IKEA RODULF 404.973.76 Underframe instructions manual

The IKEA RODULF 404.973.76 Underframe is a sturdy metal bed frame base designed to support IKEA mattresses and bed slats. It features a minimalist design, adjustable legs for height customization, and a robust construction for long-lasting durability. Below are key sections for safety, assembly, installation, usage, care, and troubleshooting.

Features at a Glance

Key components: Steel frame construction, adjustable plastic feet, pre-drilled holes for easy assembly, and a powder-coated finish.

Package Contents

Unpack and verify all parts before assembly.

1. Main frame sections (2 long sides, 2 short sides).
2. Adjustable plastic feet (4 or 6 pieces as per model).
3. Connector brackets and screws.
4. Assembly tool (if included) or required Allen key.
5. Instruction manual.

WARNING! Check for missing parts before discarding packaging. Contact IKEA if anything is missing.

Safety Information

Read all instructions before assembly and use.

1. Assemble on a soft surface to avoid scratching floors or parts.
2. Ensure all screws and connectors are tightened securely.
3. Use only on flat, stable surfaces; adjust feet for leveling.
4. Do not exceed the maximum weight limit specified.
5. Keep small children away during assembly due to small parts.

CAUTION! The frame is heavy; use two people for handling and assembly.

Assembly Instructions

1. Lay out all parts in the assembly area.
2. Connect the long and short frame sections using provided brackets.
3. Hand-tighten screws initially, then fully tighten with the tool.
4. Attach adjustable feet to the bottom corners of the frame.
5. Flip the assembled frame upright carefully.
6. Place the frame in the desired location.
7. Install compatible bed slats according to slat instructions.
8. Place mattress on top of slats.

Tip: Do not overtighten screws to avoid stripping threads.

Installation & Leveling

Ensure proper placement and stability.

1. Position the frame in the room, allowing space on all sides.
2. Adjust the plastic feet by twisting to compensate for uneven floors.
3. Use a level to check that the frame is even.
4. Ensure all feet are in contact with the floor to prevent wobbling.
5. Re-tighten all connections after initial use as settling may occur.

WARNING! An unlevel frame can cause instability and potential damage.

Specifications

• Model Number: RODULF 404.973.76
• Material: Steel, Plastic (feet)
• Finish: Powder-coated
• Color Options: Black, White (as per purchase)
• Dimensions: Varies by bed size (Single, Double, Queen, King)
• Weight Capacity: Refer to packaging or IKEA website for specific limits
• Warranty: Limited warranty as per IKEA terms

Compatible Components

Designed to work with IKEA ecosystem.

• Bed Slats: LURÖY, LÖNSET, or similar IKEA slat sets.
• Mattresses: Most IKEA mattresses of corresponding size.
• Bed Headboards/Footboards: Compatible with IKEA bed frames if attachment points match.

Note: Using non-IKEA components may affect stability and warranty.

Care & Maintenance

Regular care ensures longevity.

1. Wipe frame with a dry or slightly damp cloth.
2. Avoid abrasive cleaners or solvents that may damage the finish.
3. Periodically check and tighten screws and connectors.
4. Inspect feet for wear and replace if damaged.

CAUTION! Do not use steam cleaners or excessive water.

Warranty Information

IKEA provides a limited warranty for this product. Warranty details are available on the IKEA website or from the store of purchase. Retain your receipt as proof of purchase. Warranty covers manufacturing defects under normal household use.

Troubleshooting

Support: For missing parts or assembly help, contact IKEA customer service or visit www.ikea.com.