IKEA SIMRISHAMN 804.378.04 Table Lamp instructions manual

The IKEA SIMRISHAMN 804.378.04 is a stylish table lamp designed for ambient lighting. It features a fabric shade, a sturdy base, an E26/E27 socket compatible with LED bulbs (max 13W), an inline switch on the cord, and a 6-foot power cord. Below are key sections for safety, features, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Safety Information 4. Assembly Instructions 5. Installation & Setup 6. Operation 7. Care & Maintenance 8. Specifications 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Fabric shade, Metal/plastic base, E26/E27 bulb socket, Inline cord switch, 6-foot power cord.

Feature	Description
Shade Material	Fabric, provides soft diffused light
Base Material	Metal and plastic composite, stable design
Bulb Socket	E26/E27 standard, compatible with LED/CFL/incandescent
Max Wattage	13W LED recommended for optimal performance
Cord Length	6 feet (1.8 meters) with inline switch
Switch Type	Inline rocker switch on power cord
Dimensions	Approx. 12" height x 8" width (shade)
Weight	2.2 lbs (1 kg) assembled
Color Options	Available in multiple fabric shade colors
Design Style	Modern Scandinavian, suitable for bedside/desk

Package Contents

Unpack and verify all parts are included before assembly.

Fabric lamp shade (1 piece)
Lamp base (1 piece)
Bulb socket with pre-attached cord (1 set)
Hardware pack: screws (2 pieces)
Instruction manual (this document)

NOTE: Light bulb not included. Use LED bulb max 13W for best results.

Safety Information

Read all safety instructions before assembly and use.

Use only with E26/E27 base bulbs. Do not exceed 13W LED or equivalent.
Unplug lamp before assembly, cleaning, or bulb replacement.
Place on stable, level surface away from edges.
Keep away from water, moisture, and heat sources.
Do not use if cord or plug is damaged. Contact IKEA support.
Not for outdoor use. Indoor use only.
Keep out of reach of children and pets.

WARNING! Risk of electric shock if used improperly. Ensure proper bulb wattage.

Assembly Instructions

Estimated assembly time: 10 minutes. Tools required: Phillips screwdriver (optional).

Place base on flat surface with opening facing up.
Insert bulb socket assembly into base opening, guiding cord through bottom.
Secure socket to base using provided screws (hand-tighten, do not over-tighten).
Gently place fabric shade over socket, aligning with grooves on socket rim.
Rotate shade clockwise until it clicks into place (approx. 1/4 turn).
Ensure shade is level and secure.

CAUTION! Do not force parts. If resistance is felt, check alignment.

Installation & Setup

After assembly, install bulb and position lamp.

Screw in compatible bulb (max 13W LED recommended). Do not overtighten.
Place lamp on stable surface (nightstand, desk, side table).
Plug power cord into standard 120V AC outlet.
Route cord safely to avoid tripping hazards.
Use inline switch on cord to turn lamp ON/OFF.

Tip: For best light distribution, position shade opening upward.

Operation

Simple operation via inline cord switch.

ON: Press top side of inline rocker switch.
OFF: Press bottom side of inline rocker switch.
Bulb replacement: Unplug lamp, let bulb cool, unscrew old bulb, screw in new bulb (max 13W).
Adjust positioning: Lamp is stationary; adjust by moving entire unit.

NOTE: Lamp may warm slightly during extended use. This is normal.

Care & Maintenance

Unplug lamp before any cleaning.

Fabric shade: Use soft brush or vacuum with brush attachment to remove dust.
Base: Wipe with dry or slightly damp cloth. Do not use abrasive cleaners.
Cord: Wipe with dry cloth. Do not immerse in water.
Storage: Store in dry place, avoid crushing shade.

CAUTION! Do not machine wash shade. Do not use chemicals or solvents.

Specifications

Model: SIMRISHAMN 804.378.04
Type: Table Lamp
Socket: E26/E27 (standard)
Max Wattage: 13W LED recommended
Voltage: 120V AC, 60Hz
Cord Length: 6 ft (1.8 m)
Dimensions (HxW): 12" x 8" (30 cm x 20 cm) approx.
Weight: 2.2 lbs (1 kg)
Materials: Fabric shade, Metal/plastic base
Color: As per packaging (e.g., White, Black, Gray)

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; switch off	Replace bulb; ensure plug is in outlet; toggle switch.
Flickering light	Loose bulb; incompatible bulb	Tighten bulb; use recommended 13W LED bulb.
Shade loose or crooked	Not fully seated	Turn shade clockwise until it clicks securely.
Overheating	Bulb wattage too high	Use max 13W LED bulb; ensure ventilation.
Cord/switch damage	Physical wear	Unplug immediately. Contact IKEA for replacement.

Reset: Unplug for 1 minute, then plug back in.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

For assistance: Visit www.ikea.com or contact IKEA customer support at 1-888-888-4532. Have model number (804.378.04) ready.

Recycling: Dispose of according to local electronic waste regulations. Bulbs may require separate recycling.