IKEA RAST 104.847.90 3 Drawer Chest instructions manual

The IKEA RAST 104.847.90 is a classic 3-drawer chest made from solid pine, offering simple, functional storage with a natural wood finish. Designed for easy self-assembly, it features three smooth-running drawers, a sturdy frame, and a timeless Scandinavian design. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Tools Required 3. Safety Instructions 4. Assembly Steps 5. Drawer Installation 6. Care & Maintenance 7. Specifications 8. Troubleshooting 9. Warranty & Support

Parts & Hardware Included

Before assembly, check that all parts are present and undamaged.

Part Number	Description	Quantity
A1	Side panel (left)	1
A2	Side panel (right)	1
B	Back panel	1
C	Top panel	1
D	Bottom panel	1
E1-E3	Drawer front	3
F1-F3	Drawer side (left)	3
G1-G3	Drawer side (right)	3
H1-H3	Drawer back	3
I1-I3	Drawer bottom	3
J	Drawer runner set	6 pairs
K	Cam lock screws	10
L	Wooden dowels	12
M	Wood screws	20
N	Drawer knobs	3

Tools Required

You will need the following tools (not included):

Phillips screwdriver
Hammer (for tapping dowels if needed)
Soft mallet (optional, for gentle adjustments)
Clean cloth
Level (optional, for final adjustment)

Safety Instructions

WARNING! Read all instructions before beginning assembly.

Work Area: Assemble on a clean, flat, protected surface to avoid scratches.
Lifting: The assembled chest is heavy. Use two people to move it.
Children: Keep small parts away from children during assembly to prevent choking.
Stability: Secure the chest to the wall using appropriate furniture anchors (not included) to prevent tipping.
Inspect Parts: Check for damaged or missing parts before starting. Do not force parts together.

Assembly Steps

Follow the steps in order. Do not fully tighten screws until the frame is square.

Step 1 - Frame Sides: Attach side panels (A1, A2) to the bottom panel (D) using cam locks (K) and dowels (L). Ensure the pre-drilled holes align.
Step 2 - Back Panel: Slide the back panel (B) into the grooves on the side and bottom panels. Secure with wood screws (M).
Step 3 - Top Panel: Place the top panel (C) onto the side panels. Secure from underneath using the remaining cam locks and dowels.
Step 4 - Square the Frame: Ensure the chest is square by measuring diagonally from corner to corner. Adjust if necessary, then fully tighten all cam locks.
Step 5 - Install Drawer Runners: Attach the drawer runner sets (J) to the inside of the frame according to the markings. Ensure they are level and parallel.

Tip: Lay a soft cloth under the panels during assembly to prevent surface damage.

Drawer Installation

Assemble and install the three drawers.

Drawer Assembly: For each drawer, connect the left side (F), right side (G), and back panel (H) to the drawer front (E) using dowels and cam locks. Slide the drawer bottom (I) into the groove and secure it.
Attach Knobs: Screw the knobs (N) onto the center of each drawer front from the front side.
Install Drawers: Slide the matching runner parts onto the drawer sides. Carefully align and push the drawer into the frame until it clicks into place. Test each drawer for smooth operation.
Alignment: If a drawer sticks or is uneven, slightly loosen the runner screws, adjust the drawer, and retighten.

Care & Maintenance

To maintain the appearance and longevity of your pine chest:

Cleaning: Dust regularly with a dry, soft cloth. For stains, use a damp cloth with mild soap and water, then dry immediately.
Protection: Avoid placing in direct sunlight or near heat sources to prevent wood from drying out or fading.
Drawers: Do not overload drawers beyond capacity. For smooth operation, occasionally clean the runner tracks with a dry cloth.
Finishing: The chest comes unfinished. You may apply IKEA stain, paint, or clear varnish to personalize and protect the wood.

CAUTION! Do not use abrasive cleaners, solvents, or steel wool on the wood surface.

Specifications

Product Name: RAST 3-drawer chest
Article Number: 104.847.90
Material: Solid pine, Pine veneer
Color: Natural pine, Unfinished
Dimensions (W x H x D): 28 ¾" x 37" x 19 ¼" (73 cm x 94 cm x 49 cm)
Drawer Dimensions (inner): Approx. 24" x 5 ½" x 15 ¾" (61 cm x 14 cm x 40 cm)
Weight: 44 lbs (20 kg)
Max Load per Drawer: 22 lbs (10 kg)
Package Dimensions & Weight: Check packaging label.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drawer sticks or won't close	Runners misaligned or obstructed	Loosen runner screws, realign drawer, and retighten. Check for obstructions inside.
Frame wobbles	Cam locks not fully tightened; frame not square	Check all cam locks are turned fully. Re-square the frame by adjusting diagonals.
Gaps between panels	Dowels not fully inserted	Disassemble the step, ensure dowels are fully seated in their holes, and reassemble.
Missing part	Part not in box or overlooked	Check all packaging material. Contact IKEA customer service with article number for replacement.
Wood splinter or crack	Damage during assembly or transport	Stop assembly. For minor splinters, sand gently. For cracks, contact IKEA for part replacement.

Warranty & Support

This IKEA product is covered by the IKEA Limited Warranty. For details, visit www.ikea.com or your local IKEA store.

Recycling: At end of life, disassemble and recycle materials according to local regulations.

Customer Support:
IKEA US: 1-888-888-4532
IKEA Canada: 1-866-866-4532
Website: www.ikea.com
Always have your article number (104.847.90) ready when contacting support.