IKEA SEKTION 304.508.45 Cabinet Frame instructions manual

The IKEA SEKTION 304.508.45 is a versatile cabinet frame designed for kitchen and storage use, part of the SEKTION modular system. It features a sturdy construction, adjustable shelves, and compatibility with various IKEA doors, drawers, and interior organizers. Below are key sections for safety, components, assembly, installation, adjustment, and care.

Components & Hardware

Key components included: Cabinet frame panels, adjustable shelves, mounting brackets, screws, dowels, cam locks, and assembly instructions.

Safety Instructions

Read all instructions before assembly. Ensure safe handling and installation.

1. Use proper tools: Phillips screwdriver, hammer, level.
2. Assemble on soft surface to avoid scratches.
3. Check wall structure before mounting; use wall studs or appropriate anchors.
4. Secure cabinet to wall to prevent tipping, especially if children are present.

WARNING! Cabinet is heavy; lift with care and use two people. Ensure all connections are tight and secure.

Assembly Steps

Follow numbered steps in instruction booklet. Typical assembly sequence:

1. Lay side panels flat; attach bottom panel using dowels and cam locks.
2. Attach top panel in same manner.
3. Insert back panel into grooves; secure with provided screws.
4. Install adjustable shelf supports at desired heights.
5. Attach mounting brackets to rear of cabinet.
6. Place shelves on supports.

Tip: Do not fully tighten cam locks until all panels are aligned.

Specifications

• Model: SEKTION 304.508.45
• Dimensions: Height: 80 cm, Width: 60 cm, Depth: 37 cm (approx.)
• Material: Particleboard with melamine foil
• Weight Capacity: Shelves: up to 15 kg each (evenly distributed)
• Color: White
• Compatible Systems: SEKTION kitchen system, VOXTORP, BODBYN, etc.
• Hardware: Adjustable legs, soft-closing hinges (sold separately)

Installation & Mounting

For wall-mounted or floor-standing installation.

1. Locate wall studs using stud finder; mark positions.
2. Hold cabinet against wall; ensure it is level.
3. Secure cabinet to wall using mounting brackets and screws into studs.
4. For floor installation, attach adjustable legs to bottom panel.
5. Connect adjacent cabinets using connecting screws.

CAUTION! Always secure cabinet to wall to prevent tipping hazard.

Adjusting Shelves & Doors

Shelves are adjustable via shelf support pins.

1. Remove shelf by lifting up and pulling forward.
2. Reposition shelf support pins to desired height.
3. Replace shelf, ensuring it rests securely on all pins.
4. For doors: Attach hinges to door first, then mount to cabinet using provided screws.
5. Adjust door alignment via hinge screws (up/down, left/right, in/out).

Note: Use soft-closing hinges for quiet operation.

Compatibility & Accessories

Compatible with IKEA SEKTION system components.

• Doors: VOXTORP, BODBYN, GRIMSLOV, etc.
• Drawers: MAXIMERA drawer system
• Interior Organizers: UTRUSTA shelves, KOMPLEMENT dividers
• Handles: Various IKEA handles and knobs
• Lighting: LED strips (e.g., MITTLED)

Refer to IKEA catalog or website for full compatibility list.

Care & Maintenance

Clean with damp cloth and mild detergent. Avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals; avoid excessive moisture. Dry immediately after cleaning.

Troubleshooting

Tip: Use wood glue on dowels for extra stability (optional).

Warranty & Support

IKEA limited warranty applies. For assistance, visit IKEA store or www.ikea.com. Keep receipt for warranty claims.

Contact: IKEA customer service: 1-888-888-4532