IKEA SKRUVBY 205.088.42 Cabinet instructions manual

The IKEA SKRUVBY 205.088.42 is a versatile cabinet designed for assembly and installation in various home settings. This manual provides essential information for safe handling, assembly, installation, use, and maintenance of the cabinet. Below are key sections covering safety warnings, parts identification, step-by-step assembly, installation guidelines, care instructions, and troubleshooting.

1. Safety Information 2. Parts & Hardware 3. Assembly Instructions 4. Installation Guide 5. Specifications 6. Usage & Features 7. Adjustments & Leveling 8. Care & Maintenance 9. Warranty Information 10. Troubleshooting

Safety Information

Read all instructions before assembly. Ensure a safe working environment.

Warning	Description
Lifting Hazard	Cabinet is heavy. Use two people for lifting and moving to avoid injury.
Secure Assembly	Ensure all screws and fasteners are tightened securely to prevent instability.
Wall Anchoring	To prevent tipping, especially in homes with children, the cabinet MUST be anchored to the wall using the provided hardware.
Tool Safety	Use appropriate tools. Keep tools away from children during and after assembly.
Surface Protection	Assemble on a soft, clean surface to avoid scratching the cabinet or your floor.

Parts & Hardware

Unpack all parts and hardware. Check against the parts list before starting.

Main Cabinet Panels: Side panels, top, bottom, back panel, door(s), shelf.
Hardware Pack: Contains screws, cam locks, dowels, wall anchoring device, Allen key.
Optional Components: Door handles (if not pre-attached), adjustable feet.

IMPORTANT! Do not discard any packaging until assembly is complete to ensure no parts are missing.

Assembly Instructions

Follow steps in numerical order. Do not fully tighten screws until the structure is aligned.

Prepare Workspace: Lay out all parts on a clean, flat, protected surface.
Connect Side Panels to Bottom: Insert dowels into pre-drilled holes. Attach using cam locks.
Attach Top Panel: Align top panel with side panels and secure using the same method.
Install Back Panel: Slide the fiberboard back panel into the grooves. Secure with provided nails or screws.
Install Shelf: Insert the shelf onto the support pins at the desired height.
Attach Door(s): Hang the door(s) on the hinges. Adjust hinge screws for proper alignment and closing.
Attach Handles: If provided separately, screw handles onto the door(s).
Install Adjustable Feet: Screw feet into the bottom of the cabinet base for leveling.

CAUTION! Overtightening screws can strip the particleboard. Tighten firmly but with care.

Installation Guide

Once assembled, position the cabinet and secure it to the wall.

Positioning: Move cabinet to desired location. Ensure there is adequate space for door swing.
Leveling: Adjust the feet using a wrench or by hand until the cabinet is level and does not rock.
Wall Anchoring (CRITICAL):
1. Locate a solid wall stud using a stud finder.
2. Position the cabinet against the wall.
3. Use the provided wall bracket and screws to attach the top rear of the cabinet to the wall stud.
4. Ensure the bracket is tight and the cabinet cannot be pulled forward.

Specifications

Product Name: SKRUVBY
Article Number: 205.088.42
Dimensions (W x H x D): Approximately 60cm x 120cm x 40cm (Check packaging for exact dimensions).
Weight: Varies; see packaging for net weight.
Material: Particleboard, Fiberboard, Plastic, Steel hardware.
Finish: White, Ash, or other as specified on packaging.
Max Load per Shelf: Refer to label inside the cabinet (typically 15-25 kg).
Tools Required: Phillips screwdriver, hammer (for back panel nails), Allen key (provided).

Usage & Features

This cabinet is designed for general storage in living rooms, bedrooms, or hallways.

Features: Adjustable shelf for flexible storage, soft-closing hinges (where applicable), pre-drilled holes for easy assembly, wall anchoring device included for safety.

Usage Tips: - Distribute weight evenly across the shelf. - Do not exceed the maximum load indicated. - Use for storing books, decorative items, media, or folded clothing. - Avoid placing near direct heat sources or in areas of high humidity.

Adjustments & Leveling

After installation, you may need to make minor adjustments.

Door Alignment: If the door is uneven or doesn't close flush, use the Allen key to adjust the hinge screws. Turn the screw at the back of the hinge to move the door in/out; turn the screw on the side of the hinge to move it up/down.
Leveling: If the cabinet rocks, adjust the individual feet by twisting them clockwise to lower that corner or counter-clockwise to raise it.
Shelf Height: To change the shelf position, lift it off the support pins and place it on a different set of pins.

Care & Maintenance

Proper care will extend the life of your cabinet.

Cleaning: Wipe surfaces with a soft, damp cloth. Use a mild detergent if needed. Dry immediately with a clean cloth.

DO NOT: Use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive water.

Maintenance: Periodically check and tighten screws, especially on hinges and wall anchors. Inspect for stability.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at www.ikea.com. The warranty covers material and manufacturing defects under normal home use for the specified period. Keep your receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Cabinet is wobbly	Uneven floor; screws loose; not anchored	Adjust feet to level; tighten all screws and cam locks; ensure wall anchor is securely attached to a stud.
Door does not close properly	Misaligned hinges; swollen wood (humidity)	Adjust hinge screws for alignment. Ensure room humidity is normal.
Shelves sagging	Weight limit exceeded	Remove excess weight. Do not exceed the maximum load specified.
Screw won't tighten	Stripped hole in particleboard	Do not overtighten. For cam locks, ensure the cam is turned fully. For critical stripped holes, use a wood filler and re-drill, or contact IKEA support.
Missing part	Part not unpacked or not included	Check all packaging thoroughly. Contact IKEA customer service with your article number (205.088.42) for replacement parts.

IKEA Customer Support: Visit www.ikea.com or contact your local IKEA store for assistance with missing parts or assembly questions.