IKEA RAMSELE 104.071.03 Lighting instructions manual

The IKEA RAMSELE 104.071.03 is a ceiling/wall lamp designed for indoor use. This manual provides essential information for safe installation, operation, and maintenance. It includes LED light source specifications, assembly steps, electrical connection guidelines, usage instructions, care recommendations, and troubleshooting advice. Please read all instructions carefully before installation and keep this manual for future reference.

1. Safety Information 2. Package Contents 3. Product Overview & Specifications 4. Installation Instructions 5. Electrical Connection 6. Operation & Dimming 7. Care & Maintenance 8. Troubleshooting 9. Warranty & Disposal

Safety Information

Read all safety warnings before installation and use.

Symbol/Note	Meaning
WARNING!	Risk of electric shock. Disconnect power at fuse box before installation.
CAUTION!	Risk of injury or damage. Ensure mounting surface is solid and can support the lamp's weight.
NOTE	This luminaire is designed for indoor use only. Not suitable for bathrooms or other damp locations unless specifically rated.
LED Symbol	Contains non-replaceable LED light source. The entire luminaire must be replaced at end of life.

Installation should be performed by a qualified electrician in accordance with local building and electrical codes.

Package Contents

Before starting, verify all parts are present.

Lamp shade/body (RAMSELE) - 1 pc
Mounting bracket - 1 pc
Fixation screws - 2 pcs
Wall plugs - 2 pcs (for solid walls)
Instruction manual (this document) - 1 pc

NOTE: Light source is integrated. Bulbs are not included as they are not required.

Product Overview & Specifications

Article Number: 104.071.03
Product Name: RAMSELE
Type: Ceiling/Wall lamp
Light Source: Integrated LED
Power Consumption: [e.g., 10W] (Check product label)
Luminous Flux: [e.g., 800 lm]
Color Temperature: [e.g., 2700K Warm White]
CRI (Color Rendering Index): >80
Input Voltage: 100-240V AC, 50/60Hz
Dimmable: Yes / No (Check product label. If yes: "Compatible with leading-edge/trailing-edge dimmers.")
Material: [e.g., Steel/Plastic/Textile]
Dimensions: Ø [Diameter] x H [Height] cm
Weight: [e.g., 0.8 kg]
Protection Class: IP20 (For dry indoor locations)
Estimated Lifetime: [e.g., 25,000 hours]

Installation Instructions

WARNING! TURN OFF POWER AT THE FUSE BOX/CIRCUIT BREAKER BEFORE BEGINNING.

Choose Location: Select a suitable ceiling or wall location. Ensure it is away from heat sources and flammable materials.
Mark & Drill: Hold the mounting bracket against the surface. Mark the positions of the screw holes. Drill holes and insert wall plugs (if needed).
Mount Bracket: Secure the mounting bracket to the surface using the provided screws.
Prepare Wires: At the installation point, you should have three wires from your household circuit: Live (L/brown/black), Neutral (N/blue/white), and Earth/Ground (⏚/green-yellow).
Connect Wires (See next section): Proceed to electrical connection.
Attach Lamp: Once wires are connected and safely tucked into the junction box, align the lamp body with the mounting bracket. Secure it according to the design (e.g., twist, clip, or use locking screws).

Electrical Connection

MUST BE DONE BY A QUALIFIED ELECTRICIAN.

Ensure power is OFF.
Connect the lamp's wires to your household wiring:
- Lamp Live (L/brown) → Household Live (L)
- Lamp Neutral (N/blue) → Household Neutral (N)
- Lamp Earth (⏚/green-yellow) → Household Earth (⏚)
Use appropriate wire connectors (e.g., screw terminal block, wire nuts) and ensure no bare wire is exposed.
Secure all connections and wires neatly inside the ceiling/wall junction box.

Tip: Double-check connections against the wiring diagram often found on the lamp or its packaging.

Operation & Dimming

Once installed, restore power at the fuse box.

Turning On/Off: Use the wall switch connected to the lamp's circuit.
Dimmable Models: If your RAMSELE model is dimmable, use it with a compatible LED dimmer switch. Incompatible dimmers may cause flickering, buzzing, or reduced lifespan.
- If flickering occurs, try adjusting the dimmer's low-end trim setting or consult the dimmer's manual.
Non-Dimmable Models: Do NOT connect to a dimmer switch. This will damage the LED driver.

Care & Maintenance

WARNING! ALWAYS TURN OFF POWER AND LET THE LAMP COOL BEFORE CLEANING.

Unplug or switch off the circuit.
Use a dry, soft cloth (e.g., microfiber) to dust the lamp shade and body.
For more stubborn dirt, use a slightly damp cloth. Wring it out thoroughly.
DO NOT use abrasive cleaners, solvents, or chemical sprays.
DO NOT immerse the lamp in water or other liquids.

CAUTION! The LED light source is non-replaceable. Do not attempt to open or repair the luminaire.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lamp does not light up	Power is off / Faulty switch / Loose connection	Check fuse/circuit breaker. Ensure wall switch is on. Verify all wire connections are tight. Contact an electrician.
Lamp flickers	Incompatible dimmer / Loose connection / Driver issue	If dimmable, check dimmer compatibility. Tighten all connections. If problem persists, the product may be faulty.
Buzzing sound	Incompatible dimmer / Transformer hum	Common with some dimmers. Try a different compatible dimmer model.
Reduced light output	End of LED life / Power supply issue	LEDs gradually lose brightness over time. If significantly dim, the product may need replacement.

Warranty & Disposal

Warranty: This IKEA product is guaranteed under the terms of IKEA's commercial warranty. Refer to the IKEA warranty leaflet for full details or visit www.ikea.com.

Disposal: This product is subject to the European Directive 2012/19/EU (WEEE). Do not dispose of with household waste. At the end of its life, take it to a designated collection point for the recycling of electrical and electronic equipment. Contact your local authority for disposal information. Help recycle for a better environment.

Support: For more information, assembly help, or spare parts, visit www.ikea.com or contact your local IKEA store.