IKEA SEGLARÖ 604.759.72 Umbrella instructions manual

The IKEA SEGLARÖ 604.759.72 is a freestanding outdoor umbrella designed for patios, decks, and gardens. It features a durable, weather-resistant polyester canopy, a sturdy steel pole with powder-coated finish, a crank handle for easy opening and closing, a tilt function for adjustable shade, and a weighted base for stability. Below are key sections for safety, assembly, operation, care, and troubleshooting.

Features at a Glance

Key components: Polyester canopy, Steel pole with crank mechanism, Tilt adjustment lever, Weighted base, Protective cover.

Assembly Instructions

Unpack all parts and check contents against included parts list.

1. Assemble the base: Fill the weighted base with sand or water as per instructions for stability.
2. Attach the pole: Insert the lower pole section into the base socket and secure with provided bolts.
3. Install the canopy: Attach the canopy to the ribs, ensuring even distribution and secure fastening.
4. Connect the ribs: Hook the ribs onto the sliding mechanism on the pole.
5. Attach the crank handle: Secure the crank handle to the designated position on the pole.

WARNING! Assembly requires two people. Ensure all bolts and connections are tightened securely.

First-Time Setup

After assembly, position the umbrella in your desired location.

1. Place the base on a flat, stable surface to prevent tipping.
2. Fill the base with recommended weight (sand/water) for maximum stability.
3. Open the umbrella: Turn the crank handle clockwise until the canopy is fully extended.
4. Adjust the tilt: Use the tilt lever to set the desired angle for shade.
5. Secure the umbrella: Ensure it is stable before use.

CAUTION! Do not use in high winds. Always close and secure the umbrella in windy conditions.

Specifications

• Product Name: SEGLARÖ
• Article Number: 604.759.72
• Type: Freestanding Garden Umbrella
• Canopy Diameter: 3 meters
• Total Height: 2.4 meters
• Frame Material: Steel, powder-coated
• Canopy Material: 100% polyester, UV-resistant
• Mechanism: Crank handle with tilt function
• Base: Weighted, fillable with sand or water
• Weight: Approximately 15 kg (total)
• Recommended Use: Outdoor residential use on patios, decks, gardens

Controls and Operation

Primary controls: Crank handle, Tilt adjustment lever.

Opening: Turn the crank handle clockwise slowly and evenly until the canopy is fully open. Do not force the crank.

Closing: Turn the crank handle counterclockwise to retract the canopy. Ensure the fabric folds neatly without catching.

Tilt Adjustment: Locate the tilt lever on the pole. Press or pull the lever to unlock, adjust the canopy to the desired angle, then release to lock in position.

Note: Always operate the umbrella smoothly and without sudden force to prevent damage to the mechanism.

Tilt Adjustment

The tilt function allows you to block the sun from different angles throughout the day.

1. Ensure the umbrella is fully open before adjusting the tilt.
2. Locate the tilt lever on the pole (usually just below the canopy).
3. Press and hold the lever to disengage the lock.
4. Gently push or pull the canopy to the desired angle.
5. Release the lever to lock the canopy in the new position.
6. Test stability by gently shaking the pole. It should not move if properly locked.

Tip: Do not tilt the umbrella beyond its designed range (usually indicated by marks on the mechanism).

Care & Maintenance

Regular care extends the life of your umbrella.

1. Cleaning: Use a soft brush or cloth with mild soap and water to clean the canopy. Rinse thoroughly and allow to air dry completely before closing.
2. Frame: Wipe the pole and ribs with a damp cloth. Do not use abrasive cleaners.
3. Mechanism: Keep the crank and tilt mechanisms free of dirt and debris. Lubricate moving parts annually with a silicone-based lubricant if needed.
4. Mold/Mildew: If mold appears, clean with a solution of water and white vinegar. Dry completely.

CAUTION! Do not machine wash the canopy. Do not use bleach or harsh chemicals.

Storage

Proper storage protects the umbrella during off-seasons or bad weather.

1. Close the umbrella completely and ensure it is dry.
2. Use the included protective cover to shield it from dust and moisture.
3. If storing indoors, choose a cool, dry place.
4. If leaving outside, ensure the cover is securely fastened and the base is stable.
5. For long-term storage, consider disassembling and storing parts in a dry location.

WARNING! Never store the umbrella while wet, as this can cause mold and fabric damage.

Safety Information

• Always secure the weighted base properly before use.
• Close the umbrella during strong winds, storms, or when unattended for long periods.
• Keep children and pets away from the operating mechanism.
• Do not hang items from the ribs or canopy, as this can damage the structure.
• Ensure the umbrella is on a flat, stable surface to prevent tipping.
• Do not use the umbrella as a support or to hang lights or other objects unless specifically designed for it.
• Inspect regularly for signs of wear, rust, or damage, especially before seasonal use.

Warranty & Support

IKEA limited warranty applies. Refer to the IKEA warranty card included with your purchase for specific terms and duration.

For assembly assistance, missing parts, or product support:

• Visit the IKEA website: www.ikea.com
• Contact IKEA customer service at 1-888-888-4532
• Refer to your local IKEA store

Retain your receipt as proof of purchase for warranty claims.

Troubleshooting

Safety First: If the umbrella is structurally damaged (bent pole, broken ribs), discontinue use immediately.

Replacement Parts: Available through IKEA customer service or your local IKEA store.