IKEA SAGSTUA 292.688.66 Footboard instructions manual

The IKEA SAGSTUA 292.688.66 is a bed footboard designed for compatibility with specific IKEA bed frames, featuring a classic slatted design, sturdy construction, and a clean finish. This manual provides essential information for safety, assembly, installation, care, and troubleshooting to ensure proper setup and long-lasting use.

1. Product Overview 2. Safety Information 3. Included Parts & Tools 4. Assembly Instructions 5. Installation to Bed Frame 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Product Overview

The SAGSTUA footboard complements your bed frame, providing aesthetic completion and structural support at the foot of the bed.

Feature	Description
Design	Classic slatted wooden design
Material	Solid wood, particleboard, fiberboard
Finish	White stain, clear acrylic lacquer
Compatibility	Designed for specific IKEA bed frames (check model)
Weight Capacity	Designed as a non-load-bearing decorative and protective panel

Safety Information

Read all instructions before assembly. Keep for future reference.

Assemble on a soft, clean surface to avoid scratches.
Use two people for handling and assembly to prevent injury.
Ensure all screws and connectors are tightened securely.
Check compatibility with your IKEA bed frame before assembly.

WARNING! Do not allow children to play with or climb on the footboard. The footboard is not designed to support weight. Incorrect assembly may lead to instability.

Included Parts & Tools

Check that all parts are included before starting assembly.

Footboard Panel: 1 piece.
Side Support Brackets: 2 pieces (left and right).
Cam Locks and Screws: As per assembly guide illustration.
Mounting Plates/Bolts: For attachment to bed frame.
Allen Key/Hex Key: Provided in package.

Note: Some bed frames may require additional hardware not included with the footboard.

Assembly Instructions

Follow these steps to assemble the footboard components.

Identify all parts using the included illustration guide.
Attach the left and right side support brackets to the back of the main footboard panel using the provided cam locks and screws. Hand-tighten initially.
Using the provided hex key, fully tighten all cam locks by turning clockwise until they click and are flush.
Ensure the footboard assembly is square and all joints are secure.

Tip: Do not overtighten screws, as this may strip the material.

Installation to Bed Frame

Attaching the assembled footboard to your compatible IKEA bed frame.

Position the bed frame foot end in the desired location.
Lift the assembled footboard and align the mounting plates or brackets on the footboard with the corresponding slots or holes on the bed frame.
Insert and hand-tighten the mounting bolts from the footboard into the bed frame.
Fully tighten all bolts using the appropriate tool, ensuring the footboard is firmly attached and does not wobble.
Give the footboard a gentle shake to test stability.

CAUTION! The bed frame must be on a level, stable surface. Installation requires two people to safely lift and align the footboard.

Care & Maintenance

To maintain appearance and longevity.

Wipe clean with a soft, slightly damp cloth.
Dry immediately with a soft, dry cloth.
Do not use abrasive cleaners, scouring pads, or harsh chemicals.
Avoid excessive moisture and direct heat sources.

CAUTION! Never soak or pour liquids directly onto the footboard.

Specifications

Article Number: 292.688.66
Product Name: SAGSTUA
Type: Bed Footboard
Main Material: Solid wood, Particleboard, Fiberboard
Finish: White stain, Clear acrylic lacquer
Package Dimensions & Weight: Refer to product packaging.
Country of Origin: To be specified on packaging.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Footboard wobbles	Loose connections	Check and tighten all cam locks and mounting bolts.
Does not fit bed frame	Incompatible model	Verify bed frame model is compatible with SAGSTUA footboard.
Scratches on surface	Improper handling	Assemble on a soft blanket. Minor scratches can be touched up with matching paint.
Parts missing	Packaging error	Contact IKEA customer support with your article number and receipt.
Cam lock won't tighten	Cross-threaded or misaligned	Disassemble the step, realign parts, and try again. Do not force.

Warranty & Support

This product is covered by IKEA's limited warranty. For detailed terms, visit www.ikea.com.

Need Help? Visit the IKEA website for assembly guides or contact your local IKEA store:

Website: www.ikea.com
Customer Support: Find contact details for your region on the website.
Always have your article number (292.688.66) and receipt ready when contacting support.