IKEA RANARP 104.162.73 Spotlight instructions manual

The IKEA RANARP 104.162.73 is a modern, adjustable spotlight designed for focused illumination in various settings. It features a flexible arm for directional control, a durable metal construction, and an integrated LED light source. Below are key sections for safety, features, installation, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Adjusting the Spotlight 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable metal arm, LED light source, wall mounting bracket, power cable, and installation hardware.

Feature	Description
Adjustable arm	Flexible metal arm for directing light precisely
LED light source	Energy-efficient, long-lasting integrated LED
Wall mounting bracket	For secure installation on walls or ceilings
Power cable	Standard power cord with plug
Installation hardware	Screws and wall plugs included
On/Off switch	Integrated switch on the cable or fixture
Dimmable option	Compatible with external dimmers (if specified)
Finish	Black or white powder-coated metal
Beam angle	Adjustable focus for spot or flood lighting
Warranty	Limited warranty as per IKEA policy

Installation

Unpack and inspect contents. Ensure you have the correct tools (screwdriver, drill, level).

Choose location: Select a sturdy wall or ceiling area near a power outlet.
Mark mounting points: Use bracket as template to mark screw holes.
Drill holes: Insert wall plugs if needed (for solid walls).
Attach bracket: Secure bracket with provided screws.
Mount spotlight: Attach the spotlight arm to the bracket.
Connect power: Plug into nearby outlet.

WARNING! Ensure power is turned off at the circuit breaker before installation. Use appropriate safety gear.

First-Time Setup

After installation, test the spotlight and adjust as needed.

Power on: Switch on at the fixture or wall outlet.
Test light: Ensure LED illuminates properly.
Adjust arm: Bend arm to direct light where needed.
Secure position: Tighten any adjustment knobs to lock in place.

CAUTION! Do not over-tighten adjustment joints. Avoid bending arm beyond its designed range.

Specifications

Model: RANARP 104.162.73
Light Source: Integrated LED
Power Consumption: [Insert wattage, e.g., 10W]
Lumen Output: [Insert lumens, e.g., 800 lm]
Color Temperature: [e.g., 2700K warm white]
Voltage: 120V AC, 60Hz (or as per region)
Adjustability: 360-degree arm rotation, 180-degree head tilt
Mounting: Wall or ceiling
Dimensions: [Insert approximate dimensions]
Weight: [Insert weight]

Controls and Settings

Primary control is via the integrated On/Off switch. If dimmable, use compatible external dimmer.

Adjustment: Manually position arm and head. No remote control included.

Settings: No electronic settings; adjust physically only.

Connecting to Power

Plug directly into standard wall outlet. Ensure outlet is grounded and rated appropriately.

Turn off power at circuit breaker.
Plug cable into outlet.
Restore power and test.

Tip: Use a surge protector for added safety.

Adjusting the Spotlight

Adjust arm and head to direct light.

Loosen adjustment joints slightly.
Position arm and head as desired.
Tighten joints to secure position.
Test light direction.

WARNING! Do not force adjustments. Support arm while adjusting to prevent strain.

Safety Features

Overheat protection (if built-in). Ensure proper ventilation. Do not cover light source.

Care & Cleaning

Unplug before cleaning. Wipe with dry, soft cloth. Do not use liquids or abrasive cleaners.

CAUTION! Do not immerse in water. Avoid contact with chemicals.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power issue	Check outlet; ensure switch is on; test with another device.
Light flickers	Loose connection	Check plug and cable; ensure secure connection.
Arm won't stay in position	Loose joint	Tighten adjustment knob; avoid overloading arm.
Overheating	Ventilation blocked	Ensure clear space around light; check for obstructions.
Dim light	End of life (LED)	LED may need replacement; contact IKEA for service.

Reset: Not applicable; no electronic reset function.

Service: Contact IKEA customer service or visit www.ikea.com.