IKEA SAXHYTTAN 905.049.92 Table Lamp instructions manual

The IKEA SAXHYTTAN 905.049.92 is a stylish and functional table lamp designed for ambient lighting. It features a durable metal shade, a stable base, an integrated on/off switch, and uses an E14 bulb (max 7W LED or equivalent). Below are key sections for safety, assembly, operation, care, and troubleshooting.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Operation & Controls 6. Bulb Replacement 7. Care & Cleaning 8. Troubleshooting 9. Warranty & Support

Parts & Tools Included

Before assembly, verify all parts are present. Key components: Lamp base, metal shade, bulb socket with cord and switch, screw for shade attachment, instruction manual.

Part Name	Quantity	Description
Lamp Base	1	Weighted base for stability
Metal Shade	1	Protective and decorative cover
Bulb Socket Assembly	1	Pre-wired with cord, plug, and integrated switch
Attachment Screw	1	For securing shade to base
Instruction Manual	1	This document

Note: Bulb not included. Requires 1x E14 bulb (max 7W LED recommended).

Safety Information

WARNING! Read all instructions before assembly and use.

Electrical Safety: Use only with E14 bulb, max 7W LED or equivalent. Do not exceed wattage.
Placement: Place on a stable, level, heat-resistant surface away from edges.
Children & Pets: Keep out of reach of young children. The lamp can become warm during use.
Inspection: Do not use if cord, plug, or socket is damaged. Disconnect from power before cleaning or bulb replacement.
Environment: For indoor use only. Not suitable for bathrooms or other damp locations.

CAUTION! Risk of electric shock. Always unplug from the wall outlet before performing any maintenance.

Assembly Instructions

Estimated assembly time: 5-10 minutes. No tools required.

Prepare Workspace: Unpack all parts on a clean, soft surface to prevent scratches.
Attach Socket to Base: Insert the bulb socket through the central hole in the lamp base from the bottom. Ensure it sits firmly.
Secure the Shade: Place the metal shade over the bulb socket. Align the hole in the shade with the threaded post on the socket.
Fasten Shade: Screw the provided attachment screw into the threaded post from the top of the shade until the shade is snug and secure. Do not overtighten.
Insert Bulb: Screw an E14 bulb (max 7W LED recommended) into the socket by hand. Do not force.
Final Check: Ensure all parts are firmly attached and the lamp is stable on its base.

Tip: Route the power cord neatly to avoid tripping hazards.

Specifications

Product Name: SAXHYTTAN
Article Number: 905.049.92
Type: Table Lamp
Material: Base: Steel, powder-coated. Shade: Steel.
Color: Black
Bulb Socket: 1 x E14
Max Wattage: 7W LED (or equivalent energy-saving bulb)
Power Cord Length: Approximately 1.8 meters (6 feet)
Switch Type: Integrated inline switch on cord
Dimensions (approx.): Height: 30 cm, Width: 18 cm
Weight: 0.8 kg

Operation & Controls

Operation is simple via the integrated switch on the power cord.

Plug In: Insert the plug into a standard 120V AC wall outlet.
Turn On/Off: Press the switch on the cord to toggle the lamp on and off.
Adjustment: The lamp is a fixed design. For directed light, simply rotate the entire lamp on its base.

Note: The lamp and shade may become warm during extended use. This is normal.

Bulb Replacement

Always allow the bulb to cool completely before handling.

Disconnect Power: Unplug the lamp from the wall outlet.
Remove Old Bulb: Gently unscrew the old bulb counterclockwise by hand.
Insert New Bulb: Screw a new E14 bulb (max 7W LED recommended) clockwise into the socket until snug. Do not overtighten.
Restore Power: Plug the lamp back in and test with the switch.

WARNING! Use only the specified bulb type and wattage to prevent overheating and damage.

Care & Cleaning

Unplug the lamp and allow it to cool completely before cleaning.

Exterior: Wipe the base and shade with a soft, dry or slightly damp cloth.
Stubborn Marks: Use a mild soap solution on the cloth. Never spray cleaner directly onto the lamp.
Drying: Wipe dry immediately with a clean, soft cloth.
Cord: Wipe the power cord with a dry cloth.

CAUTION! Do not use abrasive cleaners, scouring pads, or solvents. Do not immerse any part of the lamp in water.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Not plugged in; Bulb burnt out; Switch off	Ensure plug is firmly in outlet; Replace bulb; Press switch to ON position.
Lamp flickers	Loose bulb; Faulty bulb	Turn off, unplug, and ensure bulb is screwed in tightly. Try a new bulb.
Lamp gets very hot	Bulb wattage too high	Immediately turn off and unplug. Replace with a bulb of 7W LED or lower equivalent.
Lamp is unstable	Base not level; Surface uneven	Place lamp on a stable, level surface. Ensure all parts are fully assembled and secure.
Shade is loose	Attachment screw not tight	Unplug lamp. Gently tighten the screw on top of the shade. Do not overtighten.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included with your purchase or available at IKEA stores.

Recycling: Dispose of the lamp and bulb according to local electronic waste (e-waste) regulations. Do not dispose of with household trash.

For Support:
Visit: www.ikea.com
Contact your local IKEA store.
Have your article number (905.049.92) ready when contacting support.