IKEA SEKTION 090.408.03 Cabinet Frame instructions manual

The IKEA SEKTION 090.408.03 is a versatile cabinet frame designed for kitchen and storage solutions, featuring a white finish, adjustable legs, and compatibility with various SEKTION doors, drawers, and interior fittings. Below are key sections for safety, parts list, assembly, installation, adjustment, and care.

1. Parts and Hardware Included 2. Tools Required 3. Assembly Instructions 4. Installation and Mounting 5. Adjusting Cabinet Doors and Shelves 6. Specifications 7. Safety Information 8. Care and Maintenance 9. Troubleshooting 10. Warranty and Support

Parts and Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet frame panels, adjustable legs, cam locks, screws, dowels, and mounting brackets.

Part Name	Quantity	Description
Cabinet Frame (Main Body)	1	White melamine-coated particleboard
Adjustable Legs	4	Plastic legs with screw adjustment
Cam Locks	8	For securing side panels
Screws	Various	For legs, hinges, and mounting
Dowels	12	Wooden pins for panel alignment
Mounting Brackets	2	For wall attachment (if required)
Back Panel	1	Fiberboard back panel
Instruction Manual	1	This document

Tools Required

Gather these tools before starting assembly.

Phillips screwdriver (size #2).
Hammer (for inserting dowels).
Drill (optional, for wall mounting).
Level (for ensuring cabinet is straight).
Tape measure.
Pencil (for marking).

WARNING! Use tools carefully to avoid damaging parts or injury.

Assembly Instructions

Follow steps in order. Work on a clean, flat surface.

Attach adjustable legs: Screw legs into pre-drilled holes at bottom corners of frame.
Insert dowels: Hammer dowels into side panels as indicated by markings.
Join side panels to top/bottom: Align dowels with holes, then secure with cam locks.
Install back panel: Place back panel into grooves, secure with provided screws.
Attach mounting brackets: If wall-mounting, install brackets to top rear of frame.
Check stability: Ensure all cam locks are tightened and frame is square.

CAUTION! Do not overtighten screws; this may strip the particleboard.

Installation and Mounting

Decide if cabinet will be freestanding or wall-mounted.

Freestanding: Adjust legs to desired height; use level to ensure cabinet is even.
Wall-mounted: Locate wall studs; drill pilot holes; align cabinet brackets; secure with heavy-duty screws.
Multiple cabinets: Align frames side-by-side; use connecting screws provided with SEKTION system.
Final check: Ensure cabinet is level and secure before loading with items.

Tip: For wall mounting, always anchor into studs for maximum safety.

Adjusting Cabinet Doors and Shelves

Compatible with SEKTION hinges and shelving systems.

Door Installation: Attach hinges to door first, then mount to frame. Adjust hinges for alignment (up/down, left/right, depth).

Shelves: Insert shelf supports into pre-drilled holes at desired height. Place shelf on supports.

Drawer Runners: Install runners according to SEKTION drawer assembly instructions.

Adjustments: Use a screwdriver to turn hinge screws for fine-tuning door position.

Specifications

Model: SEKTION 090.408.03
Color: White
Material: Particleboard with melamine foil
Dimensions (HxWxD): 30" x 15" x 15" (approx.)
Weight Capacity: Max 55 lbs per shelf (evenly distributed)
Adjustable Leg Height: 0" to 6"
Compatibility: SEKTION doors, drawers, interior organizers
Warranty: Limited 10-year warranty

Safety Information

Read all instructions before assembly and use.

Always secure wall-mounted cabinets to studs. Do not rely on drywall anchors alone for heavy loads.
Do not exceed the stated weight limit for shelves.
Keep cabinet away from direct heat sources and excessive moisture.
Ensure cabinet is level and stable before use.
Keep small parts away from children during assembly.

WARNING! An unsecured cabinet can tip over, causing serious injury. Always secure according to instructions.

Care and Maintenance

Clean with a damp cloth and mild detergent. Wipe dry immediately.

DO NOT use abrasive cleaners, scouring pads, or harsh chemicals.

DO NOT allow water to pool on surfaces or edges.

Periodically check tightness of screws and cam locks, especially after moving the cabinet.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Cabinet wobbles	Uneven legs or floor	Adjust individual legs; use shims if necessary.
Doors misaligned	Hinges need adjustment	Use screwdriver to adjust hinge screws (in/out, up/down).
Shelves sagging	Weight limit exceeded	Reduce load; ensure weight is evenly distributed.
Cam lock not tightening	Not fully engaged	Disassemble and re-engage; ensure dowels are properly inserted.
Difficulty attaching back panel	Frame not square	Loosen cam locks, square the frame, then retighten.

Note: For missing parts or damaged components, contact IKEA customer service.

Warranty and Support

This IKEA product is covered by a limited 10-year warranty. The warranty covers defects in materials and workmanship under normal household use.

For assembly help, missing parts, or warranty claims:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for warranty details.

Always retain your proof of purchase.