IKEA SEKTION 002.653.97 Cabinet Frame instructions manual

The IKEA SEKTION 002.653.97 is a versatile cabinet frame designed for kitchen and storage solutions, featuring a white finish, adjustable legs, and compatibility with various SEKTION doors and drawers. It is constructed from particleboard, fiberboard, and ABS plastic, and requires assembly. Below are key sections for safety, parts list, assembly instructions, installation, adjustment, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Installation & Mounting 5. Adjusting Cabinet Frame 6. Attaching Doors & Drawers 7. Weight Limits & Specifications 8. Care & Maintenance 9. Troubleshooting 10. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Cabinet frame panels, adjustable legs, cam locks, screws, dowels, mounting brackets.

Part Name	Quantity	Description
Cabinet side panel	2	Left and right side panels
Cabinet top/bottom panel	2	Upper and lower frame panels
Back panel	1	Fiberboard back panel
Adjustable legs	4	Plastic legs with screw adjustment
Cam locks & dowels	Set	For connecting panels
Mounting screws	Set	For wall mounting (if applicable)
Assembly instructions	1	This manual

Safety Instructions

Read all instructions before assembly. Use proper tools.

Assembly requires two people to prevent injury and damage.
Ensure the cabinet is placed on a stable, level surface.
Use the provided hardware only; do not substitute.
Keep small parts away from children to avoid choking hazards.
For wall-mounted installation, secure to wall studs using appropriate hardware (not always included).

WARNING! Cabinet is heavy; lift with care. Ensure all connections are tight before use.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Prepare workspace: Lay out all parts on a clean, soft surface to avoid scratches.
Attach legs: Screw the four adjustable legs into the pre-drilled holes on the bottom panel.
Connect side panels: Insert dowels into side panels, align with top and bottom panels, and secure using cam locks (turn clockwise until tight).
Install back panel: Place the back panel into the groove on the rear of the frame. Secure with provided screws if required.
Check stability: Ensure all cam locks are fully tightened and the frame is square.

Tip: Do not fully tighten cam locks until all panels are aligned.

Installation & Mounting

For freestanding or wall-mounted installation.

Freestanding: Adjust legs to desired height and ensure cabinet is level using a spirit level.
Wall-mounted (optional): Locate wall studs. Attach mounting brackets to the cabinet back and secure to studs using suitable screws (may need to be purchased separately).
Multiple cabinets: Install cabinets side-by-side, ensuring they are level and flush before securing together.

CAUTION! If wall mounting, the cabinet must be securely anchored to support its weight and contents.

Adjusting Cabinet Frame

Adjustments may be needed for uneven floors or alignment.

Leg height: Turn legs clockwise to raise, counterclockwise to lower. Use a level on top of the cabinet.
Door alignment: After attaching doors, adjust hinges using a screwdriver to ensure doors are level and close properly.
Panel alignment: Loosen cam locks slightly to adjust panel positions, then retighten.

Attaching Doors & Drawers

Compatible with SEKTION door and drawer fronts (sold separately).

Mount hinges: Attach hinges to the door according to door instructions.
Attach to frame: Hook hinges onto the mounting plates installed on the cabinet side panels.
Adjust hinges: Use adjustment screws on hinges for height, depth, and side-to-side alignment.
Drawer runners: Install drawer runners inside cabinet according to drawer system instructions.

Note: Doors and drawers are not included with the frame.

Weight Limits & Specifications

Frame Material: Particleboard, Fiberboard, ABS plastic.
Finish: White.
Dimensions (approx.): Height: 30", Width: 15", Depth: 15" (verify with product label).
Max Load Weight: 55 lbs (25 kg) distributed evenly across the bottom shelf.
Adjustable Leg Range: Approx. 0.5" (13mm).
Compatibility: SEKTION system doors, drawers, and interior organizers.

Care & Maintenance

Clean with a damp cloth and mild detergent. Avoid abrasive cleaners.

DO NOT use harsh chemicals, ammonia-based cleaners, or excessive water. Dry immediately after cleaning.

Check tightness of screws and cam locks periodically, especially after moving the cabinet.

Troubleshooting

Issue	Possible Cause	Solution
Cabinet wobbles	Uneven floor, legs not adjusted	Adjust individual legs until stable and level.
Panels not aligning	Cam locks not fully engaged or dowels misaligned	Disassemble step, ensure dowels are fully inserted, then tighten cam locks.
Doors not closing properly	Hinges misaligned	Adjust hinge screws for height, depth, and side pressure.
Shelf sagging	Weight limit exceeded	Reduce load. Do not exceed maximum weight capacity.
Hardware missing	Packaging error	Contact IKEA customer service for replacement parts.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty booklet included with purchase or available at IKEA stores.

For missing parts, assembly help, or product support:

Visit: www.ikea.com
Contact IKEA customer service at 1-888-888-4532
Visit your local IKEA store with your receipt and product information (002.653.97).

Recycling: Dispose of packaging materials responsibly. The cabinet frame is recyclable where facilities exist.