IKEA SKAFTET 294.308.82 Lamp Base instructions manual
The IKEA SKAFTET 294.308.82 is a lamp base designed for use with compatible IKEA lampshades. It features a simple, modern design suitable for various room settings. Below are key sections for safety, assembly, installation, operation, care, and troubleshooting.
Parts Included
Before assembly, verify all parts are present.
| Part | Quantity | Description |
| Lamp base | 1 | Main body of the lamp |
| Socket assembly | 1 | Includes bulb holder and switch |
| Mounting hardware | 1 set | Screws and fasteners |
| Cord with plug | 1 | Power cord |
| Instruction manual | 1 | This document |
Safety Information
WARNING! Read all instructions before assembly and use.
- Use only with recommended lampshade and bulb type (max wattage specified).
- Ensure power is disconnected during assembly and installation.
- Do not place near heat sources or in damp locations unless rated for such use.
- Keep cord away from heated surfaces and sharp edges.
- This product is intended for indoor use only.
CAUTION! Risk of electric shock. Assembly by an adult is recommended.
Assembly Instructions
Follow these steps to assemble your lamp base.
- Place the lamp base on a stable, flat surface.
- Insert the socket assembly into the top of the base, aligning the grooves.
- Secure the socket assembly using the provided screw(s). Do not overtighten.
- Thread the power cord through the designated channel in the base.
- Attach the cord to the socket terminals according to the wiring diagram (if applicable).
- Ensure all connections are tight and no bare wires are exposed.
Tip: Refer to the included pictorial guide for visual reference.
Installation
Installing your lamp on a table or surface.
- Choose a stable, level surface away from edges.
- Place the assembled lamp base on the surface.
- Plug the power cord into a standard 120V AC wall outlet.
- Screw in a compatible bulb (see Specifications for max wattage).
- Attach the compatible IKEA lampshade by following its specific instructions.
WARNING! Do not use bulbs exceeding the maximum wattage to prevent overheating.
Specifications
- Product Name: SKAFTET
- Article Number: 294.308.82
- Material: Steel/Other materials as specified.
- Color: As per packaging.
- Max Bulb Wattage: [e.g., 60W] or equivalent LED.
- Bulb Type: E26/E27 base (standard).
- Cord Length: Approximately 6 feet (1.8 meters).
- Intended Use: Indoor, table or floor lamp base.
- Compliance: Meets applicable safety standards.
Operation
Operating your lamp is simple.
- Ensure the lamp is plugged in and the bulb is installed.
- Use the switch on the socket or cord (model dependent) to turn the lamp ON/OFF.
- For models with a dimmer, rotate or slide the switch to adjust brightness.
- To change the bulb, ensure the lamp is off and unplugged. Allow bulb to cool if recently on.
Note: The lamp base is designed for use with a shade to diffuse light.
Care & Maintenance
Proper care ensures longevity.
- Unplug the lamp before any cleaning or maintenance.
- Wipe the base with a soft, dry cloth. For stubborn marks, use a slightly damp cloth.
- Do not use abrasive cleaners, solvents, or chemicals.
- Check the cord periodically for damage. Do not use if cord is frayed or damaged.
- Dust the lampshade regularly according to its care instructions.
CAUTION! Never immerse the lamp base, socket, or cord in water.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
| Lamp does not turn on | Not plugged in / Bulb burnt out / Faulty switch | Ensure plug is secure in outlet. Replace bulb. Check switch operation. |
| Lamp flickers | Loose bulb / Faulty connection | Turn off, unplug, and tighten bulb. Check socket and cord connections. |
| Lamp gets hot | Bulb wattage too high | Use a bulb with wattage at or below the maximum specified. |
| Unstable on surface | Uneven surface / Base not level | Place on a flat, stable surface. Ensure all feet are touching. |
| Crackling sound or smell | Electrical fault | Immediately unplug and discontinue use. Contact support. |
Warranty & Support
IKEA products are covered by warranty. Refer to the IKEA guarantee for terms.
For assistance, assembly help, spare parts, or more information:
- Visit: www.ikea.com
- Contact your local IKEA store.
- Refer to the product page online using the article number 294.308.82.
Recycling: Dispose of the product and its components according to local regulations for electrical equipment.
IKEA SKAFTET 294.308.82 Lamp Base instructions manual © - All Rights Reserved 2025