IKEA ROSSARED 805.070.43 Mirror instructions manual

The IKEA ROSSARED 805.070.43 is a wall-mounted mirror designed for bathroom or hallway use. It features a rectangular shape with a polished chrome frame, safety backing, and pre-installed mounting hardware. Below are key sections for safety, features, installation, setup, care, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing DVD Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Rectangular mirror with polished chrome frame, safety backing, mounting brackets, wall anchors, screws.

Feature	Description
Frame	Polished chrome, rectangular design
Mirror surface	High-quality glass with clear reflection
Safety backing	Protective film to prevent shattering
Mounting brackets	Pre-installed on frame for wall attachment
Wall anchors & screws	Included for secure installation on various wall types
Dimensions	As per specifications (see below)
Weight	Lightweight for easy handling
Intended use	Bathroom, hallway, bedroom (dry areas)

Installation

Unpack and inspect contents. Ensure wall is suitable for mounting.

Locate wall studs: Use stud finder for secure mounting (recommended).
Mark bracket positions: Hold mirror against wall, mark screw holes with pencil.
Drill pilot holes: Use appropriate drill bit for wall type (drywall, tile, etc.).
Install wall anchors: If not drilling into studs, insert provided wall anchors.
Attach mirror: Align brackets with holes, insert screws, tighten securely.
Check level: Use spirit level to ensure mirror is straight.

WARNING! Mirror is fragile; handle with care to avoid breakage. Use appropriate safety gear during installation.

First-Time Setup

After installation, perform final checks.

Remove protective film: Peel off safety backing film from mirror surface.
Clean surface: Use soft, lint-free cloth to wipe mirror (see Care section).
Verify stability: Gently test mirror to ensure it is securely mounted.
Adjust positioning: Ensure mirror is at desired height and angle.

CAUTION! Do not remove protective film until installation is complete to avoid scratches.

Specifications

Model: ROSSARED 805.070.43
Dimensions: 60cm x 80cm (width x height)
Frame Material: Polished chrome metal
Mirror Type: Float glass with silvering
Weight: Approximately 5 kg
Mounting: Wall-mounted (horizontal or vertical)
Included Hardware: Brackets, screws, wall anchors
Safety Standards: Complies with relevant glass safety regulations

Controls and Settings

This mirror has no electronic controls. Adjustments are physical during installation.

Installation Adjustments: Brackets allow for slight leveling adjustments after mounting. Use screwdriver to loosen/tighten as needed.

Orientation: Can be mounted horizontally (landscape) or vertically (portrait) based on bracket alignment.

Connecting Devices

Not applicable. This is a passive mirror with no electronic connections.

Note: For illuminated mirror variants, refer to separate electrical installation guide.

Playing DVD Media

Not applicable. This mirror does not play media.

Accessibility Features

Not applicable. This mirror has no accessibility features.

Care & Cleaning

Use appropriate cleaners to maintain mirror surface.

Use soft cloth: Microfiber or lint-free cloth recommended.
Apply cleaner sparingly: Use glass cleaner or mild soap solution. Avoid abrasive chemicals.
Wipe gently: Clean in circular motions; dry with separate cloth to prevent streaks.
Avoid frame contact: Do not use harsh cleaners on chrome frame to prevent corrosion.

CAUTION! Do not use ammonia-based cleaners on frame. Avoid excessive moisture on edges.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mirror not level	Uneven mounting	Loosen brackets, adjust level, retighten.
Frame scratches	Improper handling/cleaning	Use soft cloth; avoid abrasive materials.
Mirror appears blurry	Dirt/film on surface	Clean with appropriate glass cleaner (see Care).
Mounting feels loose	Insufficient wall anchor/screw tightness	Ensure screws are tight; use larger anchors if needed.
Protective film hard to remove	Film adhered strongly	Use hairdryer on low heat to soften adhesive, then peel slowly.

Replacement: If mirror is damaged, contact IKEA for replacement parts.

Service: Visit www.ikea.com or local store for assistance.