IKEA SKÅPAFORS 105.050.28 Chair instructions manual

The IKEA SKÅPAFORS 105.050.28 is a modern dining chair featuring a sturdy steel frame, a comfortable curved plywood seat and backrest, and a durable powder-coated finish. It is designed for everyday use in dining rooms, kitchens, or home offices. This manual covers assembly, safety, care, and usage instructions to ensure optimal performance and longevity.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Adjustments & Usage 6. Care & Maintenance 7. Warranty Information 8. Troubleshooting

Parts & Tools Included

Before assembly, verify all parts are present and undamaged.

Part Name	Quantity	Description
Chair Frame (Main Structure)	1	Pre-assembled steel frame with legs
Seat Panel	1	Curved plywood seat with pre-drilled holes
Backrest Panel	1	Curved plywood backrest with pre-drilled holes
Hex Key (Allen Wrench)	1	Tool for tightening bolts
Bolts & Washers Set	1 pack	All necessary hardware for assembly
Protective Felt Pads	4	For floor protection on chair legs
Instruction Manual	1	This document

Safety Information

Read all instructions before assembly and use.

Assembly Surface: Assemble on a clean, soft surface (e.g., carpet or blanket) to prevent scratching.
Weight Limit: Maximum load capacity is 110 kg (243 lbs). Do not exceed.
Stability: Ensure all bolts are fully tightened. Do not stand on the chair or use as a step ladder.
Children: Supervise children to prevent tipping or misuse.
Inspection: Periodically check tightness of connections.

WARNING! Improper assembly or exceeding weight limit can cause injury or damage. Assemble with care.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Follow steps in order.

Prepare: Unpack all parts and lay them out. Identify the hex key and hardware pack.
Attach Backrest: Align the backrest panel with the rear slots on the frame. Insert the provided bolts through the pre-drilled holes from the inside of the frame. Hand-tighten with the hex key.
Attach Seat: Place the seat panel onto the frame, aligning its holes with the corresponding brackets. Insert bolts and washers from underneath. Hand-tighten.
Final Tightening: Once all bolts are in place, use the hex key to firmly tighten every bolt. Ensure no parts are loose or wobbly.
Apply Felt Pads: Peel off the backing and apply one felt pad to the bottom of each leg to protect your floor.
Inspection: Gently rock the chair to test stability. Re-tighten if necessary.

CAUTION! Do not overtighten bolts, as this may strip the threads. Tighten until snug and secure.

Specifications

Product Name: SKÅPAFORS
Article Number: 105.050.28
Dimensions (W x D x H): 47 cm x 52 cm x 81 cm (18.5" x 20.5" x 31.9")
Seat Height: 46 cm (18.1")
Frame Material: Steel, powder-coated
Seat & Back Material: Plywood, clear acrylic lacquer
Weight Capacity: 110 kg (243 lbs)
Net Weight: 5.8 kg (12.8 lbs)
Color: Black/Brown

Adjustments & Usage

This chair is not height-adjustable. For optimal comfort and safety:

Proper Seating: Sit with your back against the backrest and feet flat on the floor.

Moving the Chair: Lift the chair to reposition it. Dragging may damage floors and chair legs.

Stacking: This model is not designed for stacking. Store chairs individually.

Care & Maintenance

Proper care will extend the life of your chair.

Frame (Steel): Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners or solvents.
Seat & Back (Plywood/Lacquer): Clean with a slightly damp cloth. For stubborn marks, use a mild soap solution. Wipe dry.
Felt Pads: Replace if they become worn or dirty to maintain floor protection.
Storage: Store in a dry place away from direct sunlight and extreme temperatures.

CAUTION! Never soak or submerge any part of the chair. Avoid steam cleaners.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at www.ikea.com. The warranty covers material and manufacturing defects under normal household use for the specified period. Keep your receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chair is wobbly	Bolts not fully tightened	Check and tighten all bolts with the hex key.
Seat or backrest feels loose	Missing or stripped bolts	Ensure all bolts are present. If threads are stripped, contact IKEA for a replacement part.
Scratching floor	Felt pads missing or worn	Apply or replace the felt pads on the chair legs.
Squeaking noise	Metal parts rubbing	Check connections and tighten bolts. A small amount of furniture wax on joints may help.
Difficulty assembling	Parts misaligned	Disassemble and restart, ensuring parts are oriented correctly as shown in diagrams.

Missing Parts or Support: For spare parts, assembly help, or other inquiries, visit www.ikea.com or contact your local IKEA store.