IKEA SKOGSTA 102.979.58 Stool instructions manual

The IKEA SKOGSTA stool (article number 102.979.58) is a solid acacia wood stool designed for indoor use. It features a natural wood finish, a sturdy three-legged design for stability, and a smooth, contoured seat for comfort. This manual provides essential information for safe assembly, use, care, and maintenance of your SKOGSTA stool.

1. Package Contents & Tools Needed 2. Safety Information 3. Assembly Instructions 4. Technical Specifications 5. Care & Maintenance 6. Warranty & Support 7. Troubleshooting

Package Contents & Tools Needed

Before assembly, verify all parts are present and undamaged.

Part DescriptionQuantityArticle Number
SKOGSTA Stool Seat (Acacia wood)1102.979.58
Stool Leg (Acacia wood)3Included
Pre-installed Threaded Inserts3Included
Allen Key (Hex Key)1Included
Wood Screws3Included
Instruction Manual1-

Tools Needed: No additional tools required. The included Allen key is sufficient for assembly.

Safety Information

Read all instructions before assembly and use.

  1. Assembly Surface: Assemble on a soft, clean surface (e.g., carpet, blanket) to prevent scratching the wood.
  2. Weight Capacity: Maximum load: 110 kg (242 lbs). Do not exceed this limit.
  3. Stability: Ensure all legs are firmly attached. The stool is stable on flat, level surfaces only.
  4. Use: Designed for indoor residential use. Not suitable for outdoor use, commercial settings, or as a step ladder.
  5. Children: Do not allow children to climb or stand on the stool. Supervise children during use.

WARNING! An incorrectly assembled stool can collapse, causing injury or damage. Tighten all screws securely.

Assembly Instructions

Follow these steps in order. Do not fully tighten screws until all legs are positioned.

  1. Prepare: Lay the seat upside down on a protected surface. Identify the three pre-drilled holes with threaded inserts.
  2. Attach First Leg: Take one leg. Align the hole in the top of the leg with one of the holes in the seat. Insert the provided wood screw through the leg and into the threaded insert. Hand-tighten with the Allen key, but do not fully tighten yet.
  3. Attach Remaining Legs: Repeat step 2 for the other two legs, attaching them to the remaining holes.
  4. Final Tightening: Once all three legs are attached and the stool can stand upright, turn it over. Place it on a flat surface and check that it does not wobble. If stable, fully tighten all three screws securely using the Allen key. Do not overtighten.
  5. Inspection: Ensure no screws are protruding and the stool is firm.

Tip: If the stool wobbles on a flat floor, slightly loosen the screws, re-position the stool to find its stable stance, and re-tighten.

Technical Specifications

Care & Maintenance

Proper care will maintain the appearance and longevity of your stool.

  1. Cleaning: Wipe clean with a damp cloth. Wipe dry immediately with a soft, clean cloth. Do not let liquids stand on the wood surface.
  2. Stains: For stubborn stains, use a mild soapy solution. Rinse with a damp cloth and dry immediately.
  3. Avoid: Do not use abrasive cleaners, scouring pads, or harsh chemicals. Do not place in direct sunlight for prolonged periods to prevent fading.
  4. Protection: Use felt pads under the legs if moving on delicate floors. Avoid dragging the stool.
  5. Periodic Check: Every few months, check that all screws are tight. Re-tighten if necessary using the Allen key.

CAUTION! Never immerse the stool in water. Acacia wood is natural and may develop a patina over time.

Warranty & Support

This product is covered by the IKEA commercial warranty. Refer to the IKEA warranty terms for your country.

IKEA Guarantee: Covers material and manufacturing defects for a specified period from the date of purchase under normal residential use.

Support: For missing parts, assembly questions, or warranty claims:

  1. Visit the IKEA store where you made your purchase with your receipt.
  2. Contact IKEA Customer Support online at www.ikea.com.
  3. Refer to the article number (102.979.58) when seeking assistance.

Troubleshooting

IssuePossible CauseSolution
Stool wobblesUneven floor; Legs not tightened evenly; Assembly errorCheck floor level. Loosen all screws, place stool on flat surface, let it find its natural stance, re-tighten evenly.
Screw won't tightenCross-threaded; Threads strippedDo not force. Remove screw and leg, realign, and start again carefully. If threads are damaged, contact IKEA for a replacement part.
Wood crack or splitManufacturing defect; Impact damageStop using. Contact IKEA Customer Support with your receipt for a possible replacement under warranty.
Stain or discolorationLiquid spill; Sun exposureClean as per Care instructions. Some natural darkening of wood over time is normal. Prevent future exposure to direct sunlight or liquids.
Missing partPackage errorContact IKEA Customer Support with your receipt and article number (102.979.58) to order a spare part.

Recycling: At end of life, disassemble and dispose of materials according to local recycling regulations. Wood and metal can often be recycled separately.

IKEA SKOGSTA 102.979.58 Stool instructions manual © - All Rights Reserved 2025