IKEA SEGERÖN 905.108.08 Bar Stool instructions manual

The IKEA SEGERÖN 905.108.08 is a modern bar stool featuring a sturdy steel frame, a comfortable seat made of durable plastic, and a footrest for added comfort. It is designed for indoor use at kitchen islands, breakfast bars, or home bars. The stool requires simple assembly and supports a maximum weight of 110 kg (242 lbs). Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Instructions 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Warranty Information 7. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Key components: Seat, Leg Frame, Footrest, Allen Key, Screws, Washers.

Part NameQuantityDescription
Seat1Plastic seat with pre-drilled holes
Leg Frame1Steel frame with attached footrest
Allen Key1For tightening screws
Screws4M8 x 20mm
Washers4For screw installation

Safety Instructions

Read all instructions before assembly. Ensure a safe environment.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use only the provided tools and hardware.
  3. Do not exceed the maximum weight limit of 110 kg (242 lbs).
  4. Keep children and pets away during assembly.
  5. Check all connections are tight before first use.

WARNING! Improper assembly can lead to instability and injury. Ensure all screws are fully tightened.

Assembly Instructions

Estimated assembly time: 15-20 minutes. Follow steps in order.

  1. Prepare Parts: Lay out all parts and hardware. Identify the seat (top) and leg frame (bottom).
  2. Attach Seat to Frame: Place the seat upside down on a soft surface. Position the leg frame so the screw holes align with those on the seat.
  3. Insert Screws: Insert a washer onto each screw. Screw each of the 4 screws through the frame into the seat base. Hand-tighten first.
  4. Tighten Screws: Use the provided Allen key to fully tighten all screws in a diagonal pattern (e.g., top-left, bottom-right).
  5. Final Check: Turn the stool upright. Apply gentle pressure to ensure it is stable and does not wobble.

CAUTION! Do not overtighten screws, as this may strip the threads or damage the plastic.

Specifications

Care & Maintenance

To maintain appearance and longevity, clean regularly.

  1. Seat: Wipe with a damp cloth and mild detergent. Do not use abrasive cleaners.
  2. Frame: Dust with a dry cloth. For stubborn marks, use a slightly damp cloth and dry immediately.
  3. Inspection: Periodically check that all screws are tight. Re-tighten if necessary.

CAUTION! Do not use harsh chemicals, solvents, or steam cleaners. Avoid prolonged exposure to direct sunlight or moisture.

Warranty Information

IKEA provides a limited warranty for this product. Refer to the IKEA warranty terms included with your purchase or available at www.ikea.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Stool wobblesUneven floor or loose screwsCheck floor level. Tighten all screws with the Allen key.
Screw won't tightenCross-threaded or stripped holeDo not force. Unscrew completely, realign, and start again. If hole is damaged, contact IKEA for spare parts.
Seat feels unstableScrews not fully seatedEnsure all 4 screws are tightened securely into the seat base.
Scratches on frame during assemblyAssembly on hard surfaceAssemble on a soft cloth or carpet to protect the finish.

Missing Parts? Contact IKEA customer service with your article number (905.108.08) for replacement parts.

Support: Visit www.ikea.com or your local IKEA store.

IKEA SEGERÖN 905.108.08 Bar Stool instructions manual © - All Rights Reserved 2025