IKEA RIMFORSA 603.994.12 Working Bench instructions manual

The IKEA RIMFORSA 603.994.12 is a sturdy and versatile working bench designed for home workshops, garages, and DIY projects. It features a solid wood top, adjustable height, integrated storage options, and a robust steel frame. Below are key sections for safety, assembly, features, usage, maintenance, and troubleshooting.

Features at a Glance

Key components: Solid beech wood worktop, Powder-coated steel frame, Height adjustment mechanism, Integrated tool holder, Lower storage shelf, Vise mounting points.

Safety Instructions

Read all instructions before assembly and use. Ensure safe handling and operation.

1. Assembly: Use on a clean, flat surface. Two people recommended for assembly.
2. Weight Limits: Do not exceed specified weight limits on worktop or shelf.
3. Stability: Ensure all bolts are tightened and leg levelers adjusted before use.
4. Vise Use: Secure vise properly; ensure workpiece is clamped securely.
5. Personal Protection: Wear safety glasses and appropriate gloves when working.

WARNING! Heavy components; lift with care to avoid injury. Keep children away during assembly. Do not stand or sit on the workbench.

Assembly Instructions

Unpack all parts and check against the included parts list. Allow 60-90 minutes for assembly.

1. Prepare Frame: Connect the two side frames using the cross braces.
2. Attach Leg Levelers: Screw adjustable feet into the bottom of each leg.
3. Install Shelf: Place the lower storage shelf onto the support brackets and secure.
4. Mount Worktop: Position the wooden worktop onto the frame, align with pre-drilled holes.
5. Secure Worktop: Use the provided bolts and Allen key to fasten worktop to frame.
6. Attach Tool Holder: Slide the tool holder into the groove at the back of the worktop.
7. Final Check: Tighten all bolts, adjust leg levelers for stability on floor.

Tip: Do not fully tighten bolts until all parts are aligned. Use a soft mallet if needed to adjust fit.

Specifications

• Model: RIMFORSA 603.994.12
• Overall Dimensions: 120cm L x 60cm W x 85-95cm H
• Worktop Thickness: 28mm (1.1") solid beech
• Frame Material: Powder-coated steel, black
• Adjustable Height Range: 85cm - 95cm (33.5" - 37.4")
• Weight Capacity (Worktop): 100kg (220 lbs)
• Weight Capacity (Shelf): 25kg (55 lbs)
• Net Weight: 28kg (61.7 lbs)
• Package Includes: All frame parts, worktop, shelf, tool holder, hardware, Allen key, assembly instructions
• Recommended Tools for Vise: Drill, wrench (vise not included)

Adjustments and Settings

Height Adjustment: Loosen the four locking knobs under the worktop (one on each leg), adjust to desired height, re-tighten knobs securely.

Leg Levelers: Turn feet clockwise to raise, counter-clockwise to lower. Ensure all four feet contact the floor firmly.

Vise Mounting: Use the pre-drilled holes on the front left corner of worktop. Follow vise manufacturer's instructions for installation.

Tool Holder: The rear groove accepts standard bench tool holders or can be used to rest tools directly.

Using the Workbench

Designed for woodworking, DIY repairs, crafting, and general workshop tasks.

1. Prepare Surface: Ensure worktop is clean and dry before use.
2. Secure Workpiece: Use clamps or vise to hold materials firmly.
3. Height Setting: Adjust to a comfortable working height to reduce back strain.
4. Tool Access: Keep frequently used tools in the rear holder or on the lower shelf.
5. Even Loading: Distribute weight evenly across worktop; avoid concentrated heavy loads.

Tip: Use a protective mat or sacrificial board on the worktop for messy projects to preserve the wood surface.

Storage and Organization

Maximize workspace efficiency with organized storage.

1. Lower Shelf: Ideal for toolboxes, power tools, or storage bins.
2. Tool Holder: Holds chisels, screwdrivers, pencils, rulers within easy reach.
3. Wall Accessories: Consider adding IKEA SKÅDIS pegboard to the wall above for additional tool storage.
4. Under-Bench: Space between shelf and floor can store larger items like lumber or containers.

CAUTION! Do not overload the shelf beyond 25kg. Place heavier items directly on the floor if needed.

Care & Maintenance

Regular care will extend the life and appearance of your workbench.

1. Wood Top: Clean with a damp cloth; dry immediately. Re-oil with mineral oil or beeswax every 6-12 months.
2. Steel Frame: Wipe with dry or slightly damp cloth. Avoid abrasive cleaners.
3. Bolts and Joints: Periodically check and tighten any loose bolts or knobs.
4. Leg Levelers: Clean threads if they become difficult to adjust.

WARNING! Do not use harsh chemicals, ammonia, or silicone-based polishes. Avoid prolonged exposure to direct sunlight or moisture.

Warranty Information

IKEA Limited Warranty: This product is covered by IKEA's standard limited warranty. Refer to the IKEA warranty document included in the packaging or visit www.ikea.com for details specific to your country. Warranty covers material and manufacturing defects under normal household use. Proof of purchase is required.

For service or spare parts, contact your local IKEA store or visit www.ikea.com. Model number: 603.994.12.

Troubleshooting

Missing Parts? Contact IKEA customer service with model number and part description.

Support: Visit www.ikea.com or your local IKEA store.