IKEA SAXHYTTAN 105.049.86 Table Lamp instructions manual

The IKEA SAXHYTTAN 105.049.86 is a stylish and functional table lamp designed for home or office use. It features a durable metal shade, a stable base, an E26/E27 socket compatible with LED, CFL, or incandescent bulbs (max 13W LED/15W CFL/40W incandescent), an inline switch on the power cord, and a 1.8-meter cord with a 2-pin plug. Below are key sections for safety, assembly, installation, operation, care, and troubleshooting.

1. Safety Information 2. Parts Included 3. Assembly Instructions 4. Installation & Setup 5. Specifications 6. Operation 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Support

Safety Information

Important safety warnings and precautions for using the SAXHYTTAN table lamp.

Warning	Description
Electrical Safety	Use only with correct voltage (120V AC). Do not use if cord or plug is damaged.
Bulb Compatibility	Use only E26/E27 base bulbs with max wattage: 13W LED, 15W CFL, or 40W incandescent.
Heat & Placement	Ensure lamp is on stable surface away from flammable materials. Allow bulb to cool before touching.
Children & Pets	Keep out of reach of young children and pets. Supervise during use.
Water & Moisture	Do not use in damp areas (bathrooms) unless specified. Never immerse in water.
Service	Do not disassemble lamp. For repairs, contact IKEA or qualified technician.

Parts Included

Unpack and verify all components are present before assembly.

Lamp base (metal, pre-assembled)
Lamp shade (metal, with pre-attached hardware)
Power cord with inline switch and plug (1.8m length)
Instruction manual (this document)
Required hardware (screws, if applicable) included in base

NOTE: Bulb not included. Ensure you have a compatible E26/E27 bulb.

Assembly Instructions

Follow these steps to assemble your SAXHYTTAN table lamp. No tools required.

Place the lamp base on a flat, stable surface.
If shade is separate, align it with the base socket and gently press or twist clockwise until secure (check for locking mechanism).
Ensure all connections between base and shade are tight and stable.
Route the power cord neatly from the base to your outlet location.

CAUTION! Do not force parts. If they do not fit easily, check alignment.

Installation & Setup

Prepare the lamp for first use.

Install bulb: Ensure lamp is unplugged. Screw compatible bulb (E26/E27, max 13W LED) into socket firmly but do not overtighten.
Place lamp: Position on stable, level surface (table, desk, nightstand) away from edges.
Plug in: Insert plug into a standard 120V AC wall outlet.
Test: Use the inline switch on the cord to turn lamp ON/OFF. The lamp should illuminate.

WARNING! Always unplug lamp before installing or replacing bulb.

Specifications

Model: SAXHYTTAN 105.049.86
Dimensions: Height: approx. 35 cm (13.8"), Base diameter: approx. 15 cm (5.9")
Material: Shade and base: Steel, powder-coated. Interior: White.
Socket: E26/E27, standard US/International
Max Bulb Wattage: 13W LED / 15W CFL / 40W Incandescent
Cord: 1.8 meters (71 inches), white, with inline switch
Plug: 2-pin, non-polarized (US standard)
Voltage: 120V AC, 60Hz
Weight: Approx. 1.2 kg (2.65 lbs)

Operation

Using your SAXHYTTAN table lamp.

Power Switch: The inline switch on the cord controls ON/OFF. Flip to desired position.

Bulb Replacement: 1. Unplug lamp. 2. Allow bulb to cool completely. 3. Unscrew old bulb. 4. Screw in new compatible bulb. 5. Plug in and test.

Adjustment: This model has a fixed position (non-adjustable shade). For directed light, position the entire lamp as needed.

Care & Maintenance

Keep your lamp clean and functioning properly.

Unplug lamp before any cleaning.
Use a dry, soft cloth to dust shade and base.
For marks, use a slightly damp cloth. Dry immediately.
Do not use abrasive cleaners, chemicals, or solvents.
Store in a dry place when not in use for extended periods.

CAUTION! Never immerse lamp in water or let moisture enter electrical parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	No power, bulb faulty, switch off	Check outlet; try another device. Replace bulb. Ensure inline switch is ON.
Flickering light	Loose bulb, incompatible bulb, faulty bulb	Turn off, unplug, tighten bulb. Ensure bulb type/wattage is correct. Try new bulb.
Lamp gets very hot	Bulb wattage too high, poor ventilation	Use bulb within specified max wattage. Ensure lamp is in open area, not covered.
Shade is loose	Not fully assembled	Unplug lamp. Check connection between shade and base; secure properly.
Switch not working	Faulty switch or internal wiring	Do not disassemble. Contact IKEA support for repair/replacement.

Warranty & Support

IKEA limited warranty applies. See IKEA terms or receipt for details.

Support: For questions or missing parts, contact IKEA customer service:

Phone: 1-888-888-4532 (IKEA-USA)
Website: www.ikea-usa.com
Visit your local IKEA store.

Recycling: Dispose of lamp and bulbs according to local regulations. Do not dispose with household waste.