IKEA SIMRISHAMN 704.376.87 Table Lamp instructions manual

The IKEA SIMRISHAMN 704.376.87 is a stylish table lamp designed for ambient lighting. It features a fabric shade, a stable base, an E26/E27 bulb socket (max 13W LED or equivalent), an inline switch on the power cord, and a plug suitable for 120V AC, 60Hz. This manual covers safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Assembly Instructions 3. Installation & Setup 4. Specifications 5. Controls and Operation 6. Bulb Replacement 7. Care & Cleaning 8. Safety Information 9. Warranty & Support 10. Troubleshooting

Features at a Glance

Key components: Fabric shade, Lamp base, Bulb socket (E26/E27), Power cord with inline switch, Plug.

Feature	Description
Shade Material	Fabric, provides soft diffused light
Base	Stable weighted base to prevent tipping
Bulb Socket	Standard E26/E27, max 13W LED or equivalent
Power Cord	With integrated inline ON/OFF switch
Plug	Standard 2-prong plug for 120V AC
Dimensions (approx.)	Height: 15.7" (40 cm), Base Diameter: 5.9" (15 cm)

Assembly Instructions

Unpack all parts and check contents against the parts list.

Attach the base: If separate, screw the base plate to the main stem securely.
Install the bulb socket: Ensure it is fixed firmly in the top of the lamp stem.
Attach the shade: Place the fabric shade over the bulb socket frame and secure it according to the provided mechanism (e.g., screw-on ring or clips).
Route the cord: Ensure the power cord runs neatly from the base.

WARNING! Do not plug in the lamp during assembly. Ensure all parts are firmly connected.

Installation & Setup

Place the lamp on a stable, flat, dry surface away from edges.

Choose location: Select a stable table or shelf near a power outlet.
Insert bulb: Use an LED or CFL bulb, max 13W (equivalent to 60W incandescent). Screw in firmly but do not overtighten.
Plug in: Connect the plug to a standard 120V AC wall outlet.
Test operation: Use the inline switch on the cord to turn the lamp ON/OFF.

CAUTION! Keep away from water, heat sources, and flammable materials.

Specifications

Product Name: SIMRISHAMN
Article Number: 704.376.87
Bulb Socket: E26/E27
Max Wattage: 13W LED or equivalent (do not exceed)
Power Supply: 120V AC, 60Hz
Cord Length: Approximately 6 feet (1.8 m)
Materials: Base: Steel/plastic; Shade: Polyester fabric
Weight: Approx. 2.2 lbs (1 kg)

Controls and Operation

The lamp is operated solely via the inline switch on the power cord.

Operation: Press the switch to turn the lamp ON. Press again to turn OFF.

Tip: For energy savings and bulb longevity, turn off when not in use.

Bulb Replacement

Always turn OFF and unplug the lamp before replacing the bulb.

Allow bulb to cool completely if it was recently on.
Gently unscrew the old bulb counterclockwise.
Screw in a new E26/E27 bulb of 13W LED max (or equivalent CFL). Do not exceed recommended wattage.
Plug in the lamp and test with the switch.

WARNING! Use only recommended bulb types. High-wattage bulbs can cause overheating and fire risk.

Care & Cleaning

Unplug the lamp and allow it to cool before cleaning.

Shade: Use a soft brush or vacuum with a soft brush attachment to remove dust. Do not wash.
Base and stem: Wipe with a soft, dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately.
Cord: Wipe with a dry cloth. Do not use chemicals or abrasives.

CAUTION! Never immerse the lamp, cord, or plug in water or other liquids.

Safety Information

This lamp is for indoor use only.
Use only with 120V AC, 60Hz power.
Do not use with dimmer switches unless specified compatible.
Keep out of reach of children and pets.
Do not cover the lamp or shade while in operation, as it may overheat.
Inspect the cord periodically for damage. Do not use if cord or plug is damaged.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty document included with purchase or available at IKEA stores.

For product support, assembly questions, or spare parts:
Visit: www.ikea.com
Contact IKEA Customer Service: 1-888-888-4532

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power / Bad bulb / Loose connection	Check outlet; replace bulb; ensure plug is fully inserted; check inline switch.
Lamp flickers	Loose bulb / Faulty bulb	Turn off, unplug, and tighten bulb. If problem persists, try a new bulb.
Lamp gets hot	Bulb wattage too high / Ventilation blocked	Use only recommended max 13W LED bulb. Ensure shade is not covered.
Unusual smell	New bulb / Overheating / Electrical fault	New bulbs may have a slight odor initially. If strong or persistent, unplug immediately and contact support.
Shade is loose	Not secured properly during assembly	Turn off and unplug. Check and tighten the shade securing mechanism (ring or clips).

Disposal: Dispose of according to local regulations for electronic waste. The bulb may contain materials requiring special disposal.