IKEA SKRUVBY 405.319.88 Table instructions manual

The IKEA SKRUVBY 405.319.88 is a versatile table designed for assembly, featuring a modern Scandinavian design, durable construction, and multiple size options. This manual provides essential information for safe unpacking, assembly, use, care, and troubleshooting of your new table. Below are key sections covering safety, parts identification, step-by-step assembly, usage guidelines, and maintenance.

Parts & Components

Key components included in the package: Tabletop, Legs (4), Mounting brackets, Screws, Cam locks, Dowels, Allen key.

Tools Required

Tools provided: Allen key. Tools you may need: Phillips screwdriver, rubber mallet, soft cloth.

1. Allen key (included): For tightening cam locks and screws.
2. Phillips screwdriver: For additional screw tightening if needed.
3. Rubber mallet: For gently tapping dowels and parts into place.
4. Soft cloth: To protect surfaces during assembly.

NOTE: Use only the provided tools or suitable equivalents. Do not over-tighten screws.

Safety Instructions

Read all instructions before assembly. Ensure a safe workspace.

1. Unpack on a soft, clean surface to avoid scratches.
2. Keep small parts away from children and pets.
3. Assemble with a partner for larger components.
4. Do not stand on the table after assembly.
5. Ensure all screws and connectors are fully tightened before use.

WARNING! Table is heavy; lift with care using legs, not the tabletop. Ensure stable, level surface for assembly and use.

Step-by-Step Assembly

Follow these steps in order. Allow 30-60 minutes for assembly.

1. Prepare: Unpack all parts, check against parts list. Lay tabletop upside down on a soft surface.
2. Attach Brackets: Position mounting brackets on the underside of the tabletop at marked locations. Secure with provided screws using the Allen key.
3. Insert Dowels: If applicable, insert wooden dowels into pre-drilled holes on the tabletop or legs for alignment.
4. Attach Legs: Align each leg with its bracket. Insert and tighten the locking screws through the bracket into the leg. Ensure legs are perpendicular to the tabletop.
5. Secure Cam Locks: For models with cam locks, insert cam into designated hole and turn 90° clockwise to lock using the Allen key.
6. Final Check: Turn the table right-side up. Check stability and tighten any loose screws. Wipe clean with a dry cloth.

CAUTION! Do not overtighten screws, as this may strip the material. Assemble on a carpet or blanket to prevent damage.

Specifications

• Model: SKRUVBY 405.319.88
• Dimensions (L x W x H): 120cm x 80cm x 74cm (approx.)
• Tabletop Material: Particleboard with melamine foil or solid wood veneer.
• Leg Material: Steel with powder coating or solid wood.
• Weight Capacity: Up to 50kg (evenly distributed).
• Color/Finish: As specified (e.g., white, black-brown, oak effect).
• Packaged Weight: Approximately 15-20kg.
• Required Tools: Allen key (included).

Usage & Care

Designed for indoor use as a dining, work, or occasional table.

Proper Use: Place on a flat, stable surface. Distribute weight evenly. Do not exceed weight limit. Avoid placing hot items directly on surface; use coasters or mats. Do not drag the table; lift to move.

Environment: Keep away from direct sunlight, heat sources, and high humidity to prevent warping or fading.

Adjustments & Features

Some models may include adjustable leg levelers or extendable leaves.

1. Leveling Feet: If your model has adjustable feet, turn clockwise to raise, counterclockwise to lower for stability on uneven floors.
2. Extension: For tables with leaves, unlock mechanism under tabletop, pull apart, insert leaf, and lock back into place.
3. Protective Pads: Attach felt pads (if included) to bottom of legs to protect floors.

Tip: Check and re-tighten screws every few months to maintain stability.

Cleaning & Maintenance

Unplug any nearby electronics before cleaning. Use appropriate cleaners for the material.

1. Daily: Wipe with a soft, dry or slightly damp cloth.
2. Stains: Use mild soapy water; wipe dry immediately. Do not use abrasive cleaners, scouring pads, or solvents.
3. Wood Veneer: Use furniture polish suitable for the finish.
4. Metal Legs: Clean with a damp cloth; dry thoroughly.

CAUTION! Never soak the table or allow liquids to pool, especially on seams or edges. Avoid steam cleaners.

Warranty Information

IKEA limited warranty applies. Refer to the IKEA warranty leaflet included with your purchase or visit www.ikea.com for details. Warranty covers material and manufacturing defects under normal household use. Keep your receipt as proof of purchase. For service, contact your local IKEA store or call customer support.

Troubleshooting

Missing Parts? Contact IKEA customer service with your product number (405.319.88) for replacement parts.

Support: Visit www.ikea.com or your local IKEA store for assistance.