IKEA SKOGSGRÄNSEN 205.419.12 Mirror instructions manual

The IKEA SKOGSGRÄNSEN 205.419.12 is a wall-mounted mirror designed for indoor use. This manual provides essential information for safe unpacking, assembly, mounting, care, and troubleshooting. Please read all instructions carefully before beginning installation.

1. Package Contents & Tools Needed 2. Safety Instructions 3. Assembly Steps 4. Wall Mounting 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Package Contents & Tools Needed

Before starting, verify all parts are present and undamaged.

Part Description	Quantity	Image Ref.
Mirror panel	1	A
Wall mounting bracket (upper)	1	B
Wall mounting bracket (lower)	1	C
Screws and wall plugs	Set	D
Instruction manual	1	-

Tools you will need: Phillips screwdriver, pencil, level, tape measure, drill (for masonry walls), stud finder (recommended).

Safety Instructions

WARNING! Failure to follow these instructions can result in serious injury or damage.

Weight Hazard: This mirror is heavy. Use two people for handling and assembly.
Secure Mounting: Must be mounted to a solid wall capable of supporting its weight. Use appropriate wall anchors if not mounting into wall studs.
Glass Safety: The mirror is made of glass. Handle with care to avoid breakage. Do not use if the glass is cracked or chipped.
Child Safety: Keep children away from the assembly area. Ensure the mounted mirror is secure and out of reach if possible.
Electrical Safety: Ensure no electrical wires or pipes are behind the chosen mounting location before drilling.

Assembly Steps

The mirror comes largely pre-assembled. Follow these steps to prepare for wall mounting.

Unpack: Carefully remove all packaging materials. Lay the mirror face down on a soft, protected surface (e.g., a blanket or cardboard).
Attach Brackets: Locate the pre-drilled holes on the back of the mirror frame. Align the upper (B) and lower (C) mounting brackets with these holes.
Secure Brackets: Using the provided screws (D), fasten both brackets securely to the back of the mirror. Do not overtighten.
Check Alignment: Ensure both brackets are straight and firmly attached before proceeding to wall mounting.

CAUTION! Always handle the mirror with clean, dry hands. Avoid touching the reflective surface.

Wall Mounting

This is the most critical step. Accuracy is essential for a secure and level installation.

Choose Location: Select a solid wall. Use a stud finder to locate wooden studs. Mark their positions lightly with a pencil.
Mark Bracket Positions: Hold the mirror (with brackets attached) against the wall at the desired height. Use a level on top of the mirror to ensure it is perfectly horizontal. Lightly mark the wall through the screw holes in both the upper and lower brackets.
Drill Pilot Holes: At the marked points, drill pilot holes appropriate for your wall type (use wall plugs for drywall or masonry if not hitting a stud).
Mount Brackets to Wall: Align the brackets with the pilot holes. Secure the upper bracket to the wall first using the provided screws. Ensure it is tight. Then, secure the lower bracket.
Hang the Mirror: With the help of another person, carefully lift the mirror and hook the brackets on the back onto the corresponding brackets mounted on the wall. Listen for a secure click or feel for it settling into place.
Final Check: Gently test the stability of the mirror. Ensure it does not wobble or pull away from the wall.

Tip: For plaster or drywall, always use suitable wall anchors rated for the mirror's weight.

Specifications

Article Number: 205.419.12
Product Name: SKOGSGRÄNSEN
Type: Wall-mounted mirror
Dimensions (W x H): [Insert dimensions from product label, e.g., 80 cm x 120 cm]
Weight: [Insert weight from product label, e.g., 15 kg]
Frame Material: [e.g., Steel/Engineered wood]
Glass Type: Safety glass
Finish: [e.g., Black/Brown]
Intended Use: Indoor residential use only.

Care & Maintenance

Proper care will keep your mirror looking new.

Cleaning: Use a soft, lint-free cloth (microfiber is ideal).
Cleaning Solution: Lightly dampen the cloth with a mild glass cleaner or a mixture of vinegar and water. Never spray liquid directly onto the mirror surface.
Wiping: Gently wipe the glass in a circular motion. Dry immediately with a separate dry cloth to prevent streaks.
Avoid: Abrasive cleaners, scouring pads, ammonia-based products (on certain frames), or excessive moisture.
Frame Care: Dust the frame regularly with a dry cloth.

CAUTION! Do not use harsh chemicals or abrasive materials on the glass or frame.

Troubleshooting

Issue	Possible Cause	Solution
Mirror feels loose on wall	Brackets not securely fastened to wall; incorrect wall anchors used.	Remove mirror and check wall mounting. Ensure screws are tight and anchors are rated for the weight. Remount into studs if possible.
Mirror is not level	Wall brackets mounted unevenly.	Remove mirror. Use a level to re-mark and remount the wall brackets accurately.
Difficulty hanging mirror	Brackets on mirror and wall not aligned.	Have one person hold the mirror while another guides it onto the wall brackets. Ensure the mirror's brackets are fully seated on the wall brackets.
Streaks on glass after cleaning	Using too much cleaner or not drying properly.	Use less cleaning solution and always follow with a dry, clean cloth. Use a squeegee for large surfaces.
Frame appears damaged	Damage during assembly or transit.	Contact IKEA customer service for parts or replacement if damage occurred before or during assembly.

Warranty & Support

This IKEA product is covered by the IKEA commercial warranty. Refer to the IKEA warranty leaflet included in the packaging or available at IKEA stores for full terms and conditions.

For assembly assistance, missing parts, or product support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for warranty details.

Safety Notice: Retain this manual for future reference. Always follow local regulations for wall mounting and product disposal.