IKEA REGNSKUR 793.926.08 Lamp Shade instructions manual

The IKEA REGNSKUR 793.926.08 is a stylish and functional lamp shade designed for use with compatible IKEA ceiling lamps. It features a durable, water-resistant fabric construction suitable for damp environments like bathrooms, a modern cylindrical design, and an E27 bulb socket (bulb not included). Below are key sections for safety, features, installation, care, and troubleshooting.

1. Features at a Glance 2. Included Parts 3. Safety Instructions 4. Installation Guide 5. Specifications 6. Care & Maintenance 7. Troubleshooting 8. Warranty & Support

Features at a Glance

Key components: Water-resistant fabric shade, Metal frame and suspension set, E27 bulb holder, Mounting hardware.

FeatureDescription
MaterialWater-resistant polyester fabric, metal frame
DesignCylindrical shape, modern aesthetic
Bulb SocketE27 (max wattage as specified on label)
Intended UseIndoor use, suitable for damp locations (e.g., bathrooms)
MountingCeiling mounted, includes suspension set for adjustable height
ColorAs per product variant (e.g., white, grey)

Included Parts

Unpack and verify all parts are present before starting installation.

  1. Lamp shade (fabric)
  2. Metal frame (top ring and bottom ring)
  3. Suspension set (cables and canopy)
  4. E27 bulb holder with wires
  5. Mounting hardware (screws, wall plugs)
  6. Instruction manual (this sheet)

WARNING! Do not discard any parts until assembly is complete. Check for damage.

Safety Instructions

Read all instructions before installation and use.

  1. Electrical Safety: Always turn off power at the circuit breaker before installation or maintenance.
  2. Bulb Selection: Use only E27 bulbs with wattage equal to or less than the maximum indicated on the lamp holder label. Do not use bulbs exceeding the specified wattage.
  3. Environment: This shade is designed for indoor use in damp locations. It is not waterproof for direct water spray or submersion.
  4. Installation: Ensure the ceiling can support the weight of the lamp. If unsure, consult a qualified electrician.
  5. Children: Keep packaging materials away from children to avoid risk of suffocation.

CAUTION! Risk of electric shock. Installation should be performed by a person with adequate knowledge of electrical systems, or by a qualified electrician.

Installation Guide

Follow these steps for safe and correct installation.

  1. Prepare the Area: Turn off the electricity at the main fuse box. Identify the ceiling electrical box location.
  2. Assemble the Frame: Attach the fabric shade to the metal frame (top and bottom rings) according to the pictorial guide included in the package. Ensure it is evenly stretched.
  3. Mount the Canopy: Secure the mounting canopy to the ceiling electrical box using the provided screws. Ensure it is firmly attached.
  4. Connect Wires: Connect the lamp wires (typically brown/blue for live/neutral and green/yellow for earth) to the corresponding house wiring in the ceiling box. Follow local electrical codes. Secure connections with wire nuts.
  5. Attach Suspension & Shade: Thread the suspension cables through the canopy and attach them to the top ring of the lamp shade frame. Adjust the cables to the desired length and secure.
  6. Final Check: Tuck all wires neatly into the canopy. Ensure the shade hangs straight. Install an appropriate E27 bulb.
  7. Power On: Restore power at the fuse box and test the lamp.

Tip: Use a second person to help hold the shade during assembly to avoid strain.

Specifications

Care & Maintenance

To ensure longevity and safety of your lamp shade.

  1. Cleaning: Always turn off and let the bulb cool before cleaning. Use a soft, dry or slightly damp cloth to wipe the fabric shade. Do not immerse in water or use abrasive cleaners, solvents, or chemicals.
  2. Fabric Care: The water-resistant coating may degrade over time. Avoid scrubbing vigorously.
  3. Metal Parts: Wipe with a dry cloth. If necessary, use a damp cloth and dry immediately.
  4. Bulb Replacement: Turn off power and allow bulb to cool. Unscrew the old bulb and screw in a new compatible E27 bulb, respecting the maximum wattage.

CAUTION! Never clean the lamp while it is connected to power. Do not use liquid or spray cleaners directly on the shade.

Troubleshooting

SymptomPossible CauseCorrective Action
Lamp does not turn onPower off / Faulty bulb / Loose connectionCheck circuit breaker. Replace bulb. Ensure power is on. If problem persists, check wiring connections (turn power off first).
Lamp flickersLoose bulb / Faulty bulb / Loose wiringTurn off power. Tighten bulb securely. Try a new bulb. Check wire connections in canopy.
Shade is sagging or unevenUneven suspension cables / Frame not assembled correctlyTurn off power. Adjust the length of each suspension cable evenly from the canopy. Re-check frame assembly.
Fabric appears stained or dirtyAccumulated dust or moisture marksClean gently with a soft, dry cloth. For tougher stains, use a cloth lightly dampened with mild soapy water, then wipe with a dry cloth. Do not soak.
Buzzing soundIncompatible bulb (e.g., old magnetic transformer with LED) / Loose partsEnsure you are using a compatible bulb type. Check that all screws in the canopy and frame are tightened.

Note: For any electrical issues beyond basic troubleshooting, contact a qualified electrician.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty terms provided in store or online for details on coverage period and conditions.

Recycling: At the end of its life, this product should not be disposed of with household waste. Please recycle according to local regulations for electrical and electronic equipment (WEEE).

For Support: Visit the IKEA website at www.ikea.com for your country, or contact your local IKEA store. Have the article number (793.926.08) and your receipt ready.

IKEA REGNSKUR 793.926.08 Lamp Shade instructions manual © - All Rights Reserved 2025