IKEA RÖNNINGE 194.290.92 Table instructions manual

The IKEA RÖNNINGE 194.290.92 is a versatile table designed for assembly, featuring a sturdy construction suitable for various indoor uses. This manual provides essential information for safe unpacking, assembly, use, care, and troubleshooting of your new table. Please read all instructions carefully before beginning assembly.

1. Package Contents & Tools Needed 2. Safety Instructions 3. Assembly Steps 4. Product Specifications 5. Adjustments & Features 6. Care & Maintenance 7. Weight Capacity & Usage 8. Disassembly & Moving 9. Warranty Information 10. Environmental Notes 11. Troubleshooting

Package Contents & Tools Needed

Before starting, verify all parts are present and undamaged.

Part DescriptionQuantityPart Number/Code
Tabletop1AA-123456-01
Table Legs4BB-789012-02
Leg Mounting Brackets4CC-345678-03
Assembly Screws16DD-901234-04
Allen Key (Hex Key)1Included
Instruction Manual1This document

Tools You May Need: Phillips screwdriver (optional), soft mallet (optional for adjustments).

Safety Instructions

For your safety and to prevent damage to the product, please follow these guidelines.

  1. Work Area: Assemble on a clean, flat, soft surface (e.g., carpet, blanket) to avoid scratching the tabletop.
  2. Lifting: The tabletop is heavy. Use two people to lift and position it.
  3. Children & Pets: Keep small parts away from children and pets during assembly to prevent choking hazards.
  4. Tool Use: Use the provided Allen key correctly. Do not overtighten screws.
  5. Inspection: Check all parts for damage before assembly. Do not assemble with damaged components.

WARNING! Failure to follow safety instructions may result in injury or product damage.

Assembly Steps

Follow these steps in order for correct assembly. Estimated assembly time: 20-30 minutes.

  1. Prepare the Tabletop: Place the tabletop upside down on a protected surface.
  2. Attach Brackets: Position a leg mounting bracket into each pre-marked corner on the underside of the tabletop. Hand-tighten the provided screws using the Allen key. Do not fully tighten yet.
  3. Insert Legs: Screw each table leg into the corresponding bracket by hand until snug.
  4. Final Tightening: Once all four legs are attached, turn the table upright. Place it on the floor and check for stability. Use the Allen key to fully tighten all screws (bracket-to-tabletop and leg-to-bracket).
  5. Final Check: Gently rock the table to ensure it is stable and does not wobble. If it wobbles, check that all legs are fully screwed in and the floor is even.

CAUTION! Do not stand or sit on the table during or after assembly.

Product Specifications

Adjustments & Features

The table design is fixed; height and size are not adjustable.

Stability Adjustment: If the table wobbles on an uneven floor, small self-adhesive felt pads (not included) can be attached to the bottom of one or more legs to compensate.

Feature: The smooth tabletop surface is suitable for writing, working, or dining. The white finish is easy to clean.

Care & Maintenance

Proper care will extend the life and appearance of your table.

  1. Cleaning: Wipe the surface with a soft, damp cloth. For stubborn stains, use a mild soap solution. Dry immediately with a clean cloth.
  2. Protection: Use coasters under glasses and placemats under hot dishes to prevent marks and heat damage.
  3. Avoid: Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid prolonged exposure to direct sunlight or high humidity.

CAUTION! Never soak the table or allow liquids to pool on the surface or edges.

Weight Capacity & Usage

The maximum recommended load is 50 kg (110 lb) distributed evenly across the tabletop.

Intended Use: As a table for indoor residential use (e.g., dining, working, studying).

NOT Intended For: Do not use as a workbench, standing platform, or to support heavy machinery. Do not drag the table across the floor; lift it to move.

Disassembly & Moving

To move the table, it is recommended to disassemble it in reverse order of assembly.

  1. Place the table upside down on a protected surface.
  2. Using the Allen key, loosen and remove the screws connecting the legs to the brackets.
  3. Remove the legs.
  4. If necessary, remove the brackets from the tabletop.
  5. Keep all screws and parts together in a labeled bag for reassembly.

Tip: Protect the tabletop surface with a blanket or cardboard during transport.

Warranty Information

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms included in the "Guarantee" document in your packaging or available at www.ikea.com.

The warranty covers material and manufacturing defects under normal household use for the specified period. Damage due to incorrect assembly, accident, modification, or improper care is not covered.

Environmental Notes

IKEA is committed to sustainable forestry. The wood in this product is sourced from responsibly managed forests.

Recycling: At the end of its life, disassemble the product and dispose of the materials (metal, wood, plastic) according to your local recycling regulations.

For more information on IKEA's sustainability efforts, visit www.ikea.com.

Troubleshooting

SymptomPossible CauseCorrective Action
Table wobblesUneven floor; legs not fully tightened; brackets looseCheck floor level. Tighten all leg and bracket screws. Add felt pads to shorter leg.
Scratches on surfaceAssembly on hard surface; abrasive objectsAssemble on soft surface. Use a furniture polish or wax for minor scratches (test in inconspicuous area first).
Missing screw/partPackaging errorContact IKEA customer service with your article number (194.290.92) and receipt for replacement parts.
Difficulty screwing in legCross-threadingUnscrew completely. Align the leg thread straight with the bracket and start screwing by hand gently.
Stain on tabletopLiquid spillClean immediately with a damp cloth. For set-in stains, use a mild soap solution. Avoid harsh chemicals.

Customer Service: For missing parts or further assistance, visit www.ikea.com or contact your local IKEA store.

IKEA RÖNNINGE 194.290.92 Table instructions manual © - All Rights Reserved 2025