IKEA SEKTION 092.740.43 Cabinet Frame instructions manual

The IKEA SEKTION 092.740.43 is a versatile cabinet frame designed for kitchen and storage solutions, featuring a white finish, adjustable legs, and compatibility with various SEKTION series doors and drawers. It is constructed from particleboard, fiberboard, and ABS plastic. Below are key sections for safety, parts list, assembly, installation, adjustment, and care.

Parts & Hardware Included

Key components: Cabinet frame panels, adjustable legs, cam locks, screws, dowels, and mounting brackets.

Tools Required

Gather these tools before starting assembly.

1. Phillips screwdriver (size #2).
2. Hammer (for tapping dowels).
3. Level (for ensuring cabinet is straight).
4. Measuring tape.
5. Pencil (for marking wall).

NOTE: Power drill optional but recommended for faster assembly.

Safety Instructions

Read all instructions before assembly.

1. Assemble on a soft surface to avoid scratching panels.
2. Use two people for lifting and mounting to prevent injury.
3. Ensure cabinet is securely attached to wall if mounting.
4. Keep small hardware away from children.

WARNING! Cabinet is heavy; improper lifting can cause back injury. Always secure to wall to prevent tipping.

Assembly Steps

Follow steps in order for proper assembly.

1. Attach legs: Screw adjustable legs into bottom panel at all four corners.
2. Insert dowels: Tap wooden dowels into pre-drilled holes on side panels.
3. Connect side panels: Align side panels with top and bottom panels using dowels.
4. Secure with cam locks: Insert cam locks into designated holes and turn 90° clockwise to lock panels together.
5. Attach back panel: Place back panel into grooves and secure with provided screws.
6. Check stability: Ensure all connections are tight and cabinet sits level on legs.

Tip: Do not overtighten cam locks; turn until snug.

Installation & Mounting

For wall-mounted installation to prevent tipping.

1. Position cabinet in desired location and adjust legs until level.
2. Mark wall through mounting bracket holes with pencil.
3. Drill pilot holes at marked spots and insert wall anchors (not included) if needed.
4. Secure cabinet to wall using mounting brackets and screws.
5. Re-check level after mounting.

CAUTION! Always mount to wall studs for maximum stability, especially in homes with children.

Adjusting Doors & Drawers

Compatible with SEKTION doors and drawers.

1. Door installation: Attach hinges to door first, then mount to cabinet side panel.
2. Height adjustment: Use screw on hinge to raise or lower door.
3. Depth adjustment: Turn hinge screw to move door closer to or away from frame.
4. Drawer rails: Attach rails to cabinet sides, then slide drawer onto rails until click.
5. Alignment: Adjust drawer front using screws on inside of drawer.

Note: Minor adjustments may be needed over time as cabinet settles.

Weight Limits & Specifications

• Dimensions: Height: 30", Width: 15", Depth: 15" (without doors).
• Material: Particleboard, fiberboard, ABS plastic.
• Finish: White foil.
• Max Load Capacity: 55 lbs (25 kg) distributed evenly.
• Adjustable Leg Range: 0.5" to 4".
• Compatibility: SEKTION series doors, drawers, and interior organizers.

Care & Maintenance

Clean with damp cloth; avoid abrasive cleaners.

1. Wipe surfaces with soft, damp cloth and mild detergent.
2. Dry immediately to prevent moisture damage.
3. Tighten screws and cam locks periodically if cabinet becomes loose.
4. Do not place hot items directly on surface.

CAUTION! Do not use harsh chemicals, ammonia, or abrasive pads.

Troubleshooting

Reset: Disassemble and reassemble if major issues occur.

Warranty & Support

IKEA limited warranty: 10 years for SEKTION frames from date of purchase. Warranty covers manufacturing defects. Proof of purchase required. For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com.

Support: 1-888-888-4532; www.ikea.com/us/en/customer-service