. Ensure mattress size matches bed frame.

Tip: Keep packaging until assembly is complete and verified.

Specifications

Care and Maintenance

Proper care extends the life of your bed frame.

  1. Cleaning: Wipe with damp cloth; dry immediately. Do not use abrasive cleaners.
  2. Inspection: Check screws and brackets every 6 months; tighten if loose.
  3. Moving: Disassemble before moving to prevent damage. Keep hardware organized.
  4. Mattress: Use a supportive mattress. Rotate mattress regularly for even wear.
  5. Environment: Avoid excessive humidity or direct sunlight to prevent warping.

CAUTION! Do not drag bed frame across floor; lift to move.

Troubleshooting

IssuePossible CauseSolution
Squeaking noisesLoose screws or bracketsTighten all connections with Allen key.
Frame wobblesUneven floor or loose jointsCheck floor level; tighten corner brackets.
Slats saggingExcessive weight or misalignmentRedistribute weight; ensure slats are properly seated.
Difficulty assemblingParts mislabeled or incorrect orientationReview diagrams; ensure parts match illustrations.
Scratches during assemblyRough surface or toolsAssemble on soft surface; use care with tools.

Note: For missing or damaged parts, contact IKEA customer service.

Warranty Information

IKEA provides a 10-year limited warranty from date of purchase. Warranty covers defects in materials and workmanship under normal household use. Proof of purchase required.

Exclusions: Damage from improper assembly, accidents, modification, commercial use, or improper care. Normal wear and tear not covered.

Service: For warranty claims or support, contact IKEA customer service at 1-888-888-4532 or visit www.ikea.com.

IKEA SLÄKT 592.277.75 Bed Frame instructions manual © - All Rights Reserved 2025