IKEA RÅVAROR 404.545.22 Table instructions manual

The IKEA RÅVAROR 404.545.22 is a modern, sturdy table designed for everyday use. Constructed from durable materials, it features a clean Scandinavian design, easy assembly, and a stable structure suitable for dining, working, or as a side table. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Specifications 5. Care & Maintenance 6. Warranty & Support 7. Troubleshooting

Parts & Hardware

Before assembly, verify all parts are present. Key components: Tabletop, Legs (4 pieces), Support Brackets, Screws, Allen Key.

Part Name	Quantity	Description
Tabletop	1	Main surface, pre-drilled holes
Table Leg	4	Adjustable or fixed legs
Support Bracket	4	Metal brackets for leg attachment
Screw Pack A	8	For attaching legs to brackets
Screw Pack B	16	For attaching brackets to tabletop
Allen Key	1	Tool for tightening screws
Protective Felt Pads	4	For floor protection

Safety Information

Read all instructions before assembly. Ensure a safe workspace.

Assembly requires two people for safety and ease.
Keep small parts away from children to avoid choking hazards.
Assemble on a soft surface (e.g., carpet) to prevent scratches.
Do not overtighten screws; this may damage the material.
Check all connections are secure before use.

WARNING! Table is heavy; lift with care to avoid injury. Ensure the table is on a level, stable surface.

Assembly Instructions

Follow steps in order. Estimated assembly time: 30-45 minutes.

Prepare: Unpack all parts. Identify each component using the parts list.
Attach Brackets to Tabletop: Place tabletop upside down on a soft surface. Align a support bracket with the pre-drilled holes at each corner. Secure using 4 screws from Pack B per bracket. Repeat for all four corners.
Attach Legs: Insert a table leg into each bracket. Align the holes and secure using 2 screws from Pack A per leg. Tighten firmly but do not overtighten.
Flip and Level: With assistance, carefully flip the table upright. Place on the floor.
Adjust and Secure: If legs are adjustable, adjust to desired height and lock. Ensure all legs touch the floor evenly.
Apply Felt Pads: Peel backing from protective felt pads and apply one to the bottom of each leg.

Tip: Use the provided Allen key for all screw tightening. Keep the manual for future reference.

Specifications

Product Name: RÅVAROR Table
Article Number: 404.545.22
Dimensions (L x W x H): 120 cm x 80 cm x 75 cm (47 ¼" x 31 ½" x 29 ½")
Tabletop Material: Particleboard, Ash veneer, Clear acrylic lacquer
Leg Material: Steel, Epoxy/polyester powder coating
Frame Material: Steel, Epoxy/polyester powder coating
Max. Load: 50 kg (110 lbs) evenly distributed
Weight: 18.5 kg (40.8 lbs)
Designer: IKEA of Sweden

Care & Maintenance

Proper care ensures longevity and maintains appearance.

Cleaning: Wipe surface with a damp, soft cloth. Dry immediately. For stubborn stains, use a mild soap solution. Do not use abrasive cleaners, scouring pads, or solvents.
Protection: Use coasters under glasses and hot pads under hot dishes to prevent marks and heat damage.
Maintenance: Periodically check and tighten screws if the table becomes wobbly. Reapply felt pads if they wear out.
Environment: Avoid placing in direct sunlight or near heat sources to prevent fading or warping.

CAUTION! Do not sit or stand on the table. It is not designed to support a person's weight.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms for details.

Warranty Period: As per IKEA's commercial warranty policy.
Coverage: Covers material and manufacturing defects under normal household use.
Support: For missing parts, assembly questions, or warranty claims, contact IKEA customer service.
Contact: Visit www.ikea.com or your local IKEA store. Keep your receipt as proof of purchase.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Table is wobbly	Legs not tightened evenly; floor uneven	Check all screws are tight. Adjust leg height if adjustable. Use shims under leg if floor is uneven.
Scratches on surface during assembly	Assembled on hard surface	Always assemble on a soft, protective surface like a blanket or carpet.
Missing screw or part	Part not included or lost	Contact IKEA customer service with article number (404.545.22) for replacement parts.
Leg does not fit into bracket	Wrong leg or bracket orientation	Ensure you are using the correct leg for each corner. Check orientation matches diagram.
Surface stain	Liquid spill not cleaned promptly	Clean immediately with a damp cloth. For set-in stains, use a mild soap solution. Avoid harsh chemicals.

Reassembly: If moving, disassemble in reverse order and keep all parts together.

Service: For further assistance, visit www.ikea.com or call your local IKEA store.