IKEA SINNERLIG 905.012.10 Table Lamp instructions manual

The IKEA SINNERLIG 905.012.10 is a modern table lamp featuring a bamboo shade and a black metal base, designed for ambient lighting. It uses a max 13W E26/E27 LED bulb (not included), operates on 120V AC, 60Hz, and includes an inline on/off switch. Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. First-Time Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Placement & Usage 8. Safety Information 9. Care & Cleaning 10. Warranty & Support 11. Troubleshooting

Features at a Glance

Key components: Bamboo shade, Black metal base and stem, Inline on/off switch, E26/E27 bulb socket.

Feature	Description
Shade Material	Natural bamboo
Base Material	Powder-coated black metal
Bulb Socket	Standard E26/E27 (medium base)
Max Wattage	13W LED recommended
Power Supply	120V AC, 60Hz
Switch Type	Inline cord switch
Cord Length	Approx. 6 feet (1.8m)
Dimensions (HxW)	Approx. 15" H x 9" W (38cm x 23cm)
Weight	Approx. 3.3 lbs (1.5 kg)
Design	Modern, ambient lighting

Assembly Instructions

Unpack all parts and inspect for damage. Place on a clean, flat surface.

Attach base to stem: Screw the metal stem into the base firmly by hand.
Install bulb socket: Ensure the socket is securely attached to the top of the stem.
Attach bamboo shade: Align the shade with the socket bracket and secure it according to the provided hardware (usually a finial or clip).
Route the cord: Ensure the cord runs neatly along the stem and out from the base.
Insert bulb: Screw in an appropriate LED bulb (max 13W, E26/E27 base).

WARNING! Ensure the lamp is unplugged during assembly. Do not overtighten parts.

First-Time Setup

After assembly, prepare the lamp for use.

Place lamp: Position on a stable, level surface away from edges.
Plug in: Connect the power cord to a standard 120V outlet.
Test operation: Use the inline switch to turn the lamp on and off.
Adjust placement: Ensure the lamp is not in contact with curtains, bedding, or other flammable materials.

CAUTION! Use only recommended bulb type and wattage to prevent overheating.

Specifications

Model: SINNERLIG 905.012.10
Type: Table Lamp
Materials: Bamboo shade, Black metal base and stem
Bulb: 1 x max 13W LED, E26/E27 base (not included)
Voltage: 120V AC, 60Hz
Cord: 6 ft (1.8m) with inline switch
Dimensions: Approx. 15" H x 9" W (38cm x 23cm)
Weight: 3.3 lbs (1.5 kg)
Ambient Light Output: Suitable for task or mood lighting
Certifications: UL Listed (or equivalent safety standard)

Controls and Operation

Operation is simple via the inline switch on the power cord.

Switch: Flip the inline switch to ON (I) for light, OFF (O) to turn off.

Note: There are no dimming or color temperature controls built into the lamp. Use a compatible dimmable LED bulb and external dimmer switch if dimming is desired.

Tip: For best performance and energy savings, use an ENERGY STAR® qualified LED bulb.

Bulb Replacement

Replace the bulb when it burns out or for a different light effect.

Turn off and unplug: Always disconnect power before replacing the bulb.
Let bulb cool: Allow the old bulb to cool completely if it was recently on.
Remove old bulb: Unscrew the old bulb counterclockwise.
Insert new bulb: Screw in a new max 13W E26/E27 LED bulb clockwise until snug.
Restore power: Plug in the lamp and test with the switch.

WARNING! Do not exceed the maximum wattage. Using a higher wattage bulb can cause overheating and fire hazard.

Placement & Usage

Ideal for bedside tables, desks, shelves, or living room side tables.

Ensure the surface is stable and level.
Keep away from water sources (sinks, baths) to avoid electric shock.
Do not place where the cord can be tripped over.
Allow space around the shade for heat dissipation.

Tip: Pair with a warm white LED bulb (2700K-3000K) for a cozy ambient light.

Safety Information

Read all safety instructions before use.

Use only with 120V AC outlet.
This lamp is for indoor use only.
Do not use in damp or wet locations.
Do not cover the lamp or shade with any material.
Keep out of reach of young children.
Inspect cord periodically for damage. Do not use if cord is frayed.
Disconnect power before cleaning or bulb replacement.

CAUTION! Risk of fire or electric shock if misused.

Care & Cleaning

Unplug the lamp before cleaning.

Bamboo Shade: Dust with a soft, dry cloth. Do not use water, liquid cleaners, or abrasive materials.
Metal Base/Stem: Wipe with a slightly damp cloth, then dry immediately.
Cord and Switch: Wipe with a dry cloth.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty document included with purchase or available at IKEA stores.

Support: For missing parts, assembly help, or product questions:

Visit: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532
Reference Model: SINNERLIG 905.012.10

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Bad bulb / Loose connection	Check outlet; try a different bulb; ensure bulb is screwed in tightly; check inline switch.
Flickering light	Loose bulb / Incompatible bulb / Faulty bulb	Reseat bulb; ensure it's a standard E26/E27 LED; replace bulb.
Lamp gets hot	Bulb wattage too high / Poor ventilation	Use only max 13W LED bulb; ensure shade is not covered; allow space around lamp.
Shade is loose	Finial or clip not tight	Gently tighten the finial or clip securing the shade. Do not overtighten.
Unstable on surface	Uneven surface / Base not fully assembled	Place on level surface; ensure base is firmly attached to stem.

Disposal: Dispose of according to local regulations for electronic waste. Do not dispose of with household trash.

Service: This product contains no user-serviceable parts inside. Do not attempt to disassemble beyond bulb replacement.