The IKEA SKURUP 204.899.66 is a versatile spotlight designed for directional lighting. It features an adjustable head, a durable metal construction, and is intended for indoor use. This manual covers safety information, assembly, installation, operation, maintenance, and troubleshooting. Ensure you read all instructions before proceeding.
Important safety instructions to prevent injury and damage.
| Warning | Description |
|---|---|
| Electrical Safety | Always turn off power at the circuit breaker before installation or maintenance. |
| Weight Limit | Ensure mounting surface can support the spotlight's weight. |
| Heat Warning | Bulb becomes hot during use; allow to cool before touching. |
| Indoor Use Only | Designed for dry, indoor environments only. |
| Correct Bulb | Use only the specified bulb type and wattage. |
Unpack and verify all parts are present before assembly.
NOTE: Contact IKEA if any parts are missing. Do not attempt installation without all components.
Follow these steps to assemble the spotlight.
CAUTION! Handle components carefully to avoid scratching the finish.
Installing the spotlight on a wall or ceiling.
How to use and adjust the spotlight.
Adjustment: Loosen the joint slightly to tilt the head, then tighten to lock in position. Rotate the head horizontally for directional lighting.
Switching: Connect to a wall switch or dimmer (if compatible). Ensure the switch is rated for the spotlight's electrical load.
Replacing the bulb when it burns out.
WARNING! Do not exceed the maximum wattage. Use only E14 type bulbs.
Keeping your spotlight clean and functional.
Unplug or turn off power before cleaning. Use a soft, dry cloth to wipe the surface. For stubborn marks, use a damp cloth with mild soap, then dry immediately.
CAUTION! Do not use abrasive cleaners, solvents, or water sprays.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Light does not turn on | Power off / Bulb burnt out | Check power supply; replace bulb. |
| Light flickers | Loose bulb / Faulty connection | Tighten bulb; check wiring connections. |
| Head will not stay in position | Joint is loose | Tighten the adjustment screw. |
| Overheating | Bulb wattage too high | Replace with correct wattage bulb. |
| Poor light direction | Incorrect adjustment | Re-adjust head angle and tighten. |
Note: If problems persist, contact a qualified electrician.
IKEA limited warranty applies. For product support, contact IKEA customer service or visit www.ikea.com.
Service: Refer to your IKEA receipt for warranty details. Keep this manual for future reference.