IKEA RUDSTA 504.501.37 Cabinet instructions manual

The IKEA RUDSTA (Article Number 504.501.37) is a freestanding glass-door cabinet designed for storage and display. It features a metal frame, glass doors and shelves, adjustable feet for leveling, and a minimalist design suitable for living rooms, offices, or hallways. This manual covers safety warnings, parts identification, step-by-step assembly, care instructions, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Leveling & Placement 5. Care & Maintenance 6. Technical Specifications 7. Warranty & Support 8. Troubleshooting

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part Name	Quantity	Description/Article Number
Cabinet Frame (Side Panels)	2	Metal side panels with pre-drilled holes
Top Panel	1	Metal top section
Bottom Panel	1	Metal base with adjustable foot holes
Back Panel	1	Fiberboard backboard
Glass Doors	2	Tempered glass doors with hinges
Glass Shelves	2	Tempered glass shelves (adjustable)
Door Handles	2	Metal handles
Adjustable Feet	4	Plastic feet with leveling screws
Screws & Bolts	1 set	Including cam locks, screws, dowels
Assembly Tool	1	Hex key (Allen wrench) provided

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

Stability Warning: To prevent tipping, secure cabinet to wall using provided wall attachment device (not included with all models; check package).
Lifting: Cabinet is heavy; use two people for lifting and assembly.
Glass Handling: Glass doors and shelves are fragile. Handle with care; avoid impacts on edges.
Tool Use: Use only provided tools or appropriate screwdrivers. Do not overtighten.
Placement: Place on a flat, stable surface. Use adjustable feet to level on uneven floors.

WARNING! Serious or fatal crushing injuries can occur from furniture tip-over. Always secure furniture to wall.

Assembly Instructions

Follow steps in order. Allow approximately 60-90 minutes for assembly.

Prepare Workspace: Lay out all parts on a clean, soft surface (e.g., carpet or blanket) to avoid scratches.
Attach Feet: Screw the four adjustable feet into the bottom panel. Do not fully tighten until leveling later.
Assemble Frame: Connect side panels to top and bottom panels using cam locks and dowels as shown in diagram. Tighten with hex key.
Install Back Panel: Slide fiberboard back into grooves on frame. Secure with provided screws.
Mount Shelves: Insert shelf pins at desired heights. Gently place glass shelves onto pins.
Attach Doors: Mount hinges to side panels. Hang glass doors. Adjust door alignment if necessary using hex key on hinge screws.
Attach Handles: Screw handles onto doors as per design preference (left/right).
Final Check: Ensure all screws and cam locks are tight. Check that doors open and close smoothly.

Tip: Keep assembly instructions for future reference (e.g., moving or disassembly).

Leveling & Placement

Proper leveling ensures stability and prevents door misalignment.

Place cabinet in its desired location.
Use a spirit level on top surface.
Adjust each foot by turning clockwise to raise, counter-clockwise to lower.
Re-check level after adjusting each foot.
Tighten lock nuts (if present) to secure feet.
Wall Attachment: If included, attach anti-tip bracket to wall stud and cabinet back per instructions.

CAUTION! Do not place on uneven or wet surfaces. Keep away from direct heat sources.

Care & Maintenance

Metal Frame: Wipe with a soft, damp cloth. Dry immediately. Do not use abrasive cleaners.
Glass: Clean with glass cleaner or mild soapy water. Use soft cloth to avoid streaks.
Avoid: Harsh chemicals, ammonia-based cleaners on metal, and excessive moisture.
Weight Limit: Do not exceed 33 lbs (15 kg) per glass shelf. Distribute weight evenly.

Note: Periodically check tightness of screws and leveling feet.

Technical Specifications

Article Number: 504.501.37
Dimensions (W x H x D): 35 3/8" x 64 1/2" x 15 3/4" (90 x 164 x 40 cm)
Weight: 55 lbs (25 kg) approx.
Material: Frame: Steel, Epoxy/polyester powder coating. Doors/Shelves: Tempered glass. Back panel: Fiberboard.
Color: Black-brown/Glass (as per product name)
Max Load per Shelf: 33 lbs (15 kg)
Adjustable Shelf Positions: 4 positions per side
Door Swing: 180-degree hinge opening
Required Tools: Hex key (provided), Phillips screwdriver (optional), level.

Warranty & Support

IKEA limited warranty applies. See IKEA warranty booklet for details.

Warranty Period: Varies by country. Typically 10 years for frame, 1 year for moving parts (hinges).

Support: For missing parts, assembly help, or returns:

Visit your local IKEA store.
Contact IKEA Customer Support: 1-888-888-4532 (US).
Online: www.ikea.com, use article number 504.501.37.

Important: Retain your receipt as proof of purchase.

Troubleshooting

Issue	Possible Cause	Solution
Doors not closing evenly	Frame not level; hinges misaligned	Re-level cabinet using adjustable feet. Adjust hinge screws with hex key.
Shelves wobbling	Shelf pins not fully inserted; uneven weight	Ensure pins are securely in holes. Distribute weight evenly on shelf.
Cabinet rocks	Uneven floor; feet not adjusted	Adjust individual feet until stable. Place on a flat board if floor is very uneven.
Screws won't tighten	Stripped thread; wrong screw used	Do not force. Check that you are using the correct screw from the set. If thread is damaged, contact IKEA for replacement part.
Glass door squeaks	Hinges need lubrication	Apply a small amount of dry lubricant (e.g., Teflon spray) to hinge pivot points. Do not use oil.
Back panel loose	Screws not tightened	Secure all back panel screws firmly.

Safety Reminder: If cabinet feels unstable after assembly, disassemble and restart from step 1, ensuring all connections are correct and tight.

Disposal: At end of life, disassemble and recycle materials according to local regulations. Glass must be handled as special waste.