IKEA SIMRISHAMN 504.518.77 Lighting instructions manual

The IKEA SIMRISHAMN 504.518.77 is a ceiling/wall lamp designed for indoor use. It features a metal shade, E27 bulb socket (max 60W), and requires assembly. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Bulb Replacement 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Metal shade, Mounting bracket, E27 bulb socket, Power cord (if applicable), Mounting hardware.

Feature	Description
Shade Material	Metal, painted finish
Bulb Socket	E27 (standard screw base)
Max Wattage	60W incandescent or equivalent LED
Mounting Type	Ceiling or wall mount
Power Input	120V AC, 60Hz (region dependent)
Included Parts	Mounting bracket, screws, wall plugs, assembly instructions
Dimmer Compatibility	Check bulb type; not all LEDs are dimmable
Assembly Required	Yes, tools needed: screwdriver, ladder
IP Rating	IP20 - for indoor dry locations only
Design	Adjustable shade angle on some models

Installation

Unpack and inspect all parts. Ensure power is OFF at circuit breaker.

Choose location: Ceiling or wall, away from heat sources and moisture.
Mount bracket: Use included screws and wall plugs; ensure secure to stud or solid surface.
Assemble lamp: Attach shade to bracket as per diagram.
Electrical connection: Connect wires (black to black, white to white, green/bare to ground). If unsure, consult electrician.
Secure lamp: Attach to bracket and tighten.

WARNING! Risk of electric shock. Turn off power before installation. If not confident, hire a qualified electrician.

First-Time Setup

After installation, restore power and test.

Install bulb: Use E27 bulb, max 60W. Ensure bulb is securely screwed in.
Turn on power: Switch on at circuit breaker and wall switch.
Test operation: Lamp should light. If not, see Troubleshooting.
Adjust shade: If adjustable, point light as desired.

CAUTION! Do not exceed max wattage. Use ladder safely during installation.

Specifications

Product Name: SIMRISHAMN
Article Number: 504.518.77
Bulb Socket: 1 x E27
Max Wattage: 60W
Voltage: 120V AC, 60Hz (or local standard)
Dimensions: Varies by model; see packaging.
Weight: Approx. 1.5 kg (assembled)
Material: Steel, plastic, other materials as specified.
Color: As per model (e.g., black, white, silver)
Lifetime: LED bulbs recommended for longer life.

Controls and Settings

This lamp is controlled by the wall switch it is connected to. No built-in controls.

Optional Dimmer: If using a dimmable bulb, an external dimmer switch can be installed on the wall circuit by an electrician.

Shade Adjustment: Some models allow manual adjustment of the shade direction. Loosen knob, reposition, retighten.

Connecting to Power

Must be connected to standard household wiring.

Ensure power is OFF at breaker.
Connect lamp wires to house wires: Black (live) to black, white (neutral) to white, green/yellow (ground) to ground.
Use wire nuts and electrical tape to secure connections.
Tuck wires neatly into junction box before attaching lamp.

Tip: Always follow local electrical codes. Use a voltage tester to confirm power is off.

Bulb Replacement

Turn off power and let bulb cool before replacement.

Switch off power at wall switch and/or breaker.
Allow old bulb to cool if it was recently on.
Unscrew old bulb counterclockwise.
Screw in new E27 bulb clockwise until snug. Do not overtighten.
Restore power and test.

WARNING! Use only bulbs within specified wattage. LED bulbs are recommended for energy efficiency and lower heat.

Safety Features

IP20 Rating: Protects against solid objects >12.5mm, no protection against water. For indoor use only. Overheating Protection: Ensure adequate ventilation; do not cover lamp or place near flammable materials.

Care & Cleaning

Turn off and cool before cleaning. Use soft, dry cloth. For stubborn dirt, use damp cloth with mild soap. Dry immediately.

CAUTION! Do not use abrasive cleaners, solvents, or spray directly on lamp. Never immerse in water.

Regulatory Information

Complies with applicable safety standards (e.g., UL, ETL in US; CE in EU). This product is designed for use in dry, indoor locations only. Dispose of packaging and old bulbs according to local regulations. For IKEA product support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not light	Power off / Bulb faulty	Check circuit breaker and wall switch. Replace bulb.
Flickering light	Loose bulb / Loose connection / Incompatible dimmer	Tighten bulb. Check wiring connections. Ensure bulb is dimmable if using dimmer.
Overheating	Bulb wattage too high / Poor ventilation	Use bulb of correct max wattage. Ensure lamp is not covered or in enclosed space.
Lamp loose on wall/ceiling	Mounting not secure	Turn off power. Tighten mounting screws into stud or use appropriate anchors.
Buzzing sound	Transformer (if LED) / Dimmer incompatibility	Try a different bulb. Use a dimmer designed for LED bulbs.

Disposal: Dispose of lamp and bulbs according to local electronic waste regulations.

Service: For missing parts or defects, contact IKEA customer service with article number (504.518.77).