IKEA PÄRONHOLMEN 905.037.99 Bench instructions manual

The IKEA PÄRONHOLMEN 905.037.99 is a sturdy outdoor bench designed for durability and comfort. Constructed from weather-resistant materials, it features a slatted seat and backrest for ventilation, a robust frame, and a classic design suitable for patios, gardens, or balconies. Below are key sections for safety, parts list, assembly instructions, care, and warranty information.

1. Parts & Hardware 2. Safety Information 3. Assembly Instructions 4. Care & Maintenance 5. Specifications 6. Troubleshooting 7. Warranty & Support

Parts & Hardware

All components included in the package. Check contents before assembly.

Part NameQuantityDescription
Bench Seat Frame1Main seat structure with pre-attached slats
Bench Backrest1Backrest frame with slats
Side Legs2Support legs with pre-drilled holes
Cross Braces2Stabilizing bars for under-seat support
Wood Screws (4x40mm)16For attaching backrest and braces
Allen Key1Tool for tightening screws
Assembly Manual1This document

Note: Some parts may be pre-assembled. Hardware count may vary; contact IKEA if any items are missing.

Safety Information

Read all instructions before assembly. Ensure a safe environment.

  1. Work Area: Use a clean, flat surface with enough space.
  2. Tools: Use only the provided Allen key or recommended tools.
  3. Lifting: Bench is heavy; use two people for handling.
  4. Children & Pets: Keep away during assembly to avoid injury.
  5. Inspect Parts: Check for damage before assembly; do not use defective parts.

WARNING! Do not stand on the bench. Maximum load: 200 kg (440 lbs) distributed evenly. Use only outdoors in covered areas to prolong lifespan.

Assembly Instructions

Estimated assembly time: 30-45 minutes. Follow steps in order.

  1. Step 1: Lay the seat frame upside down on a soft surface (e.g., carpet) to prevent scratches.
  2. Step 2: Attach the two side legs to the seat frame using 4 screws per leg (8 total). Tighten securely with Allen key.
  3. Step 3: Attach the cross braces between the legs using 4 screws per brace (8 total). Ensure braces are flush.
  4. Step 4: Turn the bench upright. Attach the backrest to the seat frame using the remaining 8 screws. Ensure backrest is aligned correctly.
  5. Step 5: Check all screws are tight. Wipe clean with a dry cloth.

Tip: Do not overtighten screws to avoid stripping. Assemble on a level surface to ensure stability.

Care & Maintenance

Proper care extends the bench's life. Use recommended methods only.

CAUTION! Do not use pressure washers, bleach, or solvents. Do not sand or paint unless using IKEA-approved products.

Specifications

Troubleshooting

IssuePossible CauseSolution
Bench wobblesUneven surface or loose screwsPlace on level ground; tighten all screws with Allen key.
Screws not tighteningStripped threads or misalignmentEnsure parts are aligned; do not force. Contact IKEA for replacement hardware.
Wood cracks or splintersDamage during assembly or weatherSand lightly with fine sandpaper; apply wood filler if needed. Avoid excessive force.
DiscolorationSun exposure or moistureClean regularly; apply wood protector. Normal aging may occur.
Missing partsPackage incompleteCheck all packaging materials. Visit IKEA store or contact customer service.

Note: For persistent issues, disassemble and reassemble following steps carefully.

Warranty & Support

IKEA offers a 10-year limited warranty covering material and manufacturing defects under normal residential use. Warranty does not cover damage from misuse, improper assembly, or lack of maintenance.

Contact Information:

Safety Standards: Meets ANSI/BIFMA standards for outdoor furniture. Recyclable materials; dispose of according to local regulations.

IKEA PÄRONHOLMEN 905.037.99 Bench instructions manual © - All Rights Reserved 2025