IKEA RENGJORD 905.045.72 Dishwasher instructions manual

The IKEA RENGJORD 905.045.72 is a built-in dishwasher designed for efficient cleaning with multiple wash programs, energy-saving features, adjustable racks, and child safety lock. It operates on standard household power and water connections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Utilities 7. Operating Programs 8. Loading and Unloading 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Control panel with digital display, adjustable upper and lower racks, cutlery basket, detergent dispenser, rinse aid dispenser, water inlet and drain connections.

FeatureDescription
Control PanelDigital display with program selection buttons
Wash ProgramsEco, Intensive, Quick, Glass, Auto
Adjustable RacksUpper rack height adjustable for tall items
Cutlery BasketRemovable basket with separate compartments
Detergent DispenserTwo compartments for pre-wash and main wash
Rinse Aid DispenserAdjustable dosage for spot-free drying
Child LockPrevents accidental program changes
Delay StartProgram start delay up to 24 hours
Water SoftenerBuilt-in system for hard water areas
Energy RatingA++ energy efficiency class

Installation

Unpack and inspect contents. Ensure installation space meets requirements.

  1. Position dishwasher: Place in prepared cabinet opening, ensure level.
  2. Connect water supply: Attach inlet hose to cold water connection (max pressure 1 MPa).
  3. Connect drain hose: Route to sink drain or garbage disposal, avoid kinks.
  4. Electrical connection: Plug into grounded 220-240V, 50Hz outlet.
  5. Secure to cabinet: Use mounting brackets to fix dishwasher to countertop.

WARNING! Installation must be performed by qualified personnel. Ensure water and electrical connections are secure before use.

First-Time Setup

After installation, prepare dishwasher for first use.

  1. Remove shipping materials: Take out all interior packaging and transit bolts.
  2. Run initial cycle: Add detergent, select Intensive program, run empty to clean interior.
  3. Set water hardness: Adjust water softener according to local water hardness.
  4. Fill rinse aid: Open dispenser, fill to MAX line, set dosage level (3-5 recommended).
  5. Set language: Press and hold Program button for 5 seconds to select display language.

CAUTION! Do not use dishwasher without removing transit bolts. Ensure interior is clean before loading dishes.

Specifications

Controls and Settings

Control panel includes: Power button, Program selection, Start/Pause, Delay, Child lock, Rinse aid indicator.

Program Selection: Press Program button to cycle through options. LED indicates selected program.

Settings Menu: Hold Program + Start for 3 seconds to access: Water hardness (H1-H5), Rinse aid level (1-6), Buzzer volume (On/Off), Reset to factory defaults.

Indicator Lights: Power (green), Program running (flashing), Rinse aid low (red), Salt low (red).

Connecting Utilities

Proper utility connections ensure optimal performance.

  1. Water connection: Use only cold water connection. Install shut-off valve for maintenance.
  2. Drain connection: Minimum height 40 cm, maximum length 150 cm from dishwasher.
  3. Electrical: Dedicated circuit recommended. Do not use extension cords.
  4. Water softener: Regenerate when salt indicator lights (approximately every 20 cycles).

Tip: Check all connections for leaks before regular use. Run first cycle and inspect connections.

Operating Programs

Select program based on load type and soil level.

  1. Eco: Energy-saving program for normally soiled dishes (2.5 hours).
  2. Intensive: For heavily soiled pots and pans (70°C, 3 hours).
  3. Quick: For lightly soiled dishes (58°C, 30 minutes).
  4. Glass: Gentle wash for crystal and delicate glassware (45°C, 1.5 hours).
  5. Auto: Automatically adjusts time and temperature based on soil sensors.
  6. Half-load: Uses less water and energy when loading only one rack.
  7. Delay start: Set program to start later (1-24 hours delay).

WARNING! Do not open door during operation. Steam may cause burns. Wait for program completion beep.

Loading and Unloading

Proper loading ensures optimal cleaning results.

  1. Scrape off large food particles before loading.
  2. Lower rack: Pots, pans, plates, cutting boards. Adjustable for tall items.
  3. Upper rack: Glasses, cups, bowls, small plates. Fold-down cup holders.
  4. Cutlery basket: Knives (blade down), spoons, forks mixed for better cleaning.
  5. Ensure spray arms rotate freely, no items blocking water flow.
  6. Use recommended detergent amount based on water hardness and soil level.

CAUTION! Load sharp items with care. Place plastic items on upper rack only.

Care & Maintenance

Regular maintenance ensures long lifespan and optimal performance.

  1. Monthly cleaning: Run empty cycle with dishwasher cleaner or vinegar.
  2. Filter cleaning: Remove and rinse filters weekly under running water.
  3. Spray arms: Check monthly for clogs, clean holes with toothpick if needed.
  4. Door seals: Wipe clean with damp cloth, check for damage.
  5. Exterior: Clean with mild detergent, avoid abrasive cleaners.
  6. Winterizing: If unused in freezing temperatures, drain all water from system.

CAUTION! Unplug before maintenance. Do not use harsh chemicals that may damage seals.

Regulatory Information

CE certified: Complies with European safety standards. Energy label: A++ rating according to EU regulation 1059/2010. Waste electrical equipment: Do not dispose with household waste. Recycle according to local regulations. For support, visit www.ikea.com or contact IKEA customer service at your local store. Serial number located on right side of door frame.

Troubleshooting

SymptomPossible CauseCorrective Action
Dishwasher won't startDoor not closed properly/Power issueEnsure door latched securely; check power outlet; reset circuit breaker.
Poor cleaning resultsIncorrect loading/Detergent issueRearrange dishes for better water flow; use fresh detergent; check filter cleanliness.
Water not drainingDrain hose clogged/Filter blockedCheck drain hose for kinks; clean filter; ensure drain height correct.
Error code E1 displayedWater inlet problemCheck water supply valve; ensure inlet hose not kinked; clean inlet filter.
Loud noise during operationSpray arm obstructionCheck for items blocking spray arms; ensure racks properly positioned.
Detergent not dissolvingDispenser cloggedClean detergent dispenser; use recommended detergent; ensure compartment dry before loading.

Reset: Unplug for 5 minutes to reset electronic control. Hold Power + Start for 10 seconds for factory reset.

Service: Contact IKEA customer service for warranty claims. Keep proof of purchase for service requests.

IKEA RENGJORD 905.045.72 Dishwasher instructions manual © - All Rights Reserved 2025