IKEA SANDTORG 005.017.90 Mirror instructions manual

The IKEA SANDTORG 005.017.90 is a wall-mounted mirror designed for bathroom or hallway use. It features a rectangular shape with a simple, clean frame, easy mounting hardware, and safety backing. Below are key sections for safety, features, installation, setup, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Rectangular mirror glass, mounting frame, wall brackets, screws and plugs, safety backing film.

Feature	Description
Mirror Dimensions	Rectangular shape as per model specifications
Frame Material	Simple, clean frame design
Mounting Type	Wall-mounted with included hardware
Safety Backing	Protective film to prevent shattering
Intended Use	Bathroom, hallway, or bedroom
Hardware Included	Screws, wall plugs, brackets

Installation

Unpack and inspect all parts. Ensure wall is suitable for mounting.

Identify mounting location: Choose a sturdy wall, free from moisture damage for bathrooms.
Mark bracket positions: Use included template or measure according to instructions.
Drill holes: Use appropriate drill bit for wall plugs.
Attach brackets: Secure brackets to wall with screws and plugs.
Hang mirror: Carefully lift mirror and hook onto mounted brackets.
Secure mirror: Ensure mirror is level and firmly attached.

WARNING! Mirror is heavy and fragile; use two people for installation. Ensure wall can support weight.

First-Time Setup

After installation, perform final checks.

Check level: Use a spirit level to ensure mirror is horizontal.
Secure all screws: Tighten any additional securing screws.
Remove protective film: Peel off any protective coating from mirror surface.
Clean surface: Wipe mirror with a soft, dry cloth.

CAUTION! Do not overtighten screws as this may damage frame or wall.

Specifications

Model: SANDTORG 005.017.90
Dimensions: As per product label (width x height x depth)
Weight: Refer to product packaging
Frame Color: As specified for model variant
Glass Type: Safety-backed mirror glass
Mounting Hardware: Included (screws, plugs, brackets)
Intended Room: Bathroom (if suitable for humid environments), hallway, bedroom

Controls and Settings

This mirror has no electronic controls or settings. Adjustment refers to physical positioning during installation.

Positioning: Ensure mirror is level during mounting. Frame: No adjustable settings. Mounting: Brackets may allow slight forward/backward tilt adjustment during installation.

Connecting Devices

This mirror does not connect to electronic devices. It is a standalone decorative/functional item.

Note: For illuminated mirror variants, refer to separate electrical installation instructions.

Playing DVD Media

This mirror does not play DVD media. It is a non-electronic mirror.

Note: If you have a model with integrated media features, refer to the specific media device manual.

Accessibility Features

Ensure mirror is mounted at a height suitable for all intended users. Consider mounting height for wheelchair accessibility if required.

Care & Cleaning

Unplug any electrical features before cleaning (if applicable). Use a soft, damp cloth with mild, non-abrasive cleaner. Dry thoroughly.

CAUTION! Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive moisture on frame joints.

Regulatory Information

IKEA of Sweden. Complies with applicable furniture and glass safety standards. For support, visit www.ikea.com or contact your local IKEA store.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mirror not level	Uneven mounting or wall	Loosen brackets, adjust position, re-tighten. Use level.
Mirror feels loose	Brackets not fully secured	Check all screws are tight. Ensure wall plugs are gripping properly.
Frame damage	Transport or installation mishandling	Handle with care during installation. Contact IKEA for part replacement if damaged.
Glass appears cloudy	Protective film not removed or cleaning residue	Remove any remaining protective film. Clean with appropriate glass cleaner.
Cannot mount to wall	Wrong wall type or tools	Ensure wall is solid (stud/ masonry). Use correct drill bits and anchors for your wall type.

Service: Contact IKEA customer service for missing parts or damage. www.ikea.com