IKEA SINNERLIG 605.158.69 Lighting instructions manual

The IKEA SINNERLIG 605.158.69 is a pendant lamp designed by Ilse Crawford, featuring a hand-blown glass shade with a smoked finish and a black textile cord. It provides a soft, diffused light ideal for creating a warm atmosphere. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Bulb Replacement 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Hand-blown smoked glass shade, black textile cord, ceiling canopy, wire suspension set, E27 bulb socket.

Feature	Description
Glass Shade	Hand-blown, smoked finish for soft, diffused light
Textile Cord	Black, adjustable length (max. 300 cm)
Ceiling Canopy	For secure mounting to ceiling
Bulb Socket	E27 base, max 15W LED or 13W CFL recommended
Suspension Set	Includes wires and hardware for hanging
Designer	Ilse Crawford for IKEA
Light Output	Warm white, ambient lighting
Dimmable	Compatible with leading-edge dimmers (check bulb compatibility)
IP Rating	For indoor use only
Assembly	Required; tools not included

Installation

Unpack and inspect all parts. Ensure you have a stable ladder and necessary tools.

Turn off power: Switch off electricity at the circuit breaker for the installation area.
Assemble canopy: Attach wires to the ceiling canopy following wiring diagram.
Adjust cord length: Cut textile cord to desired length (leave extra for connections).
Mount canopy: Secure ceiling canopy to electrical box using provided screws.
Attach shade: Connect glass shade to cord and socket assembly.
Install bulb: Insert compatible LED or CFL bulb (max 15W LED/13W CFL).

WARNING! Installation should be performed by a qualified electrician if you are unsure. Ensure all connections are secure and insulated.

First-Time Setup

After installation, restore power and test the lamp.

Power on: Turn electricity back on at the circuit breaker.
Test switch: Operate wall switch to ensure lamp turns on/off.
Check dimming: If using a dimmer, test full range of dimming function.
Adjust height: If needed, re-adjust cord length before finalizing installation.

CAUTION! Do not touch bulb when lit. Allow bulb to cool before handling.

Specifications

Model: SINNERLIG 605.158.69
Designer: Ilse Crawford
Material: Glass shade, steel/plastic fittings, textile cord
Cord Length: Adjustable up to 300 cm
Bulb: 1 x E27 base, max 15W LED or 13W CFL recommended
Dimmable: Yes, with compatible dimmer and bulb
Light Color: Warm white (2700K)
Voltage: 120V AC, 60Hz (for North America)
Weight: 2.5 kg (including shade)
Dimensions: Shade: Ø 35 cm, H 25 cm

Controls and Settings

Primary control is via wall switch. No remote or built-in controls.

Wall Switch: Standard ON/OFF switch. Dimmer Switch: Compatible with leading-edge dimmers for adjustable brightness (ensure bulb is dimmable).

Settings: No user-adjustable settings beyond dimmer control. Ensure proper bulb wattage and type for optimal performance and safety.

Connecting to Power

Connect to standard household electrical wiring.

Ensure power is OFF at circuit breaker.
Connect wires: Follow color coding (black to hot, white to neutral, green/bare to ground).
Secure connections: Use wire nuts and ensure no bare wire is exposed.
Mount canopy: Tuck wires into electrical box and secure canopy.

Tip: Use a voltage tester to confirm power is off before touching wires.

Bulb Replacement

Use only recommended bulbs to prevent overheating.

Turn off power: Switch off at wall and allow bulb to cool.
Remove shade: Gently unscrew or unclip glass shade (if necessary).
Replace bulb: Unscrew old bulb, screw in new E27 bulb (max 15W LED/13W CFL).
Reattach shade: Secure glass shade back in place.
Restore power: Turn on switch to test new bulb.

WARNING! Do not exceed maximum wattage. Do not use halogen bulbs as they may overheat.

Safety Features

Overheat protection: Built into design with proper bulb wattage. Electrical insulation: All live parts enclosed in canopy. Grounding: Includes ground wire for safety.

Care & Cleaning

Turn off and cool before cleaning. Use dry, soft cloth for glass shade. For stubborn marks, use damp cloth with mild soap, then dry immediately.

CAUTION! Do not use abrasive cleaners or chemicals. Do not immerse in water.

Regulatory Information

Complies with UL Standard 1598. FCC Part 15: Class B digital device (if applicable with dimmable LED). Copyright © IKEA. For support, visit www.ikea.com or contact IKEA customer service at 1-888-888-4532.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Power/bulb	Check circuit breaker; ensure switch is on; replace bulb.
Flickering light	Loose connection/bulb	Check wiring connections; ensure bulb is properly screwed in; try different bulb.
Dimmer not working	Bulb compatibility	Ensure bulb is dimmable; check dimmer switch compatibility.
Overheating	Bulb wattage too high	Replace with recommended max 15W LED or 13W CFL bulb.
Shade loose	Assembly	Turn off power, check and tighten attachment points.

Reset: Turn power off and on at breaker if electrical issue suspected.

Service: 1-888-888-4532; www.ikea.com