The IKEA SKURUP 103.959.30 is a series of ceiling-mounted light fixtures designed for indoor use. This manual covers the SKURUP spotlight and pendant light models, providing essential information for safe unpacking, installation, bulb replacement, operation, care, and troubleshooting. The fixture features a simple, adjustable design suitable for various room settings.
Read all instructions before installation and keep for future reference.
WARNING! Risk of electric shock or fire if installed incorrectly. Ensure all connections are secure and insulated.
Open package carefully and verify all parts are present.
| Part Description | Quantity | Check |
|---|---|---|
| Ceiling fixture base plate | 1 | □ |
| Adjustable spotlight head(s) or pendant shade | As per model | □ |
| Mounting screws & wall plugs | 1 set | □ |
| Wire connectors (caps) | 2-3 | □ |
| Instruction manual | 1 | □ |
Note: Contact IKEA if any parts are missing or damaged. Do not attempt installation.
Step 1: Prepare the Area
Turn off power at the breaker. Use a voltage tester to confirm wires are not live. Remove old fixture if present.
Step 2: Mount the Base Plate
Align the base plate with the ceiling electrical box. Use provided screws to secure it firmly to the box.
Step 3: Connect Wires
Connect fixture wires to house wires using wire connectors: Black/Red (Live/Hot) to Black, White (Neutral) to White, Green/Yellow (Ground) to bare copper or green ground wire.
Step 4: Attach Fixture
Tuck wires neatly into the box. Align fixture with base plate and secure with provided locking mechanism or screws.
Step 5: Install Bulb(s)
Insert compatible LED bulb(s). Do not exceed max wattage.
Step 6: Final Check
Restore power and test the light.
CAUTION! Ensure no wires are pinched and all connections are tight.
Tip: Use a soft cloth when handling bulbs to avoid fingerprints on glass.
For Spotlight Models: The head can be tilted and rotated. Grip the head and point it in the desired direction. Tighten any adjustment knobs slightly to hold position.
For Pendant Models: The cord length is typically fixed. Ensure the pendant hangs level.
Note: Do not force adjustments beyond their natural stop point.
Turn off and cool before cleaning. Use a dry, soft cloth to dust the fixture. For tougher marks, use a slightly damp cloth and dry immediately. Do not use abrasive cleaners, chemicals, or spray directly on the fixture.
CAUTION! Never immerse the fixture in water or use steam cleaners.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Light does not turn on | Power off / Bulb faulty / Loose connection | Check breaker; replace bulb; ensure switch is on; check wire connections. |
| Light flickers | Loose bulb / Incompatible dimmer / Faulty bulb | Secure bulb; ensure dimmer is LED-compatible; try a different bulb. |
| Fixture is hot | Bulb wattage too high | Replace with a bulb at or below max rated wattage. |
| Buzzing sound | Incompatible dimmer / Transformer issue | Use a compatible LED dimmer; ensure all components are secure. |
| Fixture loose | Mounting screws not tight | Turn off power and tighten mounting hardware. |
This IKEA product is covered by a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores for terms and duration.
For Support:
IKEA Customer Service: 1-888-888-4532
Website: www.ikea.com
Visit an IKEA store for spare parts or further assistance.
Recycling: Dispose of the product and packaging according to local regulations for electronic waste and recyclable materials.