IKEA SKURUP 005.051.37 Spotlight instructions manual

The IKEA SKURUP 005.051.37 is an adjustable spotlight designed for indoor use, featuring a flexible arm for directional lighting, an E27 socket, and a simple, modern design. It requires assembly and proper installation. Below are key sections for safety, features, assembly, installation, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Adjustable spotlight head, flexible gooseneck arm, ceiling/wall mount bracket, E27 lamp socket, and necessary hardware.

Safety Information

Read all instructions before assembly and installation.

1. Disconnect Power: Always turn off power at the circuit breaker before installation or maintenance.
2. Correct Bulb: Use only E27 bulbs with wattage equal to or less than the maximum specified on the socket label.
3. Secure Mounting: Ensure the mounting surface is solid and can support the weight of the light.
4. Professional Help: If unsure about electrical work, consult a qualified electrician.

WARNING! Risk of electric shock. Do not install or handle with wet hands. Keep away from children during assembly.

Package Contents

Unpack and verify all parts are present before starting.

• Spotlight head with integrated flexible arm
• Mounting bracket
• Hardware pack (screws, wall plugs, possibly a mounting plate)
• Instruction manual (this sheet)

Note: Light bulb is not included. E27 bulb must be purchased separately.

Assembly Instructions

Assemble the light fixture before mounting it to the wall or ceiling.

1. Attach the flexible arm to the spotlight head if not pre-assembled (usually threaded connection).
2. Feed the electrical wires from the ceiling/wall cable through the mounting bracket and then through the base of the flexible arm.
3. Connect the fixture wires to the household wiring: Live (brown/black) to Live, Neutral (blue/white) to Neutral, and Earth (green/yellow) to Earth (if present). Use appropriate wire connectors.
4. Secure the wire connections inside the mounting bracket or base.
5. Attach the spotlight assembly (arm and head) to the mounting bracket as per design (may screw or clip into place).

CAUTION! Ensure all electrical connections are tight and insulated. Do not pinch wires.

Installation

Mount the assembled fixture to your desired location.

1. Turn OFF power at the main circuit breaker.
2. Hold the mounting bracket against the ceiling/wall at the desired location. Mark the screw holes.
3. Drill holes at the marks and insert the supplied wall plugs (if mounting into drywall or masonry).
4. Secure the mounting bracket to the surface using the provided screws.
5. Complete the electrical connection as described in the Assembly section (Step 3).
6. Once connected, tuck wires neatly into the bracket and attach the spotlight assembly to the bracket.
7. Install the appropriate E27 bulb (not included).
8. Restore power and test the light.

Tip: For ceiling installation, ensure the electrical box is rated to support the fixture's weight.

Operation & Adjustment

Once installed, the spotlight is ready for use.

1. Turn the light on/off using your wall switch.
2. To adjust the light direction: Gently bend the flexible gooseneck arm to position the spotlight head. The arm will hold its position.
3. Fine-tune the beam by rotating and tilting the spotlight head itself.

Note: Avoid excessive or sharp bending of the flexible arm, as this may damage it over time.

Bulb Replacement

Replace the bulb when it burns out.

1. Turn OFF the light switch and allow the old bulb to cool completely.
2. Gently grip the bulb and turn it counterclockwise to unscrew it from the E27 socket.
3. Insert a new E27 bulb of the correct type and wattage (see socket label for max wattage, e.g., Max 60W).
4. Screw the new bulb in clockwise until snug. Do not overtighten.
5. Turn the power back on to test.

WARNING! Never use a bulb with a higher wattage than specified, as it may cause overheating and fire.

Care & Cleaning

Unplug/turn off power before cleaning.

1. Use a soft, dry or slightly damp cloth to wipe the exterior of the spotlight and arm.
2. Do not use abrasive cleaners, chemical solvents, or scouring pads.
3. For the shade/head, dust gently. Avoid getting moisture inside the fixture or socket.

CAUTION! Do not immerse any part of the fixture in water or other liquids.

Specifications

• Product Name: SKURUP Spotlight
• Article Number: 005.051.37
• Socket Type: E27
• Max Bulb Wattage: Check label on socket (e.g., 60W max)
• Voltage: Compatible with standard household voltage (e.g., 120V/230V depending on region).
• Material: Metal, plastic.
• Finish: Typically black or white.
• Intended Use: Indoor use only.

Troubleshooting

Disposal: Dispose of the product and any packaging according to local regulations for electronic waste and recyclables.

Warranty & Support: For assistance, contact IKEA customer service or visit www.ikea.com.