IKEA SKURUP 304.711.50 Wall Lamp instructions manual

The IKEA SKURUP 304.711.50 is a modern, adjustable wall lamp designed for focused lighting. It features a metal shade, a flexible arm for directing light, an E27 socket (max 15W LED or 40W incandescent), and a wall-mounted design. Below are key sections for safety, features, installation, setup, operation, and care.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Adjustments 6. Connecting to Power 7. Using the Lamp 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Metal shade, adjustable arm, wall bracket, E27 socket, cable, and mounting hardware.

Feature	Description
Metal shade	Directs light and provides a modern finish
Adjustable arm	Flexible arm to direct light where needed
Wall bracket	For secure mounting to the wall
E27 socket	Standard socket for bulb (max 15W LED or 40W incandescent)
Mounting hardware	Screws and wall plugs included for installation
Cable	Power cord with plug (length as per model)
ON/OFF switch	Integrated switch on the cord or lamp base
Adjustable angle	Shade and arm can be tilted for optimal lighting
Designed for indoor use	Suitable for living rooms, bedrooms, studies
Modern design	Clean lines, neutral color (as per variant)

Installation

Unpack and inspect all parts. Ensure you have the correct tools (screwdriver, drill, level).

Choose location: Select a wall near a power outlet, away from heat sources and moisture.
Mark holes: Use the wall bracket as a template to mark screw holes. Ensure it is level.
Drill holes: Drill holes at marked points and insert wall plugs (if needed for your wall type).
Attach bracket: Secure the wall bracket to the wall using provided screws.
Attach lamp: Hang the lamp onto the bracket and secure it according to instructions.
Connect cable: Route the cable neatly to the power outlet.

WARNING! Ensure power is turned off at the circuit breaker before installation. Lamp may be heavy; mount securely to support weight.

First-Time Setup

After installation, prepare the lamp for use.

Insert bulb: Use an E27 bulb (max 15W LED or 40W incandescent). Do not exceed wattage.
Adjust arm: Position the flexible arm and shade to desired angle.
Plug in: Connect the power cord to a wall outlet.
Test: Turn on using the switch to ensure proper operation.

CAUTION! Do not touch bulb when hot. Allow to cool before adjusting.

Specifications

Model: SKURUP 304.711.50
Type: Wall lamp, adjustable
Material: Metal shade, steel arm
Socket: E27
Max Bulb Wattage: 15W LED or 40W incandescent
Voltage: 120V AC, 60Hz (for North America)
Cable Length: Approximately 1.5 meters (varies by region)
Dimensions: Height adjustable; refer to packaging for exact measurements
Weight: As per packaging
Color: Black/White (as per variant)
Certifications: UL listed or equivalent for safety

Controls and Adjustments

Primary control is the ON/OFF switch on the cord or lamp base.

Adjustments: The flexible arm can be bent to direct light. The shade may also be tilted. Adjust while the lamp is cool and powered off for safety.

Note: No remote or dimmer included unless specified for your model variant.

Connecting to Power

The lamp includes a power cord with plug.

Ensure the lamp switch is OFF.
Plug the cord into a standard 120V AC wall outlet.
Do not use extension cords permanently; if necessary, use a heavy-duty cord rated for the lamp's wattage.
Keep cord away from heat and sharp edges.

Tip: Use a surge protector for added safety in areas with unstable power.

Using the Lamp

Designed for focused task or accent lighting.

Turn ON/OFF: Use the switch on the cord or base.
Adjust light direction: Gently bend the arm and tilt the shade while the lamp is off and cool.
Replace bulb: When bulb burns out, turn off and unplug lamp. Let bulb cool, then unscrew and replace with same type/wattage.
Optimal use: Ideal for reading, work desks, or highlighting wall art.

WARNING! Do not exceed maximum bulb wattage. Do not use in bathrooms or other wet locations unless rated for such use.

Safety Features

Built-in safety: Proper insulation, secure mounting bracket, and approved materials. Overheating protection relies on correct bulb wattage.

Important: Always use bulbs within specified wattage to prevent overheating and fire risk.

Care & Cleaning

Unplug lamp before cleaning. Use a dry, soft cloth to dust the shade and arm. For stubborn dirt, use a slightly damp cloth and dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or liquids on electrical parts. Never immerse the lamp in water.

Regulatory Information

Complies with applicable safety standards (e.g., UL in USA). This product is designed for indoor use in dry locations. Copyright and design rights belong to Inter IKEA Systems B.V. For more information, visit www.ikea.com or contact IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; no power; switch off	Replace bulb; check outlet/power; ensure switch is ON.
Lamp flickers	Loose bulb; faulty bulb; poor connection	Tighten bulb; try new bulb; check plug connection.
Lamp gets very hot	Bulb wattage too high	Replace with correct wattage bulb (max 15W LED/40W incandescent).
Lamp arm is stiff or loose	Adjustment mechanism may need settling	Gently move arm through full range to loosen; if loose, tighten any visible screws (if accessible).
Unstable on wall	Mounting not secure; wall material unsuitable	Re-mount using appropriate wall anchors for your wall type; ensure screws are tight.

Service: For defects, contact IKEA customer service or return to store with proof of purchase. Do not attempt to repair electrical parts yourself.