IKEA RUDSTA 604.348.25 Cabinet instructions manual

The IKEA RUDSTA 604.348.25 is a versatile glass-door cabinet designed for living room, hallway, or office storage. It features a metal frame, tempered glass doors and shelves, adjustable feet for leveling, and a clean, modern design. Below are key sections for safety, parts list, assembly, installation, use, care, and troubleshooting.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Installation & Leveling 5. Specifications 6. Using Your Cabinet 7. Care & Maintenance 8. Warranty Information 9. Troubleshooting

Parts & Hardware

Check that you have all parts before starting assembly. Contact IKEA if any parts are missing.

Part Number	Description	Quantity
100001	Cabinet frame side panel (left)	1
100002	Cabinet frame side panel (right)	1
100003	Top panel	1
100004	Bottom panel	1
100005	Back panel	1
100006	Tempered glass door	2
100007	Adjustable glass shelf	2
200001	Cam lock screw	8
200002	Cam lock	8
200003	Door hinge	4
200004	Adjustable foot	4
200005	Screw for hinge	16
200006	Door handle	2
300001	Assembly tool (Allen key)	1

Safety Instructions

Read all instructions before assembly. Keep children and pets away during assembly.

Stability warning: To prevent tip-over, secure cabinet to wall using provided wall attachment device (not included, sold separately).
Lifting: Cabinet is heavy; use two people for lifting and moving.
Glass parts: Handle glass doors and shelves with care. Do not overtighten screws near glass.
Tools: Use correct tools. Do not use power tools on cam locks.
Surface: Assemble on soft, clean surface to avoid scratches.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure to wall.

Assembly Steps

Follow steps in order. Allow 45-60 minutes for assembly.

Step 1: Attach adjustable feet to bottom panel using screws.
Step 2: Connect side panels to bottom panel using cam locks and screws. Do not fully tighten yet.
Step 3: Attach top panel to side panels using cam locks. Ensure all corners are square.
Step 4: Tighten all cam locks with Allen key until firm (do not overtighten).
Step 5: Insert back panel into grooves and secure with provided screws.
Step 6: Attach door hinges to side panels using screws. Hang glass doors on hinges.
Step 7: Adjust door alignment by loosening hinge screws, positioning door evenly, then retightening.
Step 8: Place glass shelves on support pins inside cabinet at desired height.
Step 9: Attach door handles to glass doors using screws from inside.

Tip: Keep screws organized. Check alignment after each step.

Installation & Leveling

After assembly, move cabinet to desired location.

Wall attachment: Use IKEA wall attachment device (sold separately) to secure top of cabinet to wall stud.
Leveling: Turn adjustable feet clockwise to raise, counterclockwise to lower. Use spirit level on top surface.
Final check: Ensure doors open and close smoothly without rubbing. Adjust hinges if needed.

CAUTION! Do not place on uneven or wet surfaces. Keep away from direct heat sources.

Specifications

Article Number: 604.348.25
Dimensions: Width: 35 3/8" (90 cm), Height: 68 7/8" (175 cm), Depth: 15 3/4" (40 cm)
Weight: 55 lbs (25 kg)
Material: Frame: Steel, epoxy/polyester powder coating. Doors/Shelves: Tempered glass. Back panel: Fiberboard.
Color: Black-brown/clear glass
Max load per shelf: 22 lbs (10 kg)
Adjustable shelf positions: 5 per side
Door swing: 180 degrees
Warranty: 10-year limited warranty (see warranty card)

Using Your Cabinet

Designed for display and storage of books, decorative items, media, etc.

Loading shelves: Distribute weight evenly. Do not exceed 22 lbs per shelf.
Door operation: Open and close gently. Do not slam doors.
Adjusting shelves: Lift shelf up and out to remove. Reposition support pins to desired height.
Locking (optional): For added security, install cam lock in pre-drilled hole on door edge (lock not included).

Note: Not recommended for storing heavy electronics or as a TV stand unless verified for weight.

Care & Maintenance

Regular care will maintain appearance and function.

Metal frame: Wipe with soft, damp cloth. Dry immediately. Do not use abrasive cleaners.
Glass: Clean with glass cleaner and soft cloth. Avoid ammonia-based cleaners on frame.
Hardware: Check hinge screws and cam locks annually; tighten if loose.
Moving: Empty cabinet before moving. Remove doors and shelves if possible.

CAUTION! Do not use steel wool or scouring pads. Do not expose to excessive moisture.

Warranty Information

IKEA warrants this product against manufacturing defects for 10 years from original date of purchase. Warranty covers functional defects only, not normal wear, accidental damage, or improper assembly. Proof of purchase required. For warranty service, contact IKEA customer service in your country or visit www.IKEA.com.

Troubleshooting

Issue	Possible Cause	Solution
Doors not aligned	Hinges loose or misadjusted	Loosen hinge screws, align door, retighten. Check that cabinet is level.
Cabinet wobbles	Uneven floor or feet not adjusted	Adjust feet until stable. Use level on top surface.
Shelf does not sit level	Support pins not at same height	Ensure pins are inserted at matching positions on both sides.
Scratches on frame during assembly	Assembly on hard surface	Assemble on carpet or cardboard. Minor scratches can be touched up with matching paint.
Difficulty turning cam locks	Cross-threaded or overtightened	Back screw out slightly, realign cam lock, then turn gently until snug.
Glass door feels loose	Hinge screws loose	Tighten screws connecting hinge to door and frame. Do not overtighten.

Missing parts? Contact IKEA customer service with article number (604.348.25) and part numbers.

Support: Visit www.IKEA.com or call your local IKEA store.