IKEA SIMRISHAMN 804.377.76 Floor Lamp instructions manual

The IKEA SIMRISHAMN 804.377.76 is a modern floor lamp featuring a white metal shade, adjustable height, and an integrated LED light source. It is designed for indoor residential use, providing ambient lighting with energy-efficient performance. Below are key sections for safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Placement 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Safety Information 8. Care & Cleaning 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: White metal shade, adjustable stand, integrated LED module, on/off foot switch, stable base.

Feature	Description
Shade Material	White painted metal
Light Source	Integrated, non-replaceable LED module
Adjustable Height	Adjustable stand from 140cm to 160cm
Switch Type	Foot switch for easy on/off control
Power Input	Plug-in to standard wall outlet
Base	Weighted circular base for stability
Color Temperature	2700K (warm white)
Luminous Flux	800 lumens
Energy Class	A+
Intended Use	Indoor residential areas

Assembly Instructions

Unpack all parts and check contents against parts list. Ensure all components are present and undamaged.

Attach the base: Insert the lower pole section into the weighted base and secure with provided screw.
Connect pole sections: Extend the adjustable pole to desired height and tighten the locking mechanism.
Attach the shade: Place the metal shade over the top of the pole and secure with the included fastening ring.
Route the cord: Ensure the power cord runs neatly along the pole and exits near the base.
Final check: Verify all connections are tight and the lamp stands upright without wobbling.

WARNING! Assemble on a soft surface to avoid scratches. Do not overtighten screws.

Installation & Placement

Choose a stable, level surface away from heat sources and high-traffic areas.

Position the lamp: Place on a flat, stable floor surface.
Adjust height: Loosen the height adjustment knob, set desired height, and retighten.
Connect to power: Plug the cord into a standard 120V AC wall outlet.
Test operation: Press the foot switch to turn the lamp on and off.

CAUTION! Keep away from curtains, bedding, or other flammable materials. Do not place in damp locations.

Specifications

Model: SIMRISHAMN 804.377.76
Type: Floor Lamp
Height: Adjustable 140-160 cm
Base Diameter: 30 cm
Shade Diameter: 35 cm
Weight: 3.5 kg
Light Source: Integrated LED, non-replaceable
Power Consumption: 10W
Luminous Flux: 800 lm
Color Temperature: 2700K (Warm White)
Input Voltage: 120V AC, 60Hz
Energy Rating: A+
Expected Lifetime: 25,000 hours

Controls and Operation

The lamp is operated via a foot switch located at the base of the pole.

Operation: Press once to turn on, press again to turn off. No dimming functionality is included.

Height Adjustment: Loosen the locking knob on the pole, adjust to desired height, and retighten securely.

Note: The integrated LED module is designed for continuous operation and does not require warm-up time.

Bulb Replacement

This model features an integrated, non-replaceable LED module. If the light source fails, the entire lamp must be replaced.

Unplug the lamp from the power outlet.
Do not attempt to open the shade or access the LED module.
Contact IKEA customer service for warranty or replacement options.

WARNING! Never attempt to replace or repair the integrated LED module. This will void the warranty and may cause electric shock.

Safety Information

Important safety instructions to prevent fire, electric shock, or injury.

Use only with 120V AC, 60Hz power supply.
Do not use outdoors or in damp/wet locations.
Keep away from children and pets to prevent tipping.
Do not cover the lamp or shade with any material.
Unplug before cleaning or when not in use for extended periods.
Do not use with dimmer switches or timers unless specified.
If the cord is damaged, discontinue use immediately.

CAUTION! The shade may become warm during extended use. Avoid touching during operation.

Care & Cleaning

Regular cleaning maintains appearance and performance.

Unplug the lamp and allow to cool completely.
Wipe the metal shade and pole with a soft, dry cloth.
For stubborn marks, use a slightly damp cloth with mild soap, then dry immediately.
Never use abrasive cleaners, solvents, or chemicals.
Do not immerse any part of the lamp in water.

CAUTION! Never spray cleaning agents directly onto the lamp. Moisture can damage electrical components.

Warranty & Support

IKEA provides a limited warranty for this product. Refer to the IKEA warranty card included with purchase for full terms.

Warranty Coverage: Typically covers manufacturing defects for a specified period from date of purchase.

Support: For assistance with assembly, missing parts, or product issues:

Visit: www.ikea.com
Contact IKEA customer service: 1-888-888-4532
Visit your local IKEA store with proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in / faulty outlet	Ensure plug is fully inserted; try another outlet; check circuit breaker.
Lamp flickers	Loose connection	Check plug connection; ensure foot switch is fully engaged.
Lamp is unstable	Uneven surface / loose assembly	Place on level floor; tighten all screws and locking mechanisms.
Light output is dim	End of LED life	Integrated LED may be near end of lifespan; consider replacement.
Foot switch is stiff	Debris or mechanical issue	Unplug and clean around switch; if persistent, contact support.

Disposal: Dispose of according to local electronic waste regulations. Do not dispose with household trash.

Service: For issues not resolved above, contact IKEA customer support.