IKEA SJÄLLAND 492.676.58 Bench instructions manual

The IKEA SJÄLLAND 492.676.58 is a sturdy wooden bench designed for indoor use, featuring a classic slatted seat, solid wood construction, and a natural finish. It requires assembly and comes with all necessary hardware and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Troubleshooting 7. Warranty & Support

Parts & Hardware Included

Before assembly, check that you have all parts listed below.

Part Name	Quantity	Description/Image Ref.
Bench Seat (Slatted)	1	Main seat component with pre-drilled holes
Bench Legs	4	Solid wood legs
Side Rails	2	Connects legs under seat
Wooden Dowels	8	For joining parts
Cam Lock Nuts	4	For securing connections
Allen Key	1	Tool provided for assembly
Screws	16	Various sizes for reinforcement
Instruction Manual	1	This document

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Work Area: Assemble on a soft, clean surface to avoid scratches.
Tool Use: Use only the provided Allen key. Do not overtighten screws.
Lifting: Bench is heavy; use two people to move it.
Stability: Ensure all parts are securely fastened before use.
Weight Limit: Do not exceed the maximum load capacity (see Specifications).

WARNING! Improper assembly can lead to instability and injury. Follow steps precisely.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Follow steps in order.

Step 1: Lay the bench seat upside down on a protected surface.
Step 2: Insert wooden dowels into the pre-drilled holes on the underside of the seat.
Step 3: Attach the two side rails to the seat using the dowels and cam lock nuts. Tighten with the Allen key.
Step 4: Attach the four legs to the side rails using the provided screws. Ensure legs are perpendicular to the seat.
Step 5: Flip the bench upright carefully. Check all connections are tight and the bench sits level on the floor.
Step 6: Wipe clean with a dry cloth.

Tip: Do not fully tighten any screw until all parts are aligned.

Specifications

Product Name: SJÄLLAND Bench
Article Number: 492.676.58
Dimensions (L x W x H): 120 cm x 40 cm x 45 cm
Material: Solid wood (Pine), Clear lacquer finish
Weight: 15 kg
Max Load Capacity: 200 kg (evenly distributed)
Recommended Use: Indoor, dry environments only
Packaging: Flat-pack, recyclable cardboard

Care & Maintenance

To maintain appearance and longevity:

Cleaning: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
Protection: Avoid prolonged exposure to direct sunlight, heat sources, or high humidity.
Inspection: Periodically check and tighten screws if necessary.
Repairs: Minor scratches can be touched up with matching wood stain (not included).

CAUTION! Never soak or submerge the bench in water.

Troubleshooting

Issue	Possible Cause	Solution
Bench wobbles	Uneven floor; loose connections	Check floor level; tighten all screws and cam locks.
Parts don't fit	Wrong orientation	Verify part labels and orientation in diagrams.
Missing hardware	Packaging error	Contact IKEA customer service for replacement parts.
Wood cracks during assembly	Overtightening screws	Do not force screws; assemble on soft surface.
Finish looks damaged	Scratches from assembly	Use protective padding during assembly; touch up as needed.

Warranty & Support

This product is covered by IKEA's limited warranty. Refer to the IKEA warranty leaflet included in packaging for full terms.

For assistance:

Visit the IKEA website: www.ikea.com
Contact IKEA customer support at 1-888-888-4532
Bring your receipt and article number (492.676.58) for service inquiries.

Recycling: Dispose of packaging materials according to local recycling regulations.