IKEA RANARP 204.196.57 Floor Lamp instructions manual

The IKEA RANARP 204.196.57 is a modern floor lamp with an adjustable head, featuring a metal shade, steel construction, and a pull cord switch. Designed for indoor use, it provides focused task lighting and ambient illumination. Below are key sections for safety, assembly, installation, operation, care, and troubleshooting.

1. Features at a Glance 2. Parts & Tools Included 3. Assembly Instructions 4. Installation & Placement 5. Operation 6. Specifications 7. Care & Maintenance 8. Safety Information 9. Troubleshooting 10. Warranty & Support

Features at a Glance

Key components: Adjustable metal shade, steel stem and base, pull cord switch, E26/E27 socket (max 13W LED or equivalent).

Feature	Description
Adjustable Head	Shade can be tilted to direct light where needed
Pull Cord Switch	Easy on/off operation integrated into the cord
Stable Base	Weighted steel base for stability
Modern Design	Sleek black finish with industrial aesthetic
Compatible Bulb	E26/E27 base, max 13W LED or equivalent (not included)
Height	Approximately 57 inches (145 cm) total height

Parts & Tools Included

Unpack and verify all parts are present before assembly.

Base: 1 piece
Stem Sections: 3 pieces
Lamp Shade with Socket: 1 piece
Cord with Pull Switch: 1 piece
Screws & Hardware: Provided in small bag
Assembly Tool: Allen key (if required)
Instruction Manual: This document

WARNING! Do not discard packaging until assembly is complete and verified.

Assembly Instructions

Follow steps in order. Assembly requires approximately 15-20 minutes.

Prepare Workspace: Lay out all parts on a clean, soft surface to avoid scratches.
Attach Base: Insert the bottom stem section into the base. Secure with provided screw(s) using the Allen key.
Connect Stem Sections: Screw the middle and top stem sections together by hand until tight.
Attach Shade Assembly: Connect the lamp shade (with pre-installed socket) to the top of the stem. Ensure it is firmly seated.
Route Cord: Feed the cord with pull switch through the center of the stem sections and out the opening near the base.
Secure Cord: Use the cord clip (if provided) near the base to manage excess cord length.
Final Check: Ensure all connections are tight and the lamp stands upright without wobbling.

CAUTION! Do not overtighten screws. Assemble on a flat, stable surface.

Installation & Placement

Choose location carefully before plugging in.

Place lamp on a flat, level, and stable floor surface.
Ensure the location is away from high-traffic areas to prevent tipping.
Keep away from curtains, bedding, or other flammable materials.
Plug the cord into a standard 120V AC wall outlet.
Do not use with extension cords or power strips as a permanent solution.

Tip: For optimal task lighting, position the lamp so the shade is approximately 15-20 inches above the work surface (e.g., beside a chair or desk).

Operation

Operating the lamp is simple.

Install Bulb: Screw an E26/E27 base LED bulb (max 13W or equivalent) into the socket. DO NOT EXCEED THE MAXIMUM WATTAGE.
Turn On/Off: Use the pull cord switch on the lamp cord. Pull once for ON, pull again for OFF.
Adjust Light Direction: Gently tilt the metal shade to direct light upward, downward, or to the side as needed.

WARNING! Allow bulb to cool before touching shade. Always turn off and unplug before changing bulb or cleaning.

Specifications

Product Name: RANARP Floor Lamp
Article Number: 204.196.57
Material: Steel, Metal
Color: Black
Height: Approx. 57 in (145 cm)
Base Diameter: Approx. 7.9 in (20 cm)
Bulb Socket: E26/E27
Max Power: 13W LED or equivalent (Bulb not included)
Voltage: 120V AC, 60Hz
Cord Length: Approx. 6 ft (1.8 m)
Weight: Approx. 6.6 lbs (3 kg)

Care & Maintenance

Unplug lamp before any cleaning or maintenance.

Cleaning: Wipe the metal shade and stem with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or chemicals.
Bulb Replacement: Ensure lamp is off and unplugged. Allow old bulb to cool. Unscrew and replace with a compatible E26/E27 LED bulb (max 13W).
Cord Inspection: Periodically check the cord and plug for any damage. Do not use if cord is frayed or damaged.

CAUTION! Never immerse the lamp in water or other liquids.

Safety Information

Read all safety instructions before use.

This lamp is for INDOOR USE ONLY.
Use only with the specified bulb type and maximum wattage.
Keep out of reach of children and pets.
Do not place near heat sources (radiators, heaters).
Do not cover the lamp shade while in operation.
Disconnect from power supply before performing any maintenance.
If the external flexible cord is damaged, it must be replaced by the manufacturer, its service agent, or a qualified person.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not turn on	Bulb burnt out; not plugged in; faulty outlet	Replace bulb; ensure plug is firmly in working outlet; try another outlet.
Lamp flickers	Loose bulb; incompatible bulb	Turn off, unplug, and tighten bulb. Ensure bulb is LED and meets specifications.
Lamp wobbles	Uneven floor; loose assembly	Move to level surface. Check and tighten all stem and base connections.
Shade does not stay adjusted	Adjustment joint may be loose	Gently tighten the pivot point on the shade (if designed to be user-tightened).
Pull cord switch feels loose	Normal operation; internal mechanism issue	Operate gently. If switch fails completely, contact IKEA support.

Note: Do not attempt to repair electrical parts yourself.

Warranty & Support

IKEA products come with a limited warranty. Refer to the IKEA warranty document included with your purchase or available at IKEA stores.

For Assembly Help, Parts, or Support:

Visit: www.ikea.com
Contact your local IKEA store.
Refer to your purchase receipt for model and article number (204.196.57).

Recycling: At end of life, dispose of this product according to local electronic/electrical equipment recycling regulations. Do not dispose with household waste.