IKEA REGISSÖR 303.420.78 Cabinet instructions manual

The IKEA REGISSÖR 303.420.78 is a modern wall cabinet designed for storage in living rooms, bedrooms, or hallways. It features a clean design, adjustable shelves, and concealed mounting hardware. Below are key sections for safety, parts list, assembly, installation, care, and warranty information.

1. Parts & Hardware 2. Safety Instructions 3. Assembly Steps 4. Wall Mounting 5. Adjusting Shelves 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware

Before assembly, check that you have all parts listed below. The hardware pack is included in the package.

Part Name	Quantity	Description
Cabinet Frame	1	Main body with pre-drilled holes
Back Panel	1	Fiberboard panel
Adjustable Shelves	2	Glass shelves with support pins
Door	1	With hinges and handle
Wall Mounting Rail	1	Metal rail for secure mounting
Screws (6x50 mm)	8	For wall attachment
Shelf Support Pins	8	Small pins for shelf adjustment
Wall Plugs	8	For solid wall mounting
Cam Locks & Screws	4	For frame assembly
Instruction Manual	1	This document

Safety Instructions

Read all instructions before assembly. Ensure a safe working environment.

Work on a soft surface to avoid scratching parts.
Use correct tools: Phillips screwdriver, hammer, level, drill.
Check wall type: Cabinet must be mounted to solid wall (concrete, brick, or studs).
Two-person job: Assembly and mounting require at least two people.

WARNING! Improper wall mounting can cause cabinet to fall, resulting in serious injury or death. Always use provided hardware and mount into wall studs or solid masonry.

Assembly Steps

Follow steps in order. Do not fully tighten screws until all parts are aligned.

Attach back panel: Place frame face down. Align back panel and secure with provided screws.
Connect side panels: Use cam locks to connect sides to top and bottom panels. Tighten with screwdriver.
Install shelf supports: Insert support pins into pre-drilled holes at desired heights.
Attach door: Align hinges with pre-drilled holes on frame. Secure with screws. Adjust door alignment if needed.
Install handle: Attach handle to door using screws from inside.

Tip: Do not overtighten cam locks; this may strip the particleboard.

Wall Mounting

This is a critical step. Cabinet must be securely anchored to wall studs or solid masonry.

Locate wall studs using a stud finder. Mark positions.
Hold mounting rail against wall at desired height (use level). Mark screw holes.
Drill pilot holes at marks. Insert wall plugs if needed.
Screw mounting rail securely to wall.
Lift cabinet onto mounting rail (two people required). Ensure it clicks into place.
Secure cabinet to rail with provided safety screws from inside the cabinet.

CAUTION! The cabinet is heavy. Never attempt to mount it alone. Ensure rail is level before hanging cabinet.

Adjusting Shelves

Shelves are adjustable to accommodate items of different heights.

Remove shelf by lifting up and pulling forward.
Reposition shelf support pins to desired height (use pre-drilled holes).
Place shelf back onto support pins, ensuring it is level and secure.
Maximum load per glass shelf: 11 lbs (5 kg). Do not exceed.

Note: For stability, distribute weight evenly across the shelf.

Care & Maintenance

Clean regularly to maintain appearance.

Exterior surfaces: Wipe with a damp cloth and mild detergent. Dry immediately.
Glass shelves: Clean with glass cleaner and soft cloth.
Hardware: Check tightness of screws and hinges periodically.

WARNING! Do not use abrasive cleaners, scouring pads, or harsh chemicals. Avoid excessive moisture.

Specifications

Article Number: 303.420.78
Dimensions (W x H x D): 31.5" x 38.25" x 15.75" (80 cm x 97 cm x 40 cm)
Weight: 44 lbs (20 kg)
Material: Particleboard, Fiberboard, Tempered Glass, Steel
Color: White
Max Load (Cabinet): 55 lbs (25 kg) total distributed weight
Max Load (Per Shelf): 11 lbs (5 kg)
Required Tools: Phillips screwdriver, Hammer, Drill, Level, Stud finder

Troubleshooting

Problem	Possible Cause	Solution
Cabinet is not level	Wall rail not level; floor uneven	Re-mount rail using a level. Use shims if floor is uneven.
Door does not close properly	Hinges misaligned	Loosen hinge screws slightly, adjust door position, retighten.
Shelf wobbles	Support pins not fully inserted	Remove shelf, ensure all four pins are fully seated in holes.
Cam lock won't tighten	Cam lock stripped or misaligned	Check alignment of connecting parts. Replace cam lock if damaged.
Cabinet feels unstable	Not mounted to studs; screws loose	Ensure all mounting screws are in wall studs or solid masonry. Tighten all screws.

Warranty & Support

IKEA limited warranty applies. See IKEA terms and conditions for details.

For missing parts or assembly help: Contact IKEA customer service or visit the IKEA store where you made your purchase. Have the article number (303.420.78) ready.

Online resources: Visit www.ikea.com for assembly videos and guides.

Safety Notice: Keep this manual for future reference. Do not discard.