IKEA SLÄKT 092.394.55 Pullout Bed instructions manual

The IKEA SLÄKT 092.394.55 is a versatile pullout bed designed for space-saving functionality, featuring a sturdy metal frame, integrated mattress support, smooth gliding mechanism, and safety locks. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Safety Information 2. Parts & Tools 3. Assembly Instructions 4. Specifications 5. Operation & Use 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Safety Information

Key safety guidelines for assembly and use.

Warning	Description
Weight Limit	Maximum load capacity: 220 lbs (100 kg) per sleeping surface.
Assembly Surface	Assemble on a clean, flat, protected surface to avoid scratches.
Tool Safety	Use included tools only; keep away from children.
Pinch Points	Keep hands clear of moving parts during pullout operation.
Stability Check	Ensure all bolts are tightened and frame is stable before use.
Child Safety	Do not allow children to play on or under the bed.
Mattress Fit	Use only recommended mattress size to prevent instability.
Regular Inspection	Check bolts and joints every 3 months for tightness.

Parts & Tools

Included components and required tools.

Frame Parts: Side rails (2), headboard, footboard, center support beam, slats, pullout mechanism.
Hardware: Bolts, screws, washers, cam locks, dowels.
Tools Included: Allen key, screwdriver.
Additional Tools Needed: None.

IMPORTANT! Verify all parts against packing list before assembly. Contact IKEA for missing parts.

Assembly Instructions

Step-by-step assembly guide.

Unpack all parts and lay them out in a clear space.
Attach headboard to side rails using provided bolts and Allen key.
Connect footboard to opposite ends of side rails.
Install center support beam and secure with cam locks.
Attach mattress slats to side rails and center beam.
Install pullout gliding mechanism according to diagram.
Test pullout function and ensure smooth movement.
Tighten all bolts and confirm frame stability.

CAUTION! Two-person assembly recommended. Follow steps in order.

Specifications

Model: SLÄKT 092.394.55
Type: Pullout Bed with Metal Frame
Mattress Size: Twin (39" x 75") / Single (90 x 200 cm)
Extended Dimensions: 39" W x 75" L x 12" H (approx.)
Collapsed Dimensions: 39" W x 41" D x 12" H (approx.)
Material: Steel frame, Powder-coated finish
Weight Capacity: 220 lbs (100 kg) per bed
Color: Black-Brown
Warranty: 10-year limited warranty

Operation & Use

How to use the pullout bed safely.

Pulling Out: Grasp handle firmly, pull straight out until mechanism locks. Ensure area is clear.

Pushing In: Release lock lever, push bed inward smoothly until fully closed.

Mattress Installation: Place mattress on slats after bed is fully extended. Ensure even placement.

Locking Mechanism: Automatic safety lock engages when fully extended. Always verify lock before use.

Care & Maintenance

Cleaning and upkeep instructions.

Wipe frame with dry or slightly damp cloth. Do not use abrasive cleaners.

Check bolts and joints every 3 months; tighten if necessary.

Lubricate pullout mechanism with silicone spray annually.

CAUTION! Do not use harsh chemicals; avoid excessive moisture.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Bed does not pull out smoothly	Obstruction or misalignment	Clear track; check alignment of gliders; lubricate.
Wobbling or instability	Loose bolts	Tighten all bolts and cam locks.
Lock not engaging	Mechanism misaligned	Check lock arm; adjust if bent; ensure full extension.
Squeaking noise	Metal friction	Apply silicone spray to moving parts.
Slats slipping	Clips not secured	Reattach slat clips to side rails.

Note: For persistent issues, contact IKEA support.

Warranty & Support

10-year limited warranty against manufacturing defects. Proof of purchase required.

For assembly help, missing parts, or warranty claims:

Visit www.ikea.com or call 1-888-888-4532.