IKEA SKAFTET 295.055.56 Cord instructions manual

The IKEA SKAFTET 295.055.56 is a power cord designed for use with compatible IKEA furniture and lighting products. It features a standard plug configuration, appropriate wire gauge for safe operation, and is intended for indoor use with standard household voltage. Below are key sections for safety, features, installation, specifications, operation, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Connections 6. Connecting to Devices 7. Safe Operation 8. Care & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Power cord with molded plug, insulated conductors, and connector suitable for IKEA products.

Feature	Description
Plug Type	Standard household plug (Type A/B depending on region)
Cord Length	As specified for product compatibility
Wire Gauge	Appropriate for rated current and voltage
Insulation	PVC or equivalent for safety and durability
Connector End	Designed to match IKEA product socket
Color	Typically black or white
Rated Voltage/Current	As per regional standards (e.g., 120V AC, 10A)
Safety Certifications	UL, CE, or equivalent marks

Installation

Unpack and inspect cord for any damage before use.

Ensure the device is unplugged from power source.
Connect the cord connector to the matching socket on the IKEA product.
Route the cord safely to avoid pinching, sharp edges, or tripping hazards.
Plug the cord into a properly grounded electrical outlet.

WARNING! Do not use if cord is damaged. Ensure connections are secure and not forced.

First-Time Setup

Verify compatibility with your IKEA product before connection.

Check product manual: Confirm the SKAFTET 295.055.56 cord is listed as compatible.
Inspect outlets: Ensure electrical outlet is undamaged and provides correct voltage.
Connect securely: Push connector fully into product socket until it clicks or seats firmly.
Test operation: Power on the connected device to verify proper function.

CAUTION! Do not overload the cord or outlet. Use only with intended IKEA products.

Specifications

Model: SKAFTET 295.055.56
Type: Power Supply Cord
Length: As per variant (e.g., 1.8m / 6ft)
Conductors: 3 conductors (Live, Neutral, Ground)
Rated Voltage: 125V AC
Rated Current: 10A
Frequency: 60Hz
Temperature Range: Standard indoor operating temperatures
Compliance: Meets applicable safety standards

Controls and Connections

This cord has no user controls. Proper connection is essential.

Connections: Plug end (to wall outlet), Connector end (to IKEA product).

Important: Ensure the cord is not twisted or knotted during use. Do not use extension cords unless rated for the same or higher current.

Connecting to Devices

Designed for specific IKEA furniture (e.g., desks, lighting) with compatible power sockets.

Power off and unplug the IKEA product before connecting the cord.
Align the connector with the product socket; do not force.
Insert firmly until fully seated.
Plug the other end into a grounded wall outlet.

Tip: Route the cord along furniture legs or channels if provided to keep it tidy and safe.

Safe Operation

Follow electrical safety guidelines to prevent fire or shock hazard.

Inspect regularly: Check cord for cracks, fraying, or exposed wires.
Avoid damage: Do not run cord under carpets, rugs, or heavy furniture.
Keep dry: Never use with wet hands or in damp locations unless rated for it.
Disconnect properly: Pull by the plug, not the cord, when unplugging.
Child safety: Keep cord out of reach of young children.

WARNING! Do not attempt to repair a damaged cord. Replace it immediately.

Care & Maintenance

Unplug from outlet before any cleaning. Wipe with a dry cloth only.

CAUTION! Do not use liquids, solvents, or abrasive cleaners. Store coiled loosely in a dry place when not in use.

Regulatory Information

This product complies with relevant safety standards. May include FCC Part 15 compliance for unintentional radiators. Copyright and trademarks are property of Inter IKEA Systems B.V. For support, visit www.ikea.com or contact your local IKEA customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Device does not power on	Loose connection or no power	Check both ends of cord are fully inserted; test outlet with another device.
Cord feels warm	Overloading or poor connection	Ensure connected device is within cord's current rating; check for secure connections.
Visible damage to cord	Physical wear or misuse	Stop use immediately. Replace cord with a new SKAFTET 295.055.56 or equivalent.
Intermittent power	Faulty connection or damaged wire inside	Inspect cord along entire length; replace if any internal damage is suspected.
Spark when plugging in	Short circuit or device switch is on	Ensure device power switch is off before plugging in. If spark persists, have outlet checked by an electrician.

Replacement: Use only identical or manufacturer-approved replacement cords.

Service: Contact IKEA customer support or visit www.ikea.com for assistance.