IKEA RÖNNINGE 105.074.90 Bench instructions manual

The IKEA RÖNNINGE 105.074.90 is a versatile wooden bench designed for indoor use, featuring a clean Scandinavian design, solid wood construction, and a durable lacquered finish. It requires assembly and comes with all necessary hardware and tools. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware Included 2. Safety Information 3. Assembly Instructions 4. Dimensions & Specifications 5. Care & Maintenance 6. Weight Capacity & Usage 7. Troubleshooting 8. Warranty & Support

Parts & Hardware Included

Before assembly, verify all parts are present. Contact IKEA if any items are missing.

Part DescriptionQuantityImage Ref.
Bench seat (solid wood panel)1A
Bench leg (front/back)4B
Side support rail2C
Wooden dowels (8mm)8D
Cam lock screws4E
Allen key (4mm)1F
Wood glue packet1G
Protective felt pads4H

Safety Information

Read all instructions before assembly. Keep children and pets away during assembly.

  1. Assemble on a soft, clean surface to avoid scratches.
  2. Use only provided tools and hardware.
  3. Ensure all connections are tight and secure before use.
  4. Do not stand or jump on the bench.

WARNING! Bench is heavy; lift with care using two people. Keep small hardware away from children to prevent choking.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Follow steps in order.

  1. Prepare parts: Lay out all parts as shown in diagram. Identify parts A-H.
  2. Attach legs to side rails: Insert dowels (D) into pre-drilled holes in legs (B). Apply wood glue (G) to dowels. Align with side rails (C) and press firmly together.
  3. Secure with cam locks: Insert cam lock screws (E) into side rails and tighten with Allen key (F) until fully locked. Wipe excess glue immediately.
  4. Attach bench seat: Place seat panel (A) upside down on soft surface. Position assembled leg frames on seat, aligning pre-drilled holes. Insert remaining dowels with glue, then secure with cam locks.
  5. Final check: Turn bench upright. Ensure all joints are tight and bench sits level on floor.
  6. Apply felt pads: Peel backing from felt pads (H) and attach to bottom of each leg to protect flooring.

CAUTION! Do not overtighten screws; this may strip the wood. Allow glue to dry 2 hours before use.

Dimensions & Specifications

Care & Maintenance

To maintain appearance and longevity, follow these care instructions.

Cleaning: Wipe with a soft, slightly damp cloth. Dry immediately. Do not use abrasive cleaners, solvents, or ammonia-based products.

Protection: Avoid prolonged exposure to direct sunlight, heat sources, or high humidity. Use coasters under drinks to prevent rings.

Refinishing: Light scratches can be touched up with IKEA BEHANDLA wood stain (sold separately).

CAUTION! Never soak or immerse bench in water. Do not place near radiators or fireplaces.

Weight Capacity & Usage

Designed for seating only. Maximum load: 330 lbs (150 kg) evenly distributed.

  1. Use indoors only. Not suitable for outdoor or damp environments.
  2. Do not use as a step ladder, shelf, or for standing.
  3. Place on a flat, level surface. Adjust felt pads if bench wobbles.
  4. For entryway use, wipe feet dry before sitting to avoid water damage.

Tip: For dining table use, ensure bench height matches table clearance (typically 12 inches/30cm between seat and table underside).

Troubleshooting

IssuePossible CauseSolution
Bench wobblesUneven floor; loose jointsAdjust felt pads; tighten all cam locks with Allen key.
Dowels not fittingMisaligned holes; excess glueEnsure parts are oriented correctly; clean dried glue from holes.
Cam lock won't tightenCross-threaded or strippedLoosen completely, realign, and retighten gently.
Scratches on surfaceAssembly on hard surfaceUse BEHANDLA touch-up pen; assemble on carpet or blanket next time.
Glue stains on finishExcess glue not wipedWipe immediately with damp cloth; for dried glue, gently scrape with plastic edge.

Replacement Parts: Contact IKEA customer service for missing or damaged parts. Provide article number 105.074.90.

Warranty & Support

IKEA Limited Warranty: 10 years for structural integrity under normal household use. Does not cover damage from accidents, misuse, or improper assembly. Proof of purchase required.

For assembly help, missing parts, or product questions:

© Inter IKEA Systems B.V. 2025. RÖNNINGE is a trademark of Inter IKEA Systems B.V.

IKEA RÖNNINGE 105.074.90 Bench instructions manual © - All Rights Reserved 2025