IKEA PÄRUP 193.898.35 3 Seat Frame instructions manual

The IKEA PÄRUP 193.898.35 is a 3-seat sofa frame designed for assembly at home. This manual provides essential information for safe and correct assembly, use, and care of your sofa frame. It includes safety warnings, parts identification, step-by-step assembly instructions, maintenance guidelines, and warranty information. Please read all instructions carefully before beginning assembly.

1. Safety Information 2. Parts & Hardware 3. Tools Required 4. Assembly Instructions 5. Attaching Cushions & Covers 6. Care & Maintenance 7. Weight Limit & Dimensions 8. Troubleshooting 9. Warranty & Support

Safety Information

Important warnings and precautions for safe assembly and use.

Warning	Description
Heavy Parts	Frame components are heavy. Use two people for lifting and assembly to prevent injury.
Stable Surface	Assemble on a clean, soft, level surface to avoid scratching the frame or parts.
Child Safety	Keep small hardware (screws, dowels, cam locks) away from children during assembly.
Correct Tools	Use only the recommended tools. Overtightening can damage the wood or fittings.
Check Tightness	Periodically check that all screws and connectors are tight to ensure frame stability.

Parts & Hardware

Identify all parts from the packaging before starting. Check against this list.

Main Frame Sections: Left arm, Right arm, Seat base panel, Backrest panel.
Support Beams: Front rail, Rear rail, Center support beam.
Connectors: Wooden dowels (8x), Cam locks (6x), Screws (various sizes).
Legs: 4x sofa legs with pre-attached fittings.
Accessories: Allen key (provided), plastic wrench for cam locks.

IMPORTANT! Do not discard any packaging until assembly is complete and all parts are verified.

Tools Required

Tools needed for assembly. The provided Allen key is sufficient for basic assembly.

Allen key (included in hardware pack).
Phillips screwdriver (optional, for some screw types).
Soft mallet or hammer (for gently tapping dowels).
Clean cloth (to protect surfaces).

NOTE: Power tools can be used on low torque settings but are not recommended for final tightening.

Assembly Instructions

Step 1 - Prepare: Unpack all parts in the room where the sofa will be used. Sort hardware.
Step 2 - Attach Legs: Turn seat base panel upside down on a protected surface. Screw the four legs into the pre-drilled holes at each corner.
Step 3 - Connect Arms: Insert wooden dowels into the side of the seat base. Align the left and right arm sections, then connect using the provided cam locks. Tighten with the Allen key.
Step 4 - Install Support Beams: Slide the front and rear rails into the slots on the inside of the arms. Secure the center support beam to the seat base using screws.
Step 5 - Attach Backrest: Place the backrest panel onto the rear of the frame. Secure it from the underside using the long screws provided.
Step 6 - Final Check: Turn the frame right-side up. Ensure all connections are tight and the frame is stable and does not wobble.

Attaching Cushions & Covers

Once the frame is assembled, add the seat and back cushions.

Place the seat cushions onto the seat base panel. They should fit snugly against the arms.
Position the back cushions against the backrest. Some covers may have zippers or straps to secure them to the frame.
For loose covers: Smooth the fabric over the cushions, ensuring it is even and taut.
Check that all cushion Velcro or attachment points are secured to the frame to prevent slipping.

Tip: Fluff and rotate cushions periodically to maintain shape and even wear.

Care & Maintenance

Proper care extends the life of your sofa frame and upholstery.

Frame: Wipe with a dry or slightly damp cloth. Do not use abrasive cleaners.
Upholstery: Follow the care label on your specific cushion covers. Most IKEA fabrics are removable and machine washable.
Regular Check: Every 3-6 months, check and tighten any loose screws or cam locks.
Sunlight & Heat: Avoid prolonged direct sunlight to prevent fading. Keep away from direct heat sources.

Weight Limit & Dimensions

Specification	Detail
Maximum Weight Capacity	660 lbs (300 kg) distributed evenly
Overall Dimensions (Assembled)	Width: 86.6" (220 cm), Depth: 37.4" (95 cm), Height: 33.5" (85 cm)
Seat Height	17.7" (45 cm)
Seat Depth	22.8" (58 cm)
Frame Material	Particleboard, Fiberboard, Solid Wood, Polyurethane foam

Troubleshooting

Issue	Possible Cause	Solution
Frame wobbles	Uneven floor or loose legs	Check floor level; ensure all legs are tightened securely. Use furniture pads if needed.
Squeaking noise	Wood rubbing or loose joints	Tighten all cam locks and screws. Apply a small amount of furniture wax on wooden contact points.
Cam lock won't tighten	Dowel not fully inserted	Disassemble the joint, ensure the dowel is fully seated in both holes, then re-engage the cam lock.
Part seems missing	Packaging error	Check all boxes and packaging material thoroughly. Contact IKEA customer support with your article number (193.898.35).
Difficulty aligning parts	Frame might be upside down or backwards	Refer to the diagram in the manual. Ensure you are following the steps in the correct order.

Warranty & Support

This IKEA product is covered by a limited warranty. Refer to the IKEA warranty booklet included in your purchase or available at IKEA stores.

For Assembly Help: Visit the IKEA website and search for "PÄRUP 193.898.35" to access digital assembly instructions and videos.
For Missing Parts: Contact IKEA Customer Support at 1-888-888-4532 or visit your local IKEA store.
Online Resources: www.ikea.com

Disclaimer: IKEA shall not be liable for damages resulting from improper assembly, modification, or use not in accordance with this manual.