IKEA SANDSBERG 704.129.60 Chair instructions manual

The IKEA SANDSBERG 704.129.60 is a modern, sturdy chair designed for everyday use. It features a powder-coated steel frame for durability, a comfortable seat and backrest, and a sleek design suitable for various settings such as dining rooms, home offices, or kitchens. Below are key sections for safety, assembly, care, usage, and troubleshooting.

1. Parts & Tools Included 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Proper Usage 7. Weight Capacity & Limitations 8. Warranty Information 9. Disposal & Recycling 10. Troubleshooting

Parts & Tools Included

Before assembly, check that you have all the listed parts and tools.

Part/Tool	Quantity	Description
Chair Frame (Steel)	1	Main structure with pre-attached legs
Seat Panel	1	Pre-drilled wooden or composite seat
Backrest	1	Pre-drilled back panel
Assembly Screws	8	Hex-head screws for attaching seat and backrest
Plastic Caps	8	To cover screw heads
Allen Key	1	Tool provided for assembly
Instruction Manual	1	This document

Safety Information

Please read all safety instructions before assembly and use.

Assembly Surface: Assemble on a soft, clean surface (e.g., carpet or blanket) to prevent scratches.
Adult Assembly: This product should be assembled by an adult. Keep small parts away from children.
Tool Use: Use only the provided Allen key. Do not overtighten screws.
Stability Check: Ensure all screws are firmly tightened before use.

WARNING! Do not stand on the chair. Do not exceed the maximum weight capacity. Inspect regularly for loose parts.

Assembly Instructions

Follow these steps in order. Estimated assembly time: 15-20 minutes.

Prepare Parts: Lay out all parts and tools. Identify the frame, seat, and backrest.
Attach Backrest: Align the backrest with the holes on the rear of the frame. Insert 4 screws through the backrest into the frame. Tighten with the Allen key until snug.
Attach Seat: Place the seat panel onto the frame, aligning the holes. Insert the remaining 4 screws through the seat into the frame. Tighten securely.
Final Touches: Press the plastic caps onto the screw heads to cover them. Wipe the chair with a dry cloth to remove any dust.
Inspection: Gently rock the chair to ensure it is stable and all connections are secure.

CAUTION! Do not use power tools for assembly, as they may damage the screws or frame.

Specifications

Product Name: SANDSBERG
Article Number: 704.129.60
Frame Material: Powder-coated steel
Seat/Back Material: Particleboard, ABS plastic, or fiberboard (varies by color)
Dimensions (HxWxD): Approximately 33" H x 18" W x 20" D (84cm x 46cm x 51cm)
Seat Height: Approximately 18" (46cm)
Weight Capacity: Max 220 lbs (100 kg)
Color Options: Black, White, Dark Gray (check packaging)
Packaging Weight: Approx. 15 lbs (6.8 kg)

Care & Maintenance

Proper care will extend the life of your chair.

Cleaning: - Frame: Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners. - Seat & Backrest: Wipe with a mild soap solution and soft cloth. Avoid excessive moisture.

Maintenance: - Check screw tightness every 3-6 months and retighten if necessary. - Avoid placing near direct heat sources or in prolonged sunlight to prevent material fading.

CAUTION! Never soak the chair or use harsh chemicals, solvents, or steel wool.

Proper Usage

Designed for indoor residential use.

Sit squarely on the chair, distributing weight evenly.
Do not lean back excessively or tilt the chair on its rear legs.
Use on a level, stable floor surface.
For moving, lift the chair; do not drag it across the floor to protect both the chair legs and your flooring.

Tip: Use felt pads under the legs on hardwood or laminate floors to prevent scratches.

Weight Capacity & Limitations

Maximum Load: 220 lbs (100 kg). This includes the user and any items placed on the seat (e.g., a laptop).

Limitations: - Not designed for commercial, office, or public use. - Not a step stool or ladder. Never stand on the seat or backrest. - Not suitable for outdoor use.

WARNING! Exceeding the weight limit or misuse may cause structural failure, leading to injury or damage.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the packaging or available at www.ikea.com.

Coverage: Warranty covers material and manufacturing defects under normal household use for the specified period.

Not Covered: Damage due to improper assembly, accident, misuse, neglect, commercial use, or unauthorized modification.

For warranty service, contact IKEA customer service with your receipt and article number (704.129.60).

Disposal & Recycling

At end of life, dispose of responsibly.

Steel Frame: Fully recyclable. Take to a local scrap metal recycling facility.

Seat/Back Materials: Check local recycling guidelines for wood/plastic composites.

Packaging: Cardboard and plastic wrapping should be recycled according to your municipal rules.

CAUTION! Disassemble the chair before disposal to facilitate recycling.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Chair wobbles or feels unstable	Loose screws; uneven floor	Tighten all screws with the Allen key. Ensure chair is on a level surface.
Screw won't tighten	Cross-threaded or stripped	Do not force. Remove the screw, realign the parts, and try again. If hole is damaged, contact IKEA for a replacement part.
Plastic caps won't stay on	Screw heads not flush; caps damaged	Ensure screws are fully tightened. If caps are deformed, they may not snap on securely.
Scratches on frame during assembly	Assembly on hard surface	Assemble on a soft cloth or carpet in the future. Minor scratches can be touched up with matching paint.
Material stain on seat/back	Spills not cleaned promptly	Clean immediately with a damp cloth. For stubborn stains, use a mild soap solution. Avoid abrasive pads.

Missing Parts? Contact IKEA customer service with your article number (704.129.60) for replacement parts.

Support: Visit www.ikea.com or contact your local IKEA store.